IEC 61158-5-24:2023
(Main)Industrial communication networks - Fieldbus specifications - Part 5-24: Application layer service definition - Type 24 elements
Industrial communication networks - Fieldbus specifications - Part 5-24: Application layer service definition - Type 24 elements
IEC 61158-5-24:2023 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 24 fieldbus. The term "time-critical" is used to represent the presence of a time-window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life.
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-24: Définition des services de la couche application - Éléments de type 24
L'IEC 61158-5-24:2023 fournit des éléments communs pour les communications de messagerie prioritaires et non prioritaires élémentaires entre les programmes d’application des environnements d’automatisation et le matériel spécifique au bus de terrain de type 24. Le terme "prioritaire" signale l’existence d’une fenêtre temporelle dans laquelle une ou plusieurs actions spécifiées doivent être réalisées, avec un niveau de certitude défini. Tout manquement à réaliser ces actions dans la fenêtre de temps prévue risque de provoquer la défaillance des applications qui les demandent, avec le risque de mettre en danger l’équipement, l’usine, voire les personnes.
General Information
Relations
Standards Content (Sample)
IEC 61158-5-24 ®
Edition 2.0 2023-03
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 5-24: Application layer service definition – Type 24 elements
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 300 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 19 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 61158-5-24 ®
Edition 2.0 2023-03
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 5-24: Application layer service definition – Type 24 elements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.100.70; 35.110 ISBN 978-2-8322-6580-2
– 2 – IEC 61158-5-24:2023 © IEC 2023
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
1.1 General . 8
1.2 Specifications . 9
1.3 Conformance . 9
2 Normative references . 9
3 Terms, definitions, symbols, abbreviated terms and conventions . 10
3.1 Referenced terms and definitions . 10
3.1.1 ISO/IEC 7498-1 terms . 10
3.1.2 ISO/IEC 9545 terms . 10
3.1.3 ISO/IEC 8824-1 terms . 10
3.1.4 Terms and definitions from ISO/IEC 10731 . 11
3.2 Additional terms and definitions . 11
3.3 Abbreviations and symbols . 16
3.4 Conventions . 17
3.4.1 Overview . 17
3.4.2 Conventions for class definitions . 18
3.4.3 Conventions for service definitions . 19
4 Concepts . 20
5 Data type ASE . 20
6 Communication model specifications . 20
6.1 Type specific concepts . 20
6.2 Overview. 21
6.3 FSM ASE . 23
6.3.1 Concepts . 23
6.3.2 FieldbusSystemManager class specifications . 24
6.4 FAL ASEs . 29
6.4.1 Field Device Control ASE . 29
6.4.2 Message ASE . 58
6.4.3 Event Management ASE . 71
6.5 FAL ARs . 75
6.5.1 AR model. 75
6.5.2 FDC AREP . 78
6.5.3 MSG AREP . 96
Bibliography . 102
Figure 1 – FAL ASE model of Type 24 . 23
Figure 2 – AR model for field device control service . 77
Figure 3 – AR model for message service . 77
Figure 4 – MSG ARs between each APs . 78
Table 1 – AP type definition . 22
Table 2 – Support list of service for each class of FSM ASE . 24
Table 3 – FSM-Reset . 26
Table 4 – FSM-GetStatus. 26
Table 5 – FSM-SetContext . 27
Table 6 – FSM-GetContext . 28
Table 7 – FSM-Start. 29
Table 8 – Support list of service for each class of FDC ASE . 29
Table 9 – FDC-Reset for master class . 33
Table 10 – FDC-Open for master class . 33
Table 11 – FDC-Enable for master class . 34
Table 12 – FDC-Connect for master class . 35
Table 13 – FDC-SyncSet for master class . 36
Table 14 – FDC-Disconnect for master class . 37
Table 15 – FDC-ResumeCycle for master class . 38
Table 16 – FDC-ComCycle for master class . 38
Table 17 – FDC-Command for master class . 39
Table 18 – FDC-DataExchange for master class . 40
Table 19 – FDC-Reset for slave class . 44
Table 20 – FDC-Open for slave class . 44
Table 21 – FDC-Enable for slave class . 45
Table 22 – FDC-Connect for slave class . 46
Table 23 – FDC-SyncSet for slave class . 47
Table 24 – FDC-Disconnect for slave class . 49
Table 25 – FDC-ResumeCycle for slave class . 50
Table 26 – FDC-ComCycle for slave class . 50
Table 27 – FDC-Command for slave class . 51
Table 28 – FDC-Command for slave class . 52
Table 29 – FDC-Reset for monitor class . 54
Table 30 – FDC-Open for monitor class . 55
Table 31 – FDC-Enable for monitor class . 55
Table 32 – FDC-GetCMD for monitor class . 56
Table 33 – FDC-GetRSP for monitor class . 57
Table 34 – Support list of service for each class of Message ASE. 58
Table 35 – MSG-Reset for requester class . 60
Table 36 – MSG-Open for requester class . 61
Table 37 – MSG-Enable for requester class . 61
Table 38 – MSG-UserMessage for requester class. 62
Table 39 – MSG-OnewayMessage for requester class . 64
Table 40 – MSG-AbortTransaction for requester class . 65
Table 41 – MSG-Reset for responder class . 67
Table 42 – MSG-Open for responder class . 68
Table 43 – MSG-Enable for responder class . 68
Table 44 – MSG-UserMessage for responder class . 69
Table 45 – MSG-OnewayMessage for responder class . 70
Table 46 – MSG-AbortTransaction for responder class . 71
– 4 – IEC 61158-5-24:2023 © IEC 2023
Table 47 – Support list of service for each class of Event Management ASE . 72
Table 48 – EVM-Reset . 73
Table 49 – EVM-Enable . 73
Table 50 – EVM-SyncEvent . 74
Table 51 – EVM-ReadNetClock . 74
Table 52 – Support list of service for each class of AR ASE . 75
Table 53 – AR-Reset for FDC Master AR class . 80
Table 54 – AR-Open for FDC Master AR class .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.