IEC 62040-3:2011/COR1:2011
(Corrigendum)Corrigendum 1 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
Corrigendum 1 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
Corrigendum 1 - Alimentation sans interruption (ASI) - Partie 3: Méthode de spécification des performances et exigences d'essais
General Information
- Status
- Published
- Publication Date
- 12-Sep-2011
- Technical Committee
- SC 22H - Uninterruptible power systems (UPS)
- Current Stage
- DELPUB - Deleted Publication
- Start Date
- 21-Apr-2021
- Completion Date
- 14-Feb-2026
Relations
- Effective Date
- 05-Sep-2023
- Effective Date
- 05-Sep-2023
Get Certified
Connect with accredited certification bodies for this standard
Intertek Testing Services NA Inc.
Intertek certification services in North America.
UL Solutions
Global safety science company with testing, inspection and certification.
ANCE
Mexican certification and testing association.
Sponsored listings
Frequently Asked Questions
IEC 62040-3:2011/COR1:2011 is a standard published by the International Electrotechnical Commission (IEC). Its full title is "Corrigendum 1 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements". This standard covers: Corrigendum 1 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
Corrigendum 1 - Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
IEC 62040-3:2011/COR1:2011 is classified under the following ICS (International Classification for Standards) categories: 29.200 - Rectifiers. Convertors. Stabilized power supply. The ICS classification helps identify the subject area and facilitates finding related standards.
IEC 62040-3:2011/COR1:2011 has the following relationships with other standards: It is inter standard links to IEC 62040-3:2011, IEC 62040-3:2021. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
IEC 62040-3:2011/COR1:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
IEC 62040-3 CEI 62040-3
nd ème
(2 edition – 2011) (2 édition – 2011)
Uninterruptible power systems (UPS) Alimentation sans interruption (ASI)
Part 3: Method of specifying the performance Partie 3: Méthode de spécification des performances et
and test requirements exigences d’essais
CO RRI G E NDUM 1
Table 3 – UPS test schedule Tableau 3 – Synthèse des essais des ASI
In the table, replace the existing line: Dans le tableau, remplacer la ligne existante:
Test Routine Type test Subclause Description de Essai individuel Essai de Paragraphe
description test l’essai de série type
Frequency
X 6.2.2.6
Variation de X 6.2.2.6
slew-rate
fréquence
By the following:
Par la ligne suivante:
Test description Routine Type test Subclause
Description de Essai individuel Essai de Paragraphe
test
l’essai de série type
Synchronization X 6.2.2.6
Synchronisation X 6.2.2.6
6.2.2.6 Synchronization 6.2.2.6 Synchronisation
Replace the first two paragraphs by the Remplacer les deux premiers alinéas par ce qui
following: suit:
This test shall be performed when Cet essai doit être réalisé lorsque la
synchronization to an external source is synchronisation avec une source extérieure est
required. The test shall be performed in requise. Les essais doivent être réalisés en mode
normal mode and at light load. The voltage normal et à faible charge. Les tensions et
and frequency of the external source, e.g. fréquences de la source externe, c’est-à-dire la
the bypass source shall be that prevailing source du bypass statique, doivent être
at the test site and shall be stable and représentatives des sites de tests et doivent
within the characteristics specified in demeurer stables et dans les caractéristiques
5.2.1. spécifiées dans 5.2.1.
Compliance is verified when, in steady- La conformité est vérifiée lorsque, dans un état
state, the phase angle between the stable, l’angle entre les ondes des phases de
inverter and the external source voltage l’onduleur et de la source externe est inférieur
waveforms is equal or less than that ou égal à ce
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...