IEC 60335-2-52:2021/AMD1:2026
(Amendment)Amendment 1 - Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances
- Status
- Published
- Publication Date
- 15-Nov-2026
- Technical Committee
- TC 61 - Safety of household and similar electrical appliances
- Drafting Committee
- MT 53 - TC 61/MT 53
- Current Stage
- PPUB - Publication issued
- Start Date
- 16-Nov-2026
- Completion Date
- 11-Dec-2026
Buy Documents
IEC 60335-2-52:2021/AMD1:2026 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances
IEC 60335-2-52:2021/AMD1:2026 - Amendement 1 - Appareils électrodomestiques et analogues - Sécurité - Partie 2-52: Exigences particulières pour les appareils d'hygiène buccale
IEC 60335-2-52:2021/AMD1:2026 is an IEC amendment to the safety standard for household and similar electrical appliances, focused on oral hygiene appliances such as electric toothbrushes. It updates requirements for children's instructions, temperature rise, mechanical strength, construction, and brush-head retention, and it adds ISO 20127:2025 as a normative reference for toothbrush-related testing.
What does IEC 60335-2-52:2021/AMD1:2026 specify?
IEC 60335-2-52:2021/AMD1:2026 specifies changes to the safety requirements in IEC 60335-2-52 for oral hygiene appliances. The amendment is organized by clause and updates clauses 2, 3, 7, 11, 21, 22, 25 and Annex B.
For a reader, that means this document is used to apply the revised safety rules to electric toothbrushes and similar products, especially where the appliance is intended for children or uses a battery-operated design.
What are the key requirements of IEC 60335-2-52:2021/AMD1:2026?
The amendment tightens several practical safety points for electric toothbrushes and related oral hygiene appliances. The main focus is on instructions for use, surface temperature, low-voltage construction, and the retention of brush parts during use.
Marking and instructions
Clause 7 changes the instructions for electric toothbrushes intended for children. If the appliance is intended for all children, the instructions must state that it is suitable for children. If it is intended only for a specific age range, the instructions must state that age range and warn against use by younger children.
If a toothbrush is shaped or decorated like a toy, the instructions must also warn that it is not a toy and must be inspected and maintained by an adult. In practice, this affects product labelling and user manuals, especially for child-oriented designs.
Heating and surface temperature
Clause 11 adds temperature-rise limits for accessible surfaces of hand-held parts. It also sets a specific limit for accessible surfaces of hand-held parts of toothbrushes intended for children.
For manufacturers, this means the handle and other touchable surfaces must be checked during normal operation, and the temperature-rise results must stay within the limits stated in the standard and in Table 101.
Mechanical strength
Clause 21 now requires the hand-held part, including its replacement brush, to avoid damage that would affect compliance with the insulation, moisture, accessibility and endurance clauses named in the standard. If anything becomes loose, it must not fit inside the small parts cylinder in Figure 13.
In practice, this is a pass-fail durability check. It is meant to show that a broken or loosened part does not create a choking hazard and does not undermine other safety requirements.
Construction and voltage limits
Clause 22 states that hand-held parts must meet class III construction requirements. It also limits the working voltage of hand-held parts and the output of detachable power supply parts, and it sets a lower voltage limit for children's electric toothbrushes except during charging.
The amendment also states that the clause on certain construction details does not apply to tufts and brush heads of toothbrushes, because those parts are checked under the new retention requirement instead.
Retention of tufts and brush heads
Clause 22.102 requires tufts and brush heads to stay securely in place and not become loose during use. Compliance is checked by inspection and by tests taken from ISO 20127:2025, with specified forces applied to the tufts and to the brush head.
This matters because loose filaments or a detached brush head can create a user-safety issue and can also show poor product robustness.
Battery-operated appliances
Annex B adds a voltage limit for hand-held parts of battery-operated appliances and repeats the lower voltage limit for toothbrushes intended for children. This links battery-powered designs to the same low-voltage safety approach used elsewhere in the amendment.
What terms does IEC 60335-2-52:2021/AMD1:2026 define?
- Brush head - the working end of a toothbrush to which the filaments are attached.
- Filament - a single strand within the brush head.
- Tuft - a group of filaments held closely together and attached to the brush head.
- Small parts cylinder - the reference gauge used to check whether a loose part is small enough to present a choking-type hazard.
Who uses IEC 60335-2-52:2021/AMD1:2026?
IEC 60335-2-52:2021/AMD1:2026 is used by manufacturers of electric toothbrushes and other oral hygiene appliances, especially when designing children’s models or battery-operated products. It is also used by test laboratories, certification bodies, quality managers, and technical buyers who need to verify safety performance, instruction content, voltage limits, temperature rise, and mechanical durability.
What changed in IEC 60335-2-52:2021/AMD1:2026 from the previous edition?
IEC 60335-2-52:2021/AMD1:2026 amends IEC 60335-2-52:2021 by adding ISO 20127:2025 as a normative reference and by adding definitions for brush head, filament, and tuft. It also revises instructions for children’s toothbrushes, adds heating limits, strengthens mechanical and construction requirements, introduces brush-part retention tests, deletes Clause 25.23, and updates Annex B for battery-operated appliances.
Which standards are used with IEC 60335-2-52:2021/AMD1:2026?
- ISO 20127:2025, Dentistry - Physical properties of powered toothbrushes - supplies the test methods used in Clause 22.102 for tuft and brush-head retention.
- IEC 60335 series - the wider family of household and similar electrical appliance safety parts referenced by the foreword as the related series for this document.
What does the IEC 60335-2-52:2021/AMD1:2026 document contain?
IEC 60335-2-52:2021/AMD1:2026 contains amendment text only, not a full rewritten standard. It updates clause text on normative references, terms and definitions, marking and instructions, heating, mechanical strength, construction, and supply connection, plus Annex B.
The document also points to specific test methods in ISO 20127:2025 and refers to Figure 13 for the small parts cylinder check. Table 101 is amended so its heading matches the revised temperature-rise wording for external accessible surfaces.
Relations
- Effective Date
- 07-Nov-2025
Buy Documents
IEC 60335-2-52:2021/AMD1:2026 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances
IEC 60335-2-52:2021/AMD1:2026 - Amendement 1 - Appareils électrodomestiques et analogues - Sécurité - Partie 2-52: Exigences particulières pour les appareils d'hygiène buccale
Get Certified
Connect with accredited certification bodies for this standard
CIS Institut d.o.o.
Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.

Kiwa BDA Testing
Building and construction product certification.
Kmetijski inštitut Slovenije
Agricultural Institute of Slovenia. Soil testing, plant health, agricultural product analysis.
Sponsored listings
Frequently Asked Questions
IEC 60335-2-52:2021/AMD1:2026 is a standard published by the International Electrotechnical Commission (IEC). Its full title is "Amendment 1 - Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances". This standard covers: Amendment 1 - Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances
IEC 60335-2-52:2021/AMD1:2026 is classified under the following ICS (International Classification for Standards) categories: 13.120 - Domestic safety; 97.170 - Body care equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
IEC 60335-2-52:2021/AMD1:2026 has the following relationships with other standards: It is inter standard links to IEC 60335-2-52:2021. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
IEC 60335-2-52:2021/AMD1:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
IEC 60335-2-52 ®
Edition 4.0 2026-11
INTERNATIONAL
STANDARD
AMENDMENT 1
Household and similar electrical appliances – Safety -
Part 2-52: Particular requirements for oral hygiene appliances
ICS 13.120; 97.170 ISBN 978-2-8327-1610-6
IEC 60335-2-52:2021-11/AMD1:2026-11 (en)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or
by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either
IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC copyright
or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local
IEC member National Committee for further information.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Discover our powerful search engine and read freely all the
The advanced search enables to find IEC publications by a publications previews, graphical symbols and the glossary.
variety of criteria (reference number, text, technical With a subscription you will always have access to up to date
committee, …). It also gives information on projects, content tailored to your needs.
replaced and withdrawn publications.
Electropedia - www.electropedia.org
The world's leading online dictionary on electrotechnology,
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published containing more than 22 500 terminological entries in English
details all new publications released. Available online and and French, with equivalent terms in 25 additional languages.
once a month by email. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer
Service Centre: sales@iec.ch.
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Household and similar electrical appliances -
Safety -
Part 2-52: Particular requirements for oral hygiene appliances
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s).
IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect
thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which may
be required to implement this document. However, implementers are cautioned that this may not represent the
latest information, which may be obtained from the patent database available at https://patents.iec.ch.
...
IEC 60335-2-52 ®
Édition 4.0 2026-11
NORME
INTERNATIONALE
AMENDEMENT 1
Appareils électrodomestiques et analogues - Sécurité -
Partie 2-52: Exigences particulières pour les appareils d'hygiène buccale
ICS 13.120; 97.170 ISBN 978-2-8327-1610-6
IEC 60335-2-52:2021-11/AMD1:2026-11 (fr)
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - IEC Products & Services Portal - products.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications gratuitement tous les aperçus des publications, symboles
IEC en utilisant différents critères (numéro de référence, graphiques et le glossaire. Avec un abonnement, vous aurez
texte, comité d’études, …). Elle donne aussi des toujours accès à un contenu à jour adapté à vos besoins.
informations sur les projets et les publications remplacées
ou retirées. Electropedia - www.electropedia.org
Le premier dictionnaire d'électrotechnologie en ligne au
IEC Just Published - webstore.iec.ch/justpublished monde, avec plus de 22 500 articles terminologiques en
Restez informé sur les nouvelles publications IEC. Just anglais et en français, ainsi que les termes équivalents
dans 25 langues additionnelles. Egalement appelé
Published détaille les nouvelles publications parues.
Disponible en ligne et une fois par mois par email. Vocabulaire Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-
nous: sales@iec.ch.
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
Appareils électrodomestiques et analogues -
Sécurité -
Partie 2-52: Exigences particulières pour les appareils d'hygiène buccale
AMENDEMENT 1
AVANT-PROPOS
1) La Commission Électrotechnique Internationale (IEC) est une organisation mondiale de normalisation composée
de l'ensemble des comités électrotechniques nationaux (Comités nationaux de l’IEC). L’IEC a pour objet de
favoriser la coopération internationale pour toutes les questions de normalisation dans les domaines de
l'électricité et de l'électronique. À cet effet, l’IEC – entre autres activités – publie des Normes internationales,
des Spécifications techniques, des Rapports techniques, des Spécifications accessibles au public (PAS) et des
Guides (ci-après dénommés "Publication(s) de l’IEC"). Leur élaboration est confiée à des comités d'études, aux
travaux desquels tout Comité national intéressé par le sujet traité peut participer. Les organisations
internationales, gouvernementales et non gouvernementales, en liaison avec l’IEC, participent également aux
travaux. L’IEC collabore étroitement avec l'Organisation Internationale de Normalisation (ISO), selon des
conditions fixées par accord entre les deux organisations.
2) Les décisions ou accords officiels de l’IEC concernant les questions techniques représentent, dans la mesure du
possible, un accord international sur les sujets étudiés, étant donné que les Comités nationaux de l’IEC intéressés
sont représentés dans chaque comité d’études.
3) Les Publications de l’IEC se présentent sous la forme de recommandations internationales et sont agréées
comme telles par les Comités nationaux de l’IEC. Tous les efforts raisonnables sont entrepris afin que l’IEC
s'assure de l'exactitude du contenu technique de ses publications; l’IEC ne peut pas être tenue responsable de
l'éventuelle mauvaise utilisation ou interprétation qui en est faite par un quelconque utilisateur final.
4) Dans le but d'encourager l'uniformité internationale, les Comités nationaux de l’IEC s'engagent, dans toute la
mesure possible, à appliquer de façon transparente les Publications de l’IEC dans leurs publications nationales
et régionales. Toutes divergences entre toutes Publications de l’IEC et toutes publications nationales ou
régionales correspondantes doivent être indiquées en termes clairs dans ces dernières.
5) L’IEC elle-même ne fournit aucune attestation de conformité. Des organismes de certification indépendants
fournissent des services d'évaluation de conformité et, dans certains secteurs, accèdent aux marques de
conformité de l’IEC. L’IEC n'est responsable d'aucun des services effectués par les organismes de certification
indépendants.
6) Tous les utilisateurs doivent s'assurer qu'ils sont en possession de la dernière édition de cette publication.
7) Aucune responsabilité ne doit être imputée à l’IEC, à ses administrateurs, employés, auxiliaires ou mandataires,
y compris ses experts particuliers et les membres de ses comités d'études et des Comités nationaux de l’IEC,
pour tout préjudice causé en cas de dommages corporels et matériels, ou de tout autre dommage de quelque
nature que ce soit, directe ou indirecte, ou pour supporter les coûts (y compris les frais de justice) et les dépenses
découlant de la publication ou de l'utilisation de cette Publication de l’IEC ou de toute autre Publication de l’IEC,
ou au crédit qui lui est accordé.
8) L'attention est attirée sur les références normatives citées dans cette publication. L'utilisation de publications
référencées est obligatoire pour une application correcte de la présente publication.
9) L'IEC attire l'attention sur le fait que la mise en application du présent document peut entraîner l'utilisation d'un
ou de plusieurs brevets. L'IEC ne prend pas position quant à la preuve, à la validité et à l'applicabilité de tout
droit de brevet revendiqué à cet égard. À la date de publication du présent document, l'IEC n'a pas reçu
notification qu'un ou plusieurs brevets pouvaient être nécessaires à sa mise en application. Toutefois, il y a lieu
d'avertir les responsables de la mise en application du présent document que des informations plus récentes
sont susceptibles de figurer dans la base de données de brevets, disponible à l'adresse https:/
...







