IEC TS 63050:2019

IEC TS 63050 ®
Edition 1.0 2019-10
TECHNICAL
SPECIFICATION
colour
inside
Radiation protection instrumentation – Dosemeters for pulsed fields of ionizing
radiation
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.
IEC TS 63050 ®
Edition 1.0 2019-10
TECHNICAL
SPECIFICATION
colour
inside
Radiation protection instrumentation – Dosemeters for pulsed fields of ionizing

radiation
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 13.280 ISBN 978-2-8322-7421-7

– 2 – IEC TS 63050:2019 © IEC 2019
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 8
2 Normative references . 9
3 Terms and definitions, abbreviated terms and symbols, quantities and units . 9
3.1 Terms and definitions . 9
3.2 Abbreviated terms and symbols . 11
3.3 Quantities and units . 12
4 General test procedure . 12
4.1 Nature of test . 12
4.2 Reference conditions and standard test conditions . 12
5 General requirements . 13
5.1 Summary of requirements . 13
5.2 Parameters required to be known of the pulsed radiation field . 13
5.3 Parameters required to be determined of the dosemeter . 13
5.4 Criteria for suitability of a dosemeter in pulsed radiation fields . 13
5.4.1 General . 13
5.4.2 Requirements . 14
5.4.3 Method of test and interpretation of the results . 14
5.5 Mechanical characteristics . 14
5.6 Requirements for the documentation . 14
6 Radiation detection requirements . 14
6.1 General . 14

6.2 Maximum measurable dose rate value, H . 14
meas, max
6.2.1 Requirements . 14
6.2.2 Method of test. 15
6.2.3 Interpretation of the results . 16
6.3 Pulse dose rate overload alarm . 17
6.3.1 General . 17
6.3.2 Requirements . 17
6.3.3 Method of test. 17
6.3.4 Interpretation of the results . 17
6.4 Overload and pulse dose rate overload alarm . 17
6.4.1 Requirements . 17
6.4.2 Method of test. 17
6.4.3 Interpretation of the results . 18
7 Environmental requirements . 18
8 Mechanical requirements . 18
9 Electromagnetic requirements . 18
10 Documentation . 19
10.1 Operation and maintenance manual . 19
10.2 Type test report . 19
Annex A (informative) Parameter values for typical workplaces where pulsed radiation
occurs . 21
Annex B (informative) Typical examples of test results for 6.2.2.1 and 6.2.2.2 . 22

Bibliography . 23

Figure B.1 – Typical test results for an electronic personal dosemeter using radiation
pulses with constant dose rate and various pulse durations, i.e. varying dose
equivalents per radiation pulse . 22
Figure B.2 – Typical test results for three personal dosemeters using radiation pulses
with constant dose of 1 mSv and various pulse durations, i.e. various pulse dose
equivalent rates . 22

Table 1 – Abbreviated terms and symbols . 12
Table 2 – Reference conditions and standard test conditions for tests using pulsed

radiation . 19
Table 3 – Characteristics of dosemeters used in pulsed fields of ionizing radiation . 20
Table A.1 – Parameter values for workplaces where pulsed radiation occurs . 21

– 4 – IEC TS 63050:2019 © IEC 2019
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIATION PROTECTION INSTRUMENTATION – DOSEMETERS
FOR PULSED FIELDS OF IONIZING RADIATION

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. In
exceptional circumstances, a technical committee may propose the publication of a Technical
Specification when
• the required support cannot be obtained for the publication of an International Standard,
despite repeated efforts, or
• the subject is still under technical development or where, for any other reason, there is the
future but no immediate possibility of an agreement on an International Standard.
Technical Specifications are subject to review within three years of publication to decide
whether they can be transformed into International Standards.
IEC 63050, which is a technical specification, has been prepared by subcommittee 45B:
Radiation protection instrumentation, of IEC technical committee 45: Nuclear instrumentation.

The text of this Technical Specification is based on the following documents:
Draft TS Report on voting
45B/903/DTS 45B/925A/RVDTS
Full information on the voting for the approval of this Technical Specification can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this document will rem
...