Radio interference test on high-voltage insulators

IEC 60437:2023 specifies the procedure for a radio interference (RI) test carried out in a laboratory on clean and dry insulators at a frequency of 0,5 MHz or 1 MHz or, alternatively, at other frequencies between 0,5 MHz and 2 MHz.
This document applies to insulators for use on AC or DC overhead power lines and overhead traction lines with a nominal voltage greater than 1 000 V.
This third edition cancels and replaces the second edition published in 1997. This third edition cancels and replaces the second edition published in 1997. This edition includes the following significant technical changes with respect to the previous edition:
a) Composite station post and composite hollow core station post insulators have been included;
b) All paragraphs of Samples test were actualized;
c) Sample test fast procedure was introduced.

Essai de perturbations radioélectriques des isolateurs pour haute tension

IEC 60437:2023 spécifie la procédure pour un essai de perturbations radioélectriques effectué en laboratoire sur des isolateurs propres et secs à une fréquence de 0,5 MHz ou 1 MHz ou, en variante, à d'autres fréquences comprises entre 0,5 MHz et 2 MHz. Le présent document s’applique aux isolateurs destinés à des lignes aériennes en courant alternatif ou continu et des lignes aériennes de traction de tension nominale supérieure à 1 000 V.
Cette troisième édition annule et remplace la deuxième édition parue en 1997. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) Introduction des supports isolants composites et des supports isolants composites creux;
b) Actualisation de tous les alinéas portant sur les essais individuels;
c) Introduction d'une procédure rapide d'essai individuel.

General Information

Status
Published
Publication Date
14-Dec-2023
Technical Committee
Drafting Committee
Current Stage
PPUB - Publication issued
Start Date
01-Dec-2023
Completion Date
15-Dec-2023
Ref Project

Relations

Buy Standard

Standard
IEC 60437:2023 CMV - Radio interference test on high-voltage insulators Released:12/15/2023 Isbn:9782832280621
English language
41 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 60437:2023 - Radio interference test on high-voltage insulators Released:12/15/2023 Isbn:9782832277461
English and French language
25 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60437 ®
Edition 3.0 2023-12
COMMENTED VERSION
INTERNATIONAL
STANDARD
colour
inside
Radio interference test on high-voltage insulators
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a
Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 19 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 60437 ®
Edition 3.0 2023-12
COMMENTED VERSION
INTERNATIONAL
STANDARD
colour
inside
Radio interference test on high-voltage insulators
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.080.10 ISBN 978-2-8322-8062-1
– 2 – IEC 60437:2023 CMV © IEC 2023
CONTENTS
FOREWORD .3
INTRODUCTION .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .7
4 Measurement frequency .7
5 Radio noise limits and test voltage.7
6 Measuring instruments .8
6.1 Standard CISPR measuring apparatus .8
6.2 Other measuring apparatus .8
7 Measuring circuit .8
8 Requirements for test voltage .8
9 Atmospheric conditions .8
10 Test area .9
11 Arrangements of insulators for test .9
11.1 Mounting of insulators .9
11.2 Conditions of insulators before test . 10
11.3 Checking and calibration of test circuit . 10
12 Insulators for Type test . 10
12.1 Number of insulators . 10
12.2 String insulator units .
12.2 Voltage application and RI characteristics . 12
12.3 Acceptance criterion . 12
13 Procedure for type tests .
13 Procedure for Sample tests . 12
13.1 General . 12
13.2 Insulators subjected to sample tests . 12
13.3 Number of samples . 13
14.3 Mounting arrangement .
13.4 Test procedure . 13
13.5 Acceptance criterion . 13
13.6 Re-test procedure . 13
14 Test report . 14
List of comments . 15

Figure 1 – Schematic representation of the type test procedure: (a) measurement cycle /
(b) example of characteristic curve . 14

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO INTERFERENCE TEST ON HIGH-VOLTAGE INSULATORS

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
This commented version (CMV) of the official standard IEC 60437:2023 edition 3.0 allows
the user to identify the changes made to the previous IEC 60437:1997 edition 2.0.
Furthermore, comments from IEC TC 36 experts are provided to explain the reasons of
the most relevant changes, or to clarify any part of the content.
A vertical bar appears in the margin wherever a change has been made. Additions are in
green text, deletions are in strikethrough red text. Experts' comments are identified by a
blue-background number. Mouse over a number to display a pop-up note with the
comment.
This publication contains the CMV and the official standard. The full list of comments is
available at the end of the CMV.

– 4 – IEC 60437:2023 CMV © IEC 2023
IEC 60437 has been prepared by IEC technical committee 36: Insulators. It is an International
Standard.
This third edition cancels and replaces the second edition published in 1997. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) Composite station post and composite hollow core station post insulators have been
included;
b) All paragraphs of Samples test were actualized;
c) Sample test fast procedure was introduced.
The text of this International Standard is based on the following documents:
Draft Report on voting
36/585/FDIS 36/591/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn, or
• revised.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.

INTRODUCTION
The first edition of IEC 60437 presented the available information on a radio interference test
on high-voltage insulators as a technical report. This allowed further experience in conducting
the test and the interpretation of results to be gained.
The second edition incorporated that experience in the form of an International Standard, which
gave the recommended procedures for a radio interference test on high-voltage insulators.
This third edition incorporates clarification of test arrangements and the number of insulators
to be tested for composite station posts, composite hollow core station posts and hybrid
insulators. This edition also incorporates clarification on the fast method for the sample test.

– 6 – IEC 60437:2023 CMV © IEC 2023
RADIO INTERFERENCE TEST ON HIGH-VOLTAGE INSULATORS

1 Scope
This In
...


IEC 60437 ®
Edition 3.0 2023-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Radio interference test on high-voltage insulators

Essai de perturbations radioélectriques des isolateurs pour haute tension

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC -  IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur les adapté à vos besoins.
projets et les publications remplacées ou retirées.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au monde,
Restez informé sur les nouvelles publications IEC. Just
avec plus de 22 300 articles terminologiques en anglais et en
Published détaille les nouvelles publications parues.
français, ainsi que les termes équivalents dans 19 langues
Disponible en ligne et une fois par mois par email.
additionnelles. Egalement appelé Vocabulaire

Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc

Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 60437 ®
Edition 3.0 2023-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Radio interference test on high-voltage insulators

Essai de perturbations radioélectriques des isolateurs pour haute tension

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.080.10  ISBN 978-2-8322-7746-1

– 2 – IEC 60437:2023 © IEC 2023
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Measurement frequency . 7
5 Radio noise limits and test voltage . 7
6 Measuring instruments . 7
6.1 Standard CISPR measuring apparatus . 7
6.2 Other measuring apparatus . 8
7 Measuring circuit . 8
8 Requirements for test voltage . 8
9 Atmospheric conditions . 8
10 Test area . 9
11 Arrangements of insulators for test . 9
11.1 Mounting of insulators . 9
11.2 Conditions of insulators before test . 10
11.3 Checking and calibration of test circuit . 10
12 Type test . 10
12.1 Number of insulators . 10
12.2 Voltage application and RI characteristics . 11
12.3 Acceptance criterion . 11
13 Sample tests . 11
13.1 General . 11
13.2 Insulators subjected to sample tests . 11
13.3 Number of samples . 12
13.4 Test procedure . 12
13.5 Acceptance criterion . 12
13.6 Re-test procedure . 12
14 Test report . 13

Figure 1 – Schematic representation of the type test procedure: (a) measurement cycle
/ (b) example of characteristic curve . 13

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO INTERFERENCE TEST ON HIGH-VOLTAGE INSULATORS

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
IEC 60437 has been prepared by IEC technical committee 36: Insulators. It is an International
Standard.
This third edition cancels and replaces the second edition published in 1997. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) Composite station post and composite hollow core station post insulators have been
included;
b) All paragraphs of Samples test were actualized;
c) Sample test fast procedure was introduced.

– 4 – IEC 60437:2023 © IEC 2023
The text of this International Standard is based on the following documents:
Draft Report on voting
36/585/FDIS 36/591/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.