IEC 60470:1999
(Main)High-voltage alternating current contactors and contactor-based motor-starters
High-voltage alternating current contactors and contactor-based motor-starters
Applicable to a.c. contactors and/or contactor-based motor-starters designed for indoor installation and operation at frequencies up to and including 60 Hz on systems having voltages above 1 000 V but not exceeding 12 000 V. Applicable only to three-pole contactors and starters for use in three-phase systems and single-pole contactors and starters for use in single-phase systems.
Contacteurs pour courant alternatif haute tension et démarreurs de moteurs à contacteurs
General Information
Relations
Buy Standard
Standards Content (Sample)
INTERNATIONAL IEC
STANDARD
Second edition
1999-10
High-voltage alternating current contactors
and contactor-based motor-starters
Contacteurs pour courants alternatifs haute tension
et démarreurs de moteurs à contacteurs
Reference number
Numbering
As from 1 January 1997 all IEC publications are issued with a designation in the
60000 series.
Consolidated publications
Consolidated versions of some IEC publications including amendments are
available. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the
base publication, the base publication incorporating amendment 1 and the base
publication incorporating amendments 1 and 2.
Validity of this publication
The technical content of IEC publications is kept under constant review by the IEC,
thus ensuring that the content reflects current technology.
Information relating to the date of the reconfirmation of the publication is available
in the IEC catalogue.
Information on the subjects under consideration and work in progress undertaken
by the technical committee which has prepared this publication, as well as the list
of publications issued, is to be found at the following IEC sources:
• IEC web site*
•
Catalogue of IEC publications
Published yearly with regular updates
(On-line catalogue)*
• IEC Bulletin
Available both at the IEC web site* and as a printed periodical
Terminology, graphical and letter symbols
For general terminology, readers are referred to IEC 60050: International
Electrotechnical Vocabulary (IEV).
For graphical symbols, and letter symbols and signs approved by the IEC for
general use, readers are referred to publications IEC 60027: Letter symbols to be
used in electrical technology, IEC 60417: Graphical symbols for use on equipment.
Index, survey and compilation of the single sheets and IEC 60617: Graphical symbols
for diagrams.
* See web site address on title page.
INTERNATIONAL IEC
STANDARD
Second edition
1999-10
High-voltage alternating current contactors
and contactor-based motor-starters
Contacteurs pour courants alternatifs haute tension
et démarreurs de moteurs à contacteurs
IEC 1999 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http://www.iec.ch
Commission Electrotechnique Internationale
PRICE CODE
XC
International Electrotechnical Commission
For price, see current catalogue
– 2 – 60470 © IEC:1999(E)
CONTENTS
Page
FOREWORD . 5
Clause
1 General. 7
1.1 Scope and object . 7
1.2 Normative references. 9
2 Normal service conditions . 10
2.1 Special service conditions . 10
3 Definitions. 10
3.1 General terms . 10
3.2 Assemblies of switchgear and controlgear . 11
3.3 Parts of assemblies. 11
3.4 Switching devices. 11
3.5 Parts of switchgear and controlgear. 13
3.6 Operation. 14
3.7 Characteristic quantities. 16
4 Ratings . 20
4.1 Rated voltage (U ) . 22
r
4.2 Rated insulation level . 22
4.3 Rated frequency (f ) . 23
r
4.4 Rated normal current and temperature rise. 23
4.5 Rated short-time withstand current (I ) . 24
k
4.6 Rated peak withstand current (I ) . 24
p
4.7 Rated duration of short circuit (t ). 24
k
4.8 Rated supply voltage of closing and opening devices, and of auxiliary and
control circuits (U ) . 24
a
4.9 Rated supply frequency of closing and opening devices, and of auxiliary circuits. 24
4.10 Rated pressure of compressed gas supply for insulation and/or operation. 24
5 Design and construction . 33
5.1 Requirements for liquids. 33
5.2 Requirements for gases . 33
5.3 Earthing . 33
5.4 Auxiliary and control equipment. 34
5.5 Dependent power operation. 34
5.6 Stored energy operation . 34
5.7 Independent manual operation . 34
5.8 Operation of releases. 34
5.9 Low- and high-pressure interlocking and monitoring devices. 34
5.10 Nameplates. 34
5.11 Interlocking devices . 35
5.12 Position indication . 35
5.13 Degrees of protection by enclosures. 35
5.14 Creepage distances . 35
60470 © IEC:1999(E) – 3 –
Clause Page
5.15 Gas and vacuum tightness . 35
5.16 Liquid tightness. 36
5.17 Flammability. 36
5.18 Electromagnetic compatibility (EMC) . 36
6 Type tests . 41
6.1 General. 41
6.2 Dielectric tests . 43
6.3 Radio interference voltage (r.i.v.) test. 43
6.4 Measurement of the resistance of circuits. 43
6.5 Temperature-rise tests . 43
6.6 Short-time withstand current and peak withstand current tests . 47
6.7 Verification of the protection. 47
6.8 Tightness tests. 47
6.9 Electromagnetic compatibility tests (EMC) . 47
7 Routine tests.59
7.1 Dielectric test on the main circuit. 59
7.2 Dielectric test on auxiliary and control circuits. 59
7.3 Measurement of the resistance of the main circuit . 59
7.4 Tightness test . 59
7.5 Design and visual checks . 60
8 Guide to the selection of contactors and motor-starters for service . 61
9 Information to be given with enquiries, tenders and orders. 65
10 Rules for transport, storage, erection, operation and maintenance . 66
11 Safety . 66
Annex A (normative) Records and reports of type tests for making, breaking
and short-time current performance . 75
Figure 1 – Examples of speed/time curves . 67
Figure 2 – Test duties A and B – preferred earth point . 68
Figure 3 – Test duties A and B – alternative earth point. 69
Figure 4 – Test duty C – preferred earth point . 70
Figure 5 – Test duty C – alternative earth point . 71
Figure 6 – Representation by two parameters of a prospective TRV of a circuit . 71
Figure 7 – Representation by four parameters of a prospective TRV of a circuit. 72
Figure 8 – Representation of the specified TRV by a two-parameter reference line
and a delay line . 72
Figure 9 – Determination of power frequency recovery voltage . 73
Figure 10 – Characteristics for determining take-over current. 74
– 4 – 60470 © IEC:1999(E)
Page
Table 1 – Ratings and characteristics – Rating/characteristic . 21
Table 2 – Utilization categories . 28
Table 3 – Characteristics dependent on starter type. 33
Table 4 – Characteristics of the opening operation of overload relays when energized
on all poles. 39
Table 5 – Characteristics of the opening operation of three-pole thermal overload relays
when energized on two poles only. 39
Table 6 – Characteristics of the opening by three-pole phase failure-sensitive thermal
overload relays when their poles are not equally energized. 40
Table 7 – Applicable type tests . 42
Table 8 – Test copper conductors for test currents up to 800 A inclusive. 44
Table 9 – Intermittent duty operating cycles . 45
Table 10 – Verification of rated making and breaking capacities – Conditions for making
and breaking corresponding to the several utilization categories at rated voltage U . 49
r
Table 11 – Relationship between current broken I and OFF time. 52
c
Table 12 – Overload current withstand requirements. 53
Table 13 – Transient recovery voltage characteristics . 58
Table 14 – Verification of the number of on-load operating cycles – Conditions for
making and breaking corresponding to the several utilization categories. 59
60470 © IEC:1999(E) – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HIGH-VOLTAGE ALTERNATING CURRENT CONTACTORS
AND CONTACTOR-BASED MOTOR-STARTERS
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Sta
...
IEC 60470
Edition 2.0 1999-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
High-voltage alternating current contactors and contactor-based motor-starters
Contacteurs pour courant alternatif haute tension et démarreurs de moteurs à
contacteurs
Copyright © 1999 IEC, Geneva, Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60470
Edition 2.0 1999-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
High-voltage alternating current contactors and contactor-based motor-starters
Contacteurs pour courant alternatif haute tension et démarreurs de moteurs à
contacteurs
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
XC
CODE PRIX
ICS 29.130.10 ISBN 2-8318-5285-4
– 2 – 60470 © CEI:2000
SOMMAIRE
Pages
AVANT-PROPOS . 8
Articles
1 Généralités .12
1.1 Domaine d'application et objet. 12
1.2 Références normatives . 16
2 Conditions normales et conditions spéciales de service . 18
2.1 Conditions normales de service. 18
2.2 Conditions spéciales de service. 18
3 Définitions. 18
3.1 Termes généraux . 18
3.2 Ensembles d’appareillage. 20
3.3 Parties d'ensembles . 20
3.4 Appareils de connexion . 20
3.5 Eléments des appareillages. 24
3.6 Fonctionnement . 26
3.7 Grandeurs caractéristiques . 30
4 Caractéristiques assignées. 38
4.1 Tension assignée (U ) . 42
r
4.2 Niveau d'isolement assigné . 42
4.3 Fréquence assignée (f ) . 44
r
4.4 Courant assigné en service continu et échauffement . 44
4.5 Courant de courte durée admissible assigné (I ). 46
k
4.6 Valeur de crête du courant admissible assigné (I ) . 46
p
4.7 Durée de court-circuit assignée (t ) . 46
k
4.8 Tension d’alimentation assignée des dispositifs de fermeture et d’ouverture,
et des circuits auxiliaires et de commande (U ) . 46
a
4.9 Fréquence d’alimentation assignée des dispositifs de fermeture et d’ouverture
et des circuits auxiliaires . 46
4.10 Pression assignée d’alimentation en gaz comprimé pour l’isolement
et/ou la manœuvre . 48
5 Conception et construction . 64
5.1 Prescriptions pour les liquides. 64
5.2 Prescriptions pour les gaz . 64
5.3 Mise à la terre. 64
5.4 Equipements auxiliaires et de commande . 66
5.5 Manœuvre à source d’énergie extérieure. 66
5.6 Manœuvre à accumulation d’énergie . 66
5.7 Manœuvre manuelle indépendante . 66
5.8 Fonctionnement des déclencheurs . 66
5.9 Dispositifs de verrouillage et de surveillance basse et haute pression . 66
5.10 Plaques signalétiques . 66
5.11 Verrouillages. 68
5.12 Indicateur de position . 68
60470 © IEC:2000 – 3 –
CONTENTS
Page
FOREWORD . 9
Clause
1 General. 13
1.1 Scope and object . 13
1.2 Normative references. 17
2 Normal and special service conditions . 19
2.1 Normal service conditions . 19
2.2 Special service conditions . 19
3 Definitions. 19
3.1 General terms . 19
3.2 Assemblies of switchgear and controlgear . 21
3.3 Parts of assemblies. 21
3.4 Switching devices. 21
3.5 Parts of switchgear and controlgear. 25
3.6 Operation. 27
3.7 Characteristic quantities. 31
4 Ratings . 39
U ) . 43
4.1 Rated voltage (
r
4.2 Rated insulation level . 43
4.3 Rated frequency (f ) . 45
r
4.4 Rated normal current and temperature rise. 45
4.5 Rated short-time withstand current (I ) . 47
k
4.6 Rated peak withstand current (I ) . 47
p
4.7 Rated duration of short circuit (t ). 47
k
4.8 Rated supply voltage of closing and opening devices, and of auxiliary
and control circuits (U ). 47
a
4.9 Rated supply frequency of closing and opening devices, and of auxiliary circuits. 47
4.10 Rated pressure of compressed gas supply for insulation and/or operation. 49
5 Design and construction . 65
5.1 Requirements for liquids. 65
5.2 Requirements for gases . 65
5.3 Earthing . 65
5.4 Auxiliary and control equipment. 67
5.5 Dependent power operation. 67
5.6 Stored energy operation . 67
5.7 Independent manual operation . 67
5.8 Operation of releases. 67
5.9 Low- and high-pressure interlocking and monitoring devices. 67
5.10 Nameplates. 67
5.11 Interlocking devices .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.