ISO/IEC TS 22237-2:2018
(Main)Information technology — Data centre facilities and infrastructures — Part 2: Building construction
Information technology — Data centre facilities and infrastructures — Part 2: Building construction
ISO/IEC TS 22237-2:2018 addresses the construction of buildings and other structures which provide accommodation for data centres based upon the criteria and classification for "physical security" within ISO/IEC TS 22237‑1 in support of availability. ISO/IEC TS 22237-2:2018 specifies requirements and recommendations for the following: a) location and site selection; b) building construction; c) building configuration; d) fire protection; e) quality construction measures. Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this document and are covered by other standards and regulations. However, information given in this document may be of assistance in meeting these standards and regulations. Conformance of data centres to the present document is covered in Clause 4.
Technologie de l’information — Installation et infrastructures de centres de traitement de données — Partie 2: Construction des bâtiments
General Information
Relations
Standards Content (Sample)
TECHNICAL ISO/IEC TS
SPECIFICATION 22237-2
First edition
2018-05
Information technology — Data centre
facilities and infrastructures —
Part 2:
Building construction
Technologie de l’information — Installation et infrastructures de
centres de traitement de données —
Partie 2: Construction des bâtiments
Reference number
ISO/IEC TS 22237-2:2018(E)
©
ISO/IEC 2018
---------------------- Page: 1 ----------------------
ISO/IEC TS 22237-2:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2018 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC TS 22237-2:2018(E)
Contents Page
Foreword .vi
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 2
3.1 Terms and definitions . 2
3.2 Abbreviated terms . 3
4 Conformance . 3
5 Location . 3
5.1 Assessment of location. 3
5.1.1 Requirements . 3
5.1.2 Recommendations . 4
5.2 Geographical location . . 4
5.2.1 Requirements . 4
5.2.2 Recommendations . 4
5.3 Natural environment . 4
5.3.1 Requirements . 4
5.3.2 Recommendations . 4
5.4 Adjacencies .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.