iTeh Standards logo
EURUSD
Your shopping cart is empty.
ISO

ISO 8009-5:1996

(Main)

Reusable rubber contraceptive diaphragms - Part 5: Determination of tensile properties

Reusable rubber contraceptive diaphragms - Part 5: Determination of tensile properties

Describes a method for determining the tensile properties of the dome of reusable rubber contraceptive diaphragms. Replaces the first edition.

Diaphragmes contraceptifs réutilisables en caoutchouc — Partie 5: Détermination des propriétés de résistance à la traction

General Information

Status
Withdrawn
Publication Date
25-Dec-1996
Withdrawal Date
25-Dec-1996
ICS
11.200 - Birth control. Mechanical contraceptives
Technical Committee
ISO/TC 157 - Non-systemic contraceptives and STI barrier prophylactics
Drafting Committee
ISO/TC 157 - Non-systemic contraceptives and STI barrier prophylactics
Current Stage
9599 - Withdrawal of International Standard
Start Date
22-Sep-2004
Completion Date
13-Dec-2025
Ref Project

Relations

Revises
ISO 8009-5:1985 - Reusable rubber contraceptive diaphragms - Part 5: Determination of tensile properties
Effective Date
15-Apr-2008
Revised
ISO 8009:2004 - Mechanical contraceptives - Reusable natural and silicone rubber contraceptive diaphragms - Requirements and tests
Effective Date
15-Apr-2008
ISO 8009-5:1996 - Reusable rubber contraceptive diaphragmsISO 8009-5:1996 - Reusable rubber contraceptive diaphragms
PreviousNext
Standard
ISO 8009-5:1996 - Reusable rubber contraceptive diaphragms
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Frequently Asked Questions

ISO 8009-5:1996 is a standard published by the International Organization for Standardization (ISO). Its full title is "Reusable rubber contraceptive diaphragms - Part 5: Determination of tensile properties". This standard covers: Describes a method for determining the tensile properties of the dome of reusable rubber contraceptive diaphragms. Replaces the first edition.

Describes a method for determining the tensile properties of the dome of reusable rubber contraceptive diaphragms. Replaces the first edition.

ISO 8009-5:1996 is classified under the following ICS (International Classification for Standards) categories: 11.200 - Birth control. Mechanical contraceptives. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 8009-5:1996 has the following relationships with other standards: It is inter standard links to ISO 8009-5:1985, ISO 8009:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase ISO 8009-5:1996 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.

Standards Content (Sample)


INTERNATIONAL ISO
8009-5
STANDARD
Second edition
1996-12-15
Reusable rubber contraceptive
diaphragms -
Determination of tensile
Part 5: -
properties
Diaphragmes contraceptifs r6utilisables en caoutchouc -
Partie 5: Defermination des propriktes de ksistance A Ia traction
Reference number
ISO 8009-5: 1996(E)
ISO 8009-5: 1996(E)
Contents
........................................................................................................................................................................ 1
1 Scope
2 Normative reference . 1
.................................................................................................................................................................... 1
3 Principle
4 Apparatus . 1
......................................................................................................................................... 1
5 Preparation of test piece
................................................................................................................................................................. 2
6 Procedure
.............................................................................................................................................. 2
7 Expression of results
................................................................................................................................................................ 2
8 Test report
0 ISO 1996
All rights reserved. Unless otherwise specified, no patt of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case postale 56 l CH-121 1 Geneve 20 l Switzerland
Internet central@ isocs.iso.ch
x.400 c=ch; a=40Onet; p=iso; o=isocs; s=central
Printed in Switzerland
0 ISO
ISO 8009-5: 1996(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Esch member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 8009-5 was prepared by Technical Committee ISOTTC 157, Mechanical contraceptives.
This second edition cancels and replaces the first edition (ISO 8009~5:1985), of which it constitutes a minor revision.
ISO 8009 consists of the following Parts, under the general title ßeusable rubber contraceptive diaphragms.
Parf 1: Classifica tion, sampling and requirements
Part 2: Determination of size
Part 3: Determination of dome thickness
Pari 4: Freedom from visible defects
Part 5: Determination of tensile properfies
Part 6: Determination of deteriora tion after accelera ted ageing
Part 7: Determination of compression resistance of coil spring and flat spring diaphragms
Part 8: Determination of twisting during compression of coil spring and flat spring diaphragms
Part 9: Packaging and labelling
Part IO: ß
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO
ISO/TS 23148:2024(Main)
Compatibility of lubricants with synthetic male condoms

This document provides guidance on assessing the effect or compatibility of an additional or personal lubricant with synthetic male condoms (excluding synthetic polyisoprene condoms). It also applies to topical medicines and any other substances that come into contact with such condoms. It describes the measurement of changes in physical properties of the condoms after exposure to the test substance (i.e. lubricant, topical medicine, etc.) and specifies the pass/fail criteria for such changes. This document is intended to be used for evaluating the compatibility of chosen additional lubricants or topical medicines with chosen synthetic condoms. Each lubricant type is evaluated specifically against each condom material for which compatibility is claimed. This document is not applicable to the assessment of the compatibility of lubricants applied to a condom at the time of manufacture. It is not directly applicable to female condoms, although similar principles can apply.

  • Technical specification
    16 pages
    English language
    sale 15% off
ISO
ISO 7439:2023(Main)
Copper-bearing contraceptive intrauterine devices - Requirements and tests

This document specifies requirements and tests for single-use, copper-bearing contraceptive intrauterine devices (IUDs) and their insertion instruments. It is not applicable to IUDs consisting only of a plastics body or whose primary purpose is to release progestogens or other medicinal products. NOTE Some aspects of this document can be applicable to medicated intrauterine devices and IUDs not containing copper.

  • Standard
    16 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off
ISO
ISO/TR 24484:2023(Main)
Female condoms - Use of ISO 25841 and the quality management of female condoms

This document gives the essential principles in the application of ISO 25841. It outlines the details of elements applicable in quality management of female condoms as required by related normative standards, as referred in ISO 25841 and other relevant concepts. This document supplements the use of ISO 25841 and addresses quality management aspects to be considered during the development, manufacture, quality verification and procurement of female condoms. It encompasses the principles of quality management systems in design, manufacture, and delivery of female condoms with emphasis on their performance, safety and reliability. This document is applicable to female condoms made of natural rubber or synthetic rubber or synthetic polymers and the retention devices which form the integral components of female condoms. NOTE Female condoms made from either natural rubber latex or synthetic rubber or other synthetic polymeric materials are addressed in ISO 25841.

  • Technical report
    13 pages
    English language
    sale 15% off
ISO
ISO 25841:2017/Amd 1:2020(Amendment)
Female condoms - Requirements and test methods - Amendment 1
  • Standard
    1 page
    English language
    sale 15% off
ISO
ISO 19351:2019(Main)
Fallopian rings - Requirements and test methods

This document specifies the minimum requirements and test methods for fallopian rings used for tubal occlusion in women for permanent contraception. This document does not address the applicator or other accessories used to place the fallopian rings.

  • Standard
    27 pages
    English language
    sale 15% off
ISO
ISO 19671:2018(Main)
Additional lubricants for male natural rubber latex condoms - Effect on condom strength

This document specifies a method of assessing the effect or compatibility of an additional or personal lubricant with lubricated male natural rubber latex condoms. It also applies to topical medicines and any other substances that come into contact with such condoms. It describes the measurement of changes in physical properties of the condoms after exposure to the test substance (i.e. lubricant, topical medicine, etc.) and specifies the pass/fail criteria for such changes. This document is not applicable to the assessment of the compatibility of lubricants applied to a condom at the time of manufacture. It is not directly applicable to the assessment of the compatibility of a particular condom with lubricants or other substances. It is not directly applicable to tests using female condoms, although similar principles can apply. The test methods are applicable to condoms made from natural rubber latex and from synthetic materials, but a pass/fail criterion is only stipulated for natural rubber latex.

  • Standard
    15 pages
    English language
    sale 15% off
ISO
ISO/TR 19969:2018(Main)
Guidance on sample handling for determination of bursting volume and pressure, and testing for freedom from holes for male condom

This document gives guidance on the procedures for sample preparation for determining bursting volume and pressure and testing male condoms for freedom from holes.

  • Technical report
    9 pages
    English language
    sale 15% off
ISO
ISO 11249:2018(Main)
Copper-bearing intrauterine contraceptive devices - Guidance on the design, execution, analysis and interpretation of clinical studies

ISO 11249:2018 provides guidance on the design and conduct of clinical studies to determine the performance characteristics of new intrauterine devices. It also provides advice on the analysis of data when the study is completed, as well as interpretation of these results by manufacturers, researchers and regulatory bodies. ISO 11249:2018 is intended to ensure the scientific conduct of the clinical investigation and the credibility of the clinical investigation results, and to assist sponsors, monitors, investigators, ethics committees, regulatory authorities and other bodies involved in the conformity assessment of medical devices. Certain clinical trial concerns are not addressed in this document, including subject compensation, confidentiality of subjects and their records, use of local ethics committees, etc. These and many other clinical trial design issues are covered in great detail in ISO 14155.

  • Standard
    23 pages
    English language
    sale 15% off
ISO
ISO 16038:2017(Main)
Male condoms - Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms

ISO 16038:2017 provides guidance on using ISO 4074 and ISO 23409 and addresses quality issues to be considered during the development, manufacture, quality verification and procurement of condoms. It encompasses the aspects of quality management systems in the design, manufacture and delivery of condoms with an emphasis on performance, safety and reliability. Male condoms are either made from essentially natural rubber latex, in which case the requirements of ISO 4074 are applicable, or from synthetic materials and/or blends of synthetic materials and natural rubber latex, in which case the requirements of ISO 23409 are applicable. This document outlines the aspects applicable to both types of condoms with specific clarifications where appropriate.

  • Standard
    12 pages
    English language
    sale 15% off
ISO
ISO 25841:2017(Main)
Female condoms - Requirements and test methods

ISO 25841:2017 specifies the minimum requirements and test methods for female condoms that are supplied to consumers for contraceptive purposes and for assisting in the prevention of sexually transmitted infections (STIs).

  • Standard
    54 pages
    English language
    sale 15% off