Abstract

This document specifies two methods for the determination of the density of glass fibre: Method A: Gas pycnometer method; Method B: Liquid pycnometer method.

Status
Published
Publication Date
12-Nov-2026
Current Stage
6060 - International Standard published
Start Date
13-Nov-2026
Completion Date
13-Nov-2026

Buy Documents

Standard

ISO 25188:2026 - Glass fibre — Determination of density

Release Date:13-Nov-2026
English language (5 pages)
sale 15% off
Preview
sale 15% off
Preview

ISO 25188:2026, published by ISO, specifies two laboratory methods for determining the density of glass fibre. It is written for glass fibre producers and users who need a consistent density value for material characterization, composite property calculation, and quality control.

What does ISO 25188:2026 specify?

ISO 25188:2026 specifies how to determine the density of glass fibre using either a gas pycnometer method or a liquid pycnometer method. The methods are applicable to glass fibre powder, chopped fibre, yarn and roving, so the same standard can be used across common fibre forms.

The document is organized into scope, normative references, terms and definitions, conditioning and test conditions, the two test methods, and the test report. That structure matters in practice because it shows the full path from specimen preparation to the information that must be reported.

What are the key requirements of ISO 25188:2026?

ISO 25188:2026 requires test specimens to be conditioned in a standard atmosphere in accordance with ISO 291, and testing to be carried out under the same conditions used for conditioning. The preferred atmosphere is 23 °C and 50 % relative humidity. This limits moisture-related variation, which is important because density results can shift if the fibre and apparatus are not at the same condition.

Method A - gas pycnometer method

ISO 25188:2026 bases Method A on Boyle's law and the change in pressure of a confined gas. Helium is preferred for higher accuracy, although other non-corrosive, non-adsorbing gases such as nitrogen may be used. In practice, the gas choice affects how well the gas penetrates pores in the specimen.

The gas pycnometer is used with calibration in accordance with ISO 12154:2014, and the sample chamber temperature is controlled. Specimens are taken from desized material unless the supplier and customer agree otherwise, and size removal may be done by calcination in accordance with ISO 1887. For yarn and roving, the standard requires cutting the fibre so it fits the chamber and packing it vertically as fully as possible.

The procedure includes checking for leakage, weighing the empty chamber and the chamber with specimen, purging air from the chambers, and recording pressure readings. The density is calculated from the chamber weights, chamber volumes and pressure values. The method is repeated until five consecutive single values have a standard deviation below 0,000 5 g/cm3, then the mean is rounded to the nearest 0,001 g/cm3. In practice, this is the repeatability control that tells the user when the measurement has stabilized.

Method B - liquid pycnometer method

ISO 25188:2026 bases Method B on Archimedes' law and uses displacement in water. The specimen is prepared by removing size, grinding it to short pieces, washing it, treating it with anhydrous ethanol, then drying and cooling it before measurement. This preparation is important because it helps remove surface treatments and trapped air that would distort the volume result.

The method uses a 50 mL pycnometer, distilled water in accordance with ISO 3696, and temperature control at 23 °C. Air bubbles are removed with an ultrasonic device or by heating, and the pycnometer is brought to constant volume before weighing. Density is then calculated from the pycnometer masses and the density of distilled water at the measured temperature.

What terms does ISO 25188:2026 define?

  • Density - mass per unit volume of a substance at a specified temperature, expressed in g/cm3 or kg/m3.
  • Gas pycnometer - an instrument that determines specimen volume from pressure changes in a confined gas.
  • Liquid pycnometer - a pycnometer used with liquid displacement to determine specimen volume.
  • Desized - a fibre condition where the size has been removed before testing.
  • Specimen - the fibre portion prepared and measured for the density test.
  • Standard test atmosphere - the conditioning atmosphere used before and during testing, as required by ISO 291.

Who uses ISO 25188:2026?

ISO 25188:2026 is used by glass fibre manufacturers, composite material laboratories, and users who need density data for incoming inspection, product characterization, and composite calculations. The introduction links density to strength and modulus characterization, fibre volume content calculations, and structural design of composites. That makes the standard relevant for production control, R&D, and test laboratories.

Which standards are used with ISO 25188:2026?

  • ISO 291 - provides the standard atmosphere for conditioning and testing.
  • ISO 1887 - gives the calcination method used to remove size from fibre specimens.
  • ISO 3696 - specifies the distilled water used in Method B.
  • ISO 12154:2014 - supplies the gas pycnometer reference and calibration basis used in Method A.

What does the ISO 25188:2026 document contain?

ISO 25188:2026 contains two complete test methods, each with its own principle, apparatus, specimen preparation, and procedure. It also includes the calculation formulas for both methods and the reporting items that must accompany the result.

The document gives the control points that matter in testing: conditioning atmosphere, temperature control, weighing precision, gas purity for Method A, and bubble removal and constant volume for Method B. It also states what to record in the test report, including the method used, whether the fibre was size-free, the number of specimens, the mean density value, and any unusual operation or incident that could affect results.

Buy Documents

Standard

ISO 25188:2026 - Glass fibre — Determination of density

Release Date:13-Nov-2026
English language (5 pages)
sale 15% off
Preview
sale 15% off
Preview

Get Certified

Connect with accredited certification bodies for this standard

Control Union Certifications

Global certification for agriculture and sustainability.

RVA Netherlands Verified

Hohenstein Institut

Textile testing and certification.

DAKKS Germany Verified

Bureau Veritas Bangladesh

Bureau Veritas certification services in Bangladesh.

BAB Bangladesh Verified

Sponsored listings

Frequently Asked Questions

ISO 25188:2026 is a standard published by the International Organization for Standardization (ISO). Its full title is "Glass fibre — Determination of density". This standard covers: This document specifies two methods for the determination of the density of glass fibre: Method A: Gas pycnometer method; Method B: Liquid pycnometer method.

This document specifies two methods for the determination of the density of glass fibre: Method A: Gas pycnometer method; Method B: Liquid pycnometer method.

ISO 25188:2026 is classified under the following ICS (International Classification for Standards) categories: 59.100.10 - Textile glass materials. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 25188:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


International
Standard
ISO 25188
First edition
Glass fibre — Determination of
2026-11
density
Fibre de verre — Détermination de la masse volumique
Reference number
© ISO 2026
All rights reserved.
This ISO publication is protected by copyright and is owned by ISO and/or its licensors.
The content of this ISO publication is provided under licence, not sold. Use is subject to the applicable licence terms issued by ISO,
an ISO member body, or an authorized third-party distributor.
Except as required for implementation or expressly permitted by a separate licence, no part of this ISO publication may be
reproduced, distributed, modified, used, or made available in any form or by any means – electronic or mechanical, including
photocopying, scanning, recording, or posting on internal or external digital platforms.
Any use beyond the scope of the granted rights is prohibited and may result in legal action.
ISO copyright office
CP 401 • CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Conditioning and test conditions . 1
5 Test methods . 2
5.1 Method A: Gas pycnometer method .2
5.1.1 Principle .2
5.1.2 Apparatus and materials .2
5.1.3 Test specimens .2
5.1.4 Procedure .2
5.2 Method B: Liquid pycnometer method .3
5.2.1 Principle .3
5.2.2 Apparatus and materials .3
5.2.3 Test specimens .4
5.2.4 Procedure .4
6 Test report . 4

iii
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 13, Composites
and reinforcement fibres.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
Introduction
The density of glass fibres is an important parameter for determining the physical properties of glass fibres
and for calculating the mechanical properties of glass fibre composites. Determination of the density of glass
fibres affects the characterization of the strength and modulus of glass fibres and composites, the testing
and calculation of the volume content of fibres in composites, and the structural design of composites.
Glass fibre manufacturers can measure the density of glass before it is made into fibre. In addition, glass
fibre users can measure the density of glass fibre according to ISO 12154. However, since ISO 12154 gives a
general method for measuring the skeleton density of a solid material samples and is not optimized for glass
fibre including pre-treatment, a density measurement standard for glass fibre should be established.
The two test methods given in this document are applicable to the glass fibre powder, chopped fibre, yarn
and roving.
v
International Standard ISO 25188:2026(en)
Glass fibre — Determination of density
1 Scope
This document specifies two methods for the determination of the density of glass fibre:
— Method A: Gas pycnometer method;
— Method B: Liquid pycnometer method.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
ISO 291, Plastics — Standard atmospheres for conditioning and testing
ISO 1887, Textile glass — Determination of combustible-matter content
ISO 3696, Water f
...