IEC 61196-1-314:2015

IEC 61196-1-314 ®
Edition 2.0 2015-08
INTERNATIONAL
STANDARD
Coaxial communication cables –
Part 1- 314: Mechanical test methods – Test for bending
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing more than 30 000 terms and
Technical Specifications, Technical Reports and other definitions in English and French, with equivalent terms in 15
documents. Available for PC, Mac OS, Android Tablets and additional languages. Also known as the International
iPad. Electrotechnical Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a More than 60 000 electrotechnical terminology entries in
variety of criteria (reference number, text, technical English and French extracted from the Terms and Definitions
committee,…). It also gives information on projects, replaced clause of IEC publications issued since 2002. Some entries
and withdrawn publications. have been collected from earlier publications of IEC TC 37,

77, 86 and CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
IEC 61196-1-314 ®
Edition 2.0 2015-08
INTERNATIONAL
STANDARD
Coaxial communication cables –

Part 1- 314: Mechanical test methods – Test for bending

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.120.10 ISBN 978-2-8322-2856-2

– 2 – IEC 61196-1-314:2015 © IEC 2015
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references. 6
3 Terms and definitions . 6
4 Bending around a test mandrel . 6
4.1 Equipment . 6
4.2 Test sample . 7
4.3 Procedure . 7
4.3.1 General . 7
4.3.2 Procedure 1 . 7
4.3.3 Procedure 2 . 7
4.3.4 Requirements . 7
4.3.5 Test report . 7
5 Repeated bending . 7
5.1 Equipment . 7
5.2 Test sample . 8
5.2.1 Sample length . 8
5.2.2 Termination. 8
5.3 Procedure . 8
5.4 Requirements . 8
5.5 Test report . 8
6 Flexing . 10
6.1 Equipment . 10
6.2 Test sample . 10
6.3 Procedure . 10
6.4 Requirements . 10
6.5 Test report . 10
7 Flexing endurance . 11
7.1 Equipment . 11
7.2 Test sample . 11
7.3 Procedure . 11
7.4 Requirements . 11
7.5 Test report . 11
8 Cable bending under tension (dynamic test) . 12
8.1 Equipment . 12
8.2 Test sample . 12
8.3 Procedure . 12
8.3.1 General . 12
8.3.2 Procedure 1 . 13
8.3.3 Procedure 2 . 13
8.4 Requirements . 13
8.5 Test report . 13
9 Stiffness . 14
9.1 General . 14
9.2 Equipment . 15
9.2.1 Method A . 15

9.2.2 Method B . 15
9.2.3 Method C . 15
9.3 Test sample . 15
9.4 Procedure . 15
9.4.1 Method A . 15
9.4.2 Method B . 16
9.4.3 Method C . 16
9.5 Requirements . 16
9.6 Test report . 16
10 Kink test . 18
10.1 Sample . 18
10.2 Equipment . 18
10.3 Procedure . 18
10.4 Requirement . 18
10.5 Test report . 18

Figure 1 – Repeated bending test for cable . 9
Figure 2 – Repeated bending test for cable/connector assembly . 9
Figure 3 – Flexing apparatus . 11
Figure 4 – Apparatus for cable flexing endurance test . 12
Figure 5 – U-bend . 14
Figure 6 – S-bend . 14
Figure 7 – Test set-up for method A: Three point bending test . 17
Figure 8 – Test set-up for method B: Cantilever test . 17
Figure 9 – Test set-up for compression force . 18
Figure 10 – Example of results of applied force and displacement . 18
Figure 11 – Kink test . 19

– 4 – IEC 61196-1-314:2015 © IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
COAXIAL COMMUNICATION CABLES –

Part 1- 314: Mechanical test methods –
Test for bending
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be cl
...