Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing

IEC 62660-1:2010 specifies performance and life testing of secondary lithium-ion cells used for propulsion of electric vehicles including battery electric vehicles (BEV) and hybrid electric vehicles (HEV).

Eléments d'accumulateurs lithium-ion pour la propulsion des véhicules routiers électriques - Partie 1: Essais de performance

La CEI 62660-1:2010 spécifie les essais de performance et de durée de vie des accumulateurs lithium-ion utilisés pour la propulsion des véhicules électriques, incluant les véhicules électriques à batterie d'accumulateurs (BEV) et les véhicules électriques hybrides (HEV).

General Information

Status
Published
Publication Date
15-Dec-2010
Current Stage
DELPUB - Deleted Publication
Completion Date
12-Dec-2018
Ref Project

Relations

Buy Standard

Standard
IEC 62660-1:2010 - Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing Released:12/16/2010
English and French language
75 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 62660-1 ®
Edition 1.0 2010-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Secondary lithium-ion cells for the propulsion of electric road vehicles –
Part 1: Performance testing
Éléments d’accumulateurs lithium-ion pour la propulsion des véhicules routiers
électriques –
Partie 1: Essais de performance

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by

any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or

IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,

please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie

et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.

Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette

publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
§ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
§ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
§ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
§ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
§ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
§ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
§ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
§ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 62660-1 ®
Edition 1.0 2010-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Secondary lithium-ion cells for the propulsion of electric road vehicles –
Part 1: Performance testing
Éléments d’accumulateurs lithium-ion pour la propulsion des véhicules routiers
électriques –
Partie 1: Essais de performance

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
W
CODE PRIX
ICS 29.220.20, 43.120 ISBN 978-2-88912-308-7
– 2 – 62660-1 Ó IEC:2010
CONTENTS
FOREWORD . 0H4

INTRODUCTION . 1H6

1 Scope . 2H7

2 Normative references . 3H7

3 Terms and definitions . 4H7

4 Test conditions . 5H8

4.1 General . 6H8

4.2 Measuring instruments. 7H8
4.2.1 Range of measuring devices . 8H8
4.2.2 Voltage measurement . 9H9
4.2.3 Current measurement . 10H9
4.2.4 Temperature measurements . 11H9
4.2.5 Other measurements . 12H9
4.3 Tolerance . 13H10
4.4 Test temperature. 14H10
5 Dimension measurement . 15H10
6 Mass measurement . 16H11
7 Electrical measurement . 17H11
7.1 General charge conditions . 18H11
7.2 Capacity . 19H12
7.3 SOC adjustment . 20H12
7.4 Power . 21H12
7.4.1 Test method . 22H12
7.4.2 Calculation of power density . 23H15
7.4.3 Calculation of regenerative power density . 24H16
7.5 Energy . 25H17
7.5.1 Test method . 26H17
7.5.2 Calculation of energy density. 27H17
7.6 Storage test . 28H18
7.6.1 Charge retention test . 29H18
7.6.2 Storage life test . 30H19
7.7 Cycle life test . 31H19

7.7.1 BEV cycle test . 32H19
7.7.2 HEV cycle test . 33H23
7.8 Energy efficiency test . 34H27
7.8.1 Common tests. 35H27
7.8.2 Test for cells of BEV application . 36H29
7.8.3 Energy efficiency calculation for cells of HEV application . 37H30
Annex A (informative) Selective test conditions. 38H32
Annex B (informative) Cycle life test sequence . 39H34
Bibliography . 40H37

Figure 1 – Example of temperature measurement of cell . 41H9
Figure 2 – Examples of maximum dimension of cell . 42H11
Figure 3 – Test order of the current-voltage characteristic test . 43H15

62660-1 Ó IEC:2010 – 3 –
Figure 4 – Dynamic discharge profile A for BEV cycle test . 44H21

Figure 5 – Dynamic discharge profile B for BEV cycle test . 45H22

Figure 6 – Discharge-rich profile for HEV cycle test . 46H25

Figure 7 – Charge-rich profile for HEV cycle test . 47H26

Figure 8 – Typical SOC swing by combination of two profiles for HEV cycle test . 48H27

Figure B.1 – Test sequence of BEV cycle test . 49H35

Figure B.2 – Concept of BEV cycle test. 50H36

Table 1 – Discharge conditions . 51H12

Table 2 – Examples of charge and discharge current . 52H13
Table 3 – Dynamic discharge profile A for BEV cycle test . 53H21
Table 4 – Dynamic discharge profile B for BEV cycle test . 54H22
Table 5 – Discharge-rich profile for HEV cycle test . 55H25
Table 6 – Charge-rich profile for HEV cycle test. 56H26
Table A.1 – Capacity test conditions . 57H32
Table A.2 – Power test conditions . 58H32
Table A.3 – Cycle life test conditions . 59H32
Table A.4 – Conditions for energy efficiency test for BEV application . 60H33
Table B.1 – Test sequence of HEV cycle test . 61H36

– 4 – 62660-1 Ó IEC:2010
INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
SECONDARY LITHIUM-ION CELLS FOR THE PROPULSION

OF ELECTRIC ROAD VEHICLES –
Part 1: Performance testing
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way i
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.