IEC 60335-2-113:2016/AMD1:2021

IEC 60335-2-113 ®
Edition 1.0 2021-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
A MENDMENT 1
AM ENDEMENT 1
Household and similar electrical appliances – Safety –
Part 2-113: Particular requirements for beauty care appliances incorporating
lasers and intense light sources

Appareils électrodomestiques et analogues – Sécurité –
Partie 2-113: Exigences particulières pour les appareils destinés aux soins
esthétiques comportant des lasers et des sources de lumière de forte intensité

IEC 60335-2-113:2016-04/AMD1:2021-11(en-fr)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - IEC online collection - oc.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 000 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
16 langues additionnelles. Egalement appelé Vocabulaire

Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc

Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 60335-2-113 ®
Edition 1.0 2021-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
A MENDMENT 1
AM ENDEMENT 1
Household and similar electrical appliances – Safety –

Part 2-113: Particular requirements for beauty care appliances incorporating

lasers and intense light sources

Appareils électrodomestiques et analogues – Sécurité –

Partie 2-113: Exigences particulières pour les appareils destinés aux soins

esthétiques comportant des lasers et des sources de lumière de forte intensité

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.120; 97.170 ISBN 978-2-8322-1043-9

–2 – IEC 60335-2-113:2016/AMD1:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-113: Particular requirements for beauty care appliances
incorporating lasers and intense light sources

AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to IEC 60335-2-113:2016 has been prepared by IEC technical committee 61:
Safety of household and similar electrical appliances.
The text of this Amendment is based on the following documents:
Draft Report on voting
61/6367/FDIS 61/6417/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Amendment is English.

© IEC 2021
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications/.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations may need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation nationally
not earlier than 12 months or later than 36 months from the date of publication.

IMPORTANT – The "colour inside" logo on the cover page of this document indicates that it
contains colours which are considered to be useful for the correct understanding of its
contents. Users should therefore print this document using a colour printer.

____________
Title of Part 2-113
Delete, in the existing title, "cosmetic and".
1 Scope
nd
Delete in the 2 paragraph, "cosmetic and".
2 Normative references
Replace the reference to ISO 7010 with the following new reference:
ISO 7010:2019, Graphical symbols – Safety colours and safety signs – Registered safety signs
3 Terms and definitions
In the Addition, replace "IEC 60825-1" by "IEC 60825-1:2014" and replace "IEC 62471" by
"IEC 62471:2006".
3.101 Replace the term and definition by the following:
accessible emission limit
maximum accessible emission permitted within a particular class of laser product

–4 – IEC 60335-2-113:2016/AMD1:2021
© IEC 2021
Note 1 to entry: Accessible emission limit is hereinafter referred to as AEL.
Note 2 to entry: Wherever the text refers to "emission level not exceeding the AEL" or similar wording, it is implicit
that the accessible emission is determined following the measurement criteria specified in Clause 5 of
IEC 60825-1:2014.
3.103 Replace the existing term and definition with "Void".
3.104 Replace the definition and Note 1 to entry by the following:
state that is established when the applicator is positioned at the target skin so that the skin
acts to effectively prevent stray optical radiation emission in excess of the AEL for Class 1
laser products or the emission limits for the exempt group for intense light sources
3.108 Replace the existing term and definition with "Void".

7 Marking and instructions
7.1 Addition
rd
Replace the 3 dashed item by the following:
– for Class 1C laser product appliances,
• sign shown in Figure 101; or
• warning sign ISO 7010-W004 (2019-07) and the substance of the following:
Laser radiation. Follow instructions. Class 1C laser product.
th
Replace, in the 4 dashed item, "symbol" by "warning sign".
7.6 Addition
Replace the first entry by the following:
[warning sign ISO 7010-W004 (2019-07)] Warning: Laser beam

Replace, in the second entry, "[symbol ISO 7010-W027 (2011-05)]" by "[warning sign ISO 7010-
W027 (2019-07)]".
7.12 Addition
th nd
Replace, in the 4 paragraph beginning with "For appliance incorporating lasers.", 2 dashed
item, "embedded laser" by "laser product".
th th
Delete, in the 4 paragraph of the Addition, 4 dashed item, "for a Class 1C laser product
appliance that contains an embedded laser".
Replace, in the last paragraph of the Addition, "symbol ISO 7000-1329" by "warning sign ISO
7010-W004, sign shown in Figure 101," and replace "symbol ISO 7010-W027" by "warning sign
ISO 7010-W027 (2019-07)".
© IEC 2021
7.14 Addition
Replace "outer diameter of symbol ISO 7000-1329" by "height of the triangle in warning sign
ISO 7010-W004, height of the sign shown in Figure 101,"
Replace "symbol ISO 7010-W
...