ISO 5609-6:2012
(Main)Tool holders for internal turning with cylindrical shank for indexable inserts - Part 6: Style Q
Tool holders for internal turning with cylindrical shank for indexable inserts - Part 6: Style Q
ISO 5609 6:2012 specifies the characteristics of tool holders for internal turning with cylindrical shank, style Q, i.e. with reduced shank and cutting edge angle equal to 107,5°. These tool holders are primarily intended for indexable inserts made of hardmetal, ceramic or other cutting materials to be mounted by clamping and to be used for internal turning operations.
Porte-plaquette de tournage intérieur à queue cylindrique pour plaquettes amovibles — Partie 6: Forme Q
L'ISO 5609 spécifie les caractéristiques des porte-plaquette de tournage intérieur à queue cylindrique, de forme Q, c'est-à-dire à queue dégagée et d'angle de direction d'arête égal à 107,5°. Ces porte-plaquette sont principalement prévus pour les plaquettes amovibles en matériaux durs, céramiques ou autres matériaux de coupe montées par serrage et utilisées pour des opérations de tournage intérieur.
General Information
Relations
Overview
ISO 5609-6:2012 defines the characteristics of tool holders for internal turning with cylindrical shank - Style Q. Style Q tool holders feature a reduced shank and a cutting edge angle κ = 107.5° and are primarily intended for indexable inserts (hardmetal/carbide, ceramic or other cutting materials) mounted by clamping for internal turning operations. The standard covers dimensions, designation, materials, design options and marking to ensure interchangeability and clear specification.
Key Topics
- Dimensions and geometry
- Preferred dimensions and symbols are aligned with ISO 5609‑1 and ISO 13399.
- Tabulated sizes (Tables 1–3) give values for shank diameter, overall length, cutting-edge length, minimum working lengths f and l, and insert thickness s.
- Cutting edge and insert data
- Style Q is for rhombic indexable inserts (shapes D and V) with specified cutting-edge lengths and corner radii.
- Nominal corner radii references: ~0.4 mm and ~0.8 mm (converted imperial values 0.397 mm and 0.794 mm); other radii determined per ISO 5609‑1.
- Materials
- Acceptable materials include high‑strength steel (≥ 1 000 N/mm² tensile), brazed hardmetal heads, or heavy metal tools; final choice left to manufacturer.
- Design and mounting
- Options with/without lubrication holes and antivibration devices.
- Standard mounting types follow the tables; alternative mountings possible by agreement.
- Designation and marking
- Formal designation includes reference to ISO 5609‑6 plus symbols for diameter, length, insert shape, style (Q), clearance, hand (R/L), and cutting edge length (examples given in the standard).
- Delivered complete with clamping device but without indexable inserts.
- Marking must include letter symbol and manufacturer name; packaging should reference ISO 5609‑6.
Applications
- Ensures consistent specification and interchangeability of internal turning tool holders used in:
- CNC lathes and boring machines for internal bore finishing and roughing.
- Tooling design, inventory management and purchasing of indexable insert systems.
- CAD/CAM tool libraries and tooling data exchange where ISO 13399 naming conventions apply.
- Useful for tooling manufacturers, machine shops, production engineers, procurement teams and standards/quality engineers specifying or validating tooling.
Who should use this standard
- Tool designers and manufacturers producing cylindrical-shank internal turning holders.
- Shop floor engineers and machinists selecting compatible holders and inserts.
- Purchasing and quality departments that require unambiguous tool designation and conformity.
Related standards
- ISO 5609-1 (designation, styles, dimensions and corrections)
- ISO 5609 (Parts 1–5 covering other styles)
- ISO 1832 (indexable insert designation)
- ISO 13399 (cutting tool data representation and exchange)
Keywords: ISO 5609-6, tool holders for internal turning, style Q, indexable inserts, cylindrical shank, cutting edge angle 107.5°, internal turning tool holders, tool designation, tooling standards.
Frequently Asked Questions
ISO 5609-6:2012 is a standard published by the International Organization for Standardization (ISO). Its full title is "Tool holders for internal turning with cylindrical shank for indexable inserts - Part 6: Style Q". This standard covers: ISO 5609 6:2012 specifies the characteristics of tool holders for internal turning with cylindrical shank, style Q, i.e. with reduced shank and cutting edge angle equal to 107,5°. These tool holders are primarily intended for indexable inserts made of hardmetal, ceramic or other cutting materials to be mounted by clamping and to be used for internal turning operations.
ISO 5609 6:2012 specifies the characteristics of tool holders for internal turning with cylindrical shank, style Q, i.e. with reduced shank and cutting edge angle equal to 107,5°. These tool holders are primarily intended for indexable inserts made of hardmetal, ceramic or other cutting materials to be mounted by clamping and to be used for internal turning operations.
ISO 5609-6:2012 is classified under the following ICS (International Classification for Standards) categories: 25.100.10 - Turning tools. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 5609-6:2012 has the following relationships with other standards: It is inter standard links to ISO 6261:2011, ISO 5609:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase ISO 5609-6:2012 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of ISO standards.
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 5609-6
First edition
2012-12-15
Tool holders for internal turning
with cylindrical shank for indexable
inserts —
Part 6:
Style Q
Porte-plaquette de tournage intérieur à queue cylindrique pour
plaquettes amovibles —
Partie 6: Forme Q
Reference number
©
ISO 2012
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the
address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Dimensions . 1
3.1 General . 1
3.2 Tool holder, style Q, for rhombic indexable insert, shape D . 2
3.3 Tool holder, style Q, for rhombic indexable insert, shape V . 3
4 Designation . 4
5 Material . 4
6 Design . 5
6.1 Type of tool . 5
6.2 Type of mounting . 5
6.3 Corner radius r .
ε 5
6.4 Thickness, s, of insert. 6
7 Extent of delivery . 6
8 Marking . 6
Bibliography . 7
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 5609-6 was prepared by Technical Committee ISO/TC 29, Small tools, Subcommittee SC 9, Tools with
cutting edges made of hard cutting materials.
This first edition of ISO 5609-6, together with ISO 5609-1, ISO 5609-2, ISO 5609-3, ISO 5609-4 and
ISO 5609-5, cancels and replaces ISO 5609:1998, which has been technically revised.
ISO 5609 consists of the following parts, under the general title Tool holders for internal turning with
cylindrical shank for indexable inserts:
Part 1: Designation, styles, dimensions and calculation for corrections
Part 2: Style F
Part 3: Style K
Part 4: Style L
Part 5: Style U
Part 6: Style Q
iv © ISO 2012 – All rights reserved
INTERNATIONAL STANDARD ISO 5609-6:2012(E)
Tool holders for internal turning with cylindrical shank for
indexable inserts —
Part 6:
Style Q
1 Scope
This part of ISO 5609 specifies the characteristics of tool holders for internal turning with cylindrical
shank, style Q, i.e. with reduced shank and cutting edge angle κ = 107,5°.
r
These tool holders are primarily intended for indexable inserts made of hardmetal, ceramic or other
cutting materials to be mounted by clamping and to be used for internal turning operations.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 5609-1, Tool holders for internal turning with cylindrical sha
...
NORME ISO
INTERNATIONALE 5609-6
Première édition
2012-12-15
Porte-plaquette de tournage
intérieur à queue cylindrique pour
plaquettes amovibles —
Partie 6:
Forme Q
Tool holders for internal turning with cylindrical shank for
indexable inserts —
Part 6: Style Q
Numéro de référence
©
ISO 2012
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2012
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Version française parue en 2013
Publié en Suisse
ii © ISO 2012 – Tous droits réservés
Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Dimensions . 1
3.1 Dimensions générales . 1
3.2 Porte-plaquette de forme Q pour plaquette amovible rhombique de forme D . 2
3.3 Porte-plaquette de forme Q pour plaquette amovible rhombique de forme V . 3
4 Désignation . 5
5 Matériau . 5
6 Conception . 5
6.1 Type d’outil . 5
6.2 Type de montage . 5
6.3 Rayon de pointe, r . 6
ε
6.4 Épaisseur, s, de la plaquette . 6
7 Livraison. 6
8 Marquage . 6
Bibliographie . 7
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (CEI) en ce qui concerne
la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives
ISO/CEI, Partie 2.
La tâche principale des comités techniques est d’élaborer les Normes internationales. Les projets de
Normes internationales adoptés par les comités techniques sont soumis aux comités membres pour vote.
Leur publication comme Normes internationales requiert l’approbation de 75 % au moins des comités
membres votants.
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable de
ne pas avoir identifié de tels droits de propriété et averti de leur existence.
L’ISO 5609-6 a été élaborée par le comité technique ISO/TC 29, Petit outillage, sous-comité SC 9, Outils
coupants à arête en matériaux durs de coupe.
Cette première édition de l’ISO 5609-6, conjointement avec l’ISO 5609-1, l’ISO 5609-2, l’ISO 5609-3,
l’ISO 5609-4 et l’ISO 5609-5, annule et remplace l’ISO 5609:1998, qui a fait l’objet d’une révision technique.
L’ISO 5609 comprend les parties suivantes, présentées sous le titre général Porte-plaquette de tournage
intérieur à queue cylindrique pour plaquettes amovibles:
— Partie 1: Désignation, formes, dimensions, et calcul de corrections
— Partie 2: Forme F
— Partie 3: Forme K
— Partie 4: Forme L
— Partie 5: Forme U
— Partie 6: Forme Q
iv © ISO 2012 – Tous droits réservés
NORME INTERNATIONALE ISO 5609-6:2012(F)
Porte-plaquette de tournage intérieur à queue cylindrique
pour plaquettes amovibles —
Partie 6:
Forme Q
1 Domaine d’application
La présente partie de l’ISO 5609 spécifie les caractéristiques des porte-plaquette de tournage intérieur
à queue cylindrique, de forme Q, c’est-à-dire à queue dégagée et d’angle de direction d’arête κ = 107,5°.
r
Ces porte-plaquette sont principalement prévus pour les plaquettes amovibles en matériaux durs,
céramiques ou autres matériaux de coupe montées par serrage et utilisées pour des opérations de
tournage intérieur.
2 Références normatives
Les documents suivants, en totalité ou en partie, sont référencés de manière normative dans le présent
document et sont indispensables pour son application. Pour les références datées, seule l’édition citée
s’applique. Pour les références non datées, la dernière édition du document de référence s’applique (y
compris les éventuels amendements).
ISO 5609-1, Porte-plaquette de tournage intérieur à queue cylindrique pour plaquettes amovibles —
Partie 1: Désignation, formes, dimensions et calcul de corrections
3 Dimensions
3.1 Dimensions générales
Les symboles de dimensions présentés dans les figures/illustrations des tableaux de la présente partie
de l’ISO
...
ISO 5609-6:2012 is a standard that defines the features of tool holders used for internal turning with a cylindrical shank, specifically style Q. These tool holders have a reduced shank and a cutting edge angle of 107.5°. They are designed for indexable inserts made of materials such as hardmetal or ceramic, which can be clamped onto the tool holders for use in internal turning operations.
記事タイトル：ISO 5609-6:2012 - インデックス可能な挿入具による円筒シャンク内部旋削用ツールホルダー - 第6部：スタイルQ 記事内容：ISO 5609-6：2012は、円筒シャンクを持つスタイルQのインデックス可能な挿入具による内部旋削用ツールホルダーの特性を規定しています。これらのツールホルダーは、主にハードメタル、セラミック、または他の切削材料で作られたインデックス可能な挿入具をクランピングして内部旋削作業に使用するために設計されています。
기사 제목: ISO 5609-6:2012 - 색인 가능한 삽입체용 원통 샤크 내부 터닝용 공구 홀더 - 제 6부: 스타일 Q 기사 내용: ISO 5609-6:2012는 원통 샤크와 스타일 Q를 가진 색인 가능한 삽입체용 내부 터닝용 공구 홀더의 특성을 규정한다. 이러한 공구 홀더는 주로 하드메탈, 세라믹 또는 기타 절삭 재료로 제작된 색인 가능한 삽입체를 클램핑하여 내부 터닝 작업에 사용된다.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...