ISO 24163-1:2024

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 24163-1
ISO/TC 31/SC 9
Clamp-in tyre valves for tyre pressure
Secretariat: AFNOR
monitoring systems —
Voting begins on:
2023-12-21
Part 1:
Voting terminates on:
Definition, types, dimensions and
2024-02-15
valve interface
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 24163-1:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 1 ----------------------
ISO/FDIS 24163-1:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 24163-1
ISO/TC 31/SC 9
Clamp-in tyre valves for tyre pressure
Secretariat: AFNOR
monitoring systems —
Voting begins on:
Part 1:
Voting terminates on:
Definition, types, dimensions and
valve interface
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: +41 22 749 01 11
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: copyright@iso.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 24163-1:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 2 ----------------------
ISO/FDIS 24163-1:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Valve body dimensions . 2
5 Sealing types . 3
6 Valve core . 5
7 Cap . 6
8 Nut . 7
9 Washer for nut . 8
10 Retainer washer for sealing element . 9
11 Marking .
...

ISO/TC 31/SC 9
Date: 2023-02-14
ISO/DISFDIS 24163-1:2022(E)
ISO/TC 31/SC 9
Secretariat: AFNOR
Date: 2023-12-06
Clamp-in tyre valves for tyre pressure monitoring system —
systems —
Part 1:
Definition, types, dimensions and valve interface
FDIS stage

---------------------- Page: 1 ----------------------
ISO/DISFDIS 24163-1:20222023(E)
© ISO 2022, Published in Switzerland2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel.Phone: + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ii © ISO 2022 – All rights reserved
 © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/DISFDIS 24163-1:20222023(E)
Contents
Foreword . iv
Part 1: Definition, types, dimensions and valve interface . 1
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Valve body dimensions . 2
5 Sealing types . 4
6 Valve core . 7
7 Cap . 8
8 Nut . 10
9 Washer for nut . 12
10 Retainer washer for sealing element . 13
11 Marking . 14
12 Rim interface . 14
13 Installation procedure . 16
14 Pressure rate . 16
Bibliography . 17

© ISO 2023 – All rights reserved iii
© ISO 2022 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/DISFDIS 24163-1:20222023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and no
...