Surge arresters - Part 10: Rationale for tests specified by IEC 60099-4:2014

IEC TR 60099-10:2024 is applicable to all tests and arrester types included in IEC 60099-4:2014 and explains the rationale behind each test specified in that document.
This document does not contain requirements and is not intended to replace any clauses of IEC 60099-4:2014.

General Information

Status
Published
Publication Date
18-Jun-2024
Technical Committee
Current Stage
PPUB - Publication issued
Start Date
14-Jun-2024
Completion Date
19-Jun-2024
Ref Project

Buy Standard

Technical report
IEC TR 60099-10:2024 - Surge arresters - Part 10: Rationale for tests specified by IEC 60099-4:2014 Released:6/19/2024 Isbn:9782832289693
English language
61 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC TR 60099-10 ®
Edition 1.0 2024-06
TECHNICAL
REPORT
colour
inside
Surge arresters –
Part 10: Rationale for tests specified by IEC 60099-4:2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
IEC Secretariat Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC Products & Services Portal - products.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews, graphical symbols and the glossary.
committee, …). It also gives information on projects, replaced With a subscription you will always have access to up to date
and withdrawn publications. content tailored to your needs.
IEC Just Published - webstore.iec.ch/justpublished
Electropedia - www.electropedia.org
Stay up to date on all new IEC publications. Just Published
The world's leading online dictionary on electrotechnology,
details all new publications released. Available online and once
containing more than 22 500 terminological entries in English
a month by email.
and French, with equivalent terms in 25 additional languages.
Also known as the International Electrotechnical Vocabulary
IEC Customer Service Centre - webstore.iec.ch/csc
(IEV) online.
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC TR 60099-10 ®
Edition 1.0 2024-06
TECHNICAL
REPORT
colour
inside
Surge arresters –
Part 10: Rationale for tests specified by IEC 60099-4:2014
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.120.50; 29.240.10 ISBN 978-2-8322-8969-3
– 2 – IEC TR 60099-10:2024 © IEC 2024
CONTENTS
FOREWORD . 7
INTRODUCTION . 9
1 Scope . 10
2 Normative references . 10
3 Terms and definitions . 10
4 Structure of the document . 10
4.1 Content of each individual test rationale. 10
4.2 Relation between each test of IEC 60099-4:2014 and this document . 11
5 Insulation withstand tests rationale . 12
5.1 Arrester type for which the tests are applicable . 12
5.2 Purpose of the tests . 12
5.3 Historical notes . 12
5.4 Tests rationale . 12
5.4.1 General . 12
5.4.2 Sample selection rationale . 13
5.4.3 Test procedure rationale . 15
5.4.4 Evaluation rationale . 18
5.4.5 Common misunderstandings . 18
6 Residual voltage tests rationale . 19
6.1 Arrester type for which the tests are applicable . 19
6.2 Purpose of the tests . 19
6.3 Historical notes . 19
6.4 Tests rationale . 19
6.4.1 General . 19
6.4.2 Sample selection rationale . 20
6.4.3 Tests procedures rationale . 20
6.4.4 Evaluation rationale . 23
7 Test to verify long term stability under continuous operating voltage rationale . 23
7.1 Arrester type for which the test is applicable . 23
7.2 Purpose of the test . 23
7.3 Historical notes . 23
7.4 Test rationale . 24
7.4.1 General . 24
7.4.2 Sample selection rationale . 25
7.4.3 Test procedure rationale . 26
7.4.4 Evaluation rationale . 26
8 Test to verify the repetitive charge transfer rating (Q ) rationale . 26
rs
8.1 Arrester type for which the test is applicable . 26
8.2 Purpose of the test . 26
8.3 Historical notes . 26
8.4 Test rationale . 27
8.4.1 General . 27
8.4.2 Sample selection rationale . 27
8.4.3 Test procedure rationale . 27
8.4.4 Evaluation rationale . 28
8.4.5 Common misunderstandings . 28

9 Heat dissipation behavior of test sample rationale . 29
9.1 Arrester type for which the test is applicable . 29
9.2 Purpose of the test . 29
9.3 Historical notes . 29
9.4 Test rationale . 29
9.4.1 General . 29
9.4.2 Sample selection rationale . 30
9.4.3 Test procedure rationale . 30
9.4.4 Evaluation rationale . 30
10 Operating duty test rationale . 31
10.1 Arrester type for which the test is applicable . 31
10.2 Purpose of the test . 31
10.3 Historical notes . 31
10.4 Test rationale . 32
10.4.1 General . 32
10.4.2 Sample selection rationale . 32
10.4.3 Test procedure rationale . 32
10.4.4 Evaluation rationale . 34
10.4.5 Common misunderstandings . 35
11 Power-frequency voltage-versus-time test rationale . 35
11.1 Arrester type for which the test is applicable . 35
11.2 Purpose of the test . 35
11.3 Historical notes . 36
11.4 Test rationale . 36
11.4.1 General . 36
11.4.2 Sample selection rationale . 36
11.4.3 Test procedure rationale . 36
11.4.4 Evaluation rationale . 37
11.4.5 Common misunderstandings . 37
12 Tests of arrester disconnector rationale . 37
12.1 Arrester type for which the tests are applicable . 37
12.2 Purpose of the tests . 37
12.3 Historical notes . 38
12.4 Tests rationale . 38
12.4.1 General . 38
12.4.2 Sample selection rationale . 38
12.4.3 Tests procedure rationale . 38
12.4.4 Evaluation rationale . 38
13 Short-circuit tests rationale . 39
13.1 Arrester type for which the test is applicable . 39
13.2 Purpose of the test . 39
13.3 Historical notes . 39
13.4 Test rationale . 40
13.4.1 General . 40
13.4.2 Sample selection rationale . 41
13.4.3 Test procedure rationale . 41
13.4.4 Evaluation rationale . 43
13.4.5 Common misunderstandings . 44

– 4 – IEC TR 60099-10:2024 © IEC 2024
14 Test of the bending moment of porcelain-housed arresters rationale . 44
14.1 Arrester type for which the test is applicable . 44
14.2 Purpose of the test .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.