IEC 61784-5-10:2007

IEC 61784-5-10 ®
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Industrial communication networks – Profiles –
Part 5-10: Installation of fieldbuses – Installation profiles for CPF 10

Réseaux de communications industriels – Profils –
Partie 5-10: Installation de bus de terrain – Profils d'installation pour CPF 10

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les
microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
IEC 61784-5-10 ®
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Industrial communication networks – Profiles –

Part 5-10: Installation of fieldbuses – Installation profiles for CPF 10

Réseaux de communications industriels – Profils –

Partie 5-10: Installation de bus de terrain – Profils d'installation pour CPF 10

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX R
ICS 25.040; 35.100.05 ISBN 978-2-8322-0847-2

– 2 – 61784-5-10 © IEC:2007
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviated terms . 7
4 CPF 10: Overview of installation profiles . 7
5 Installation profile conventions . 7
6 Conformance to installation profiles . 8
Annex A (normative) CP 10/1 (Vnet/IP™) specific installation profile . 9
A.1 Installation profile scope . 9
A.2 Normative references . 9
A.3 Installation profile terms, definitions, and abbreviated terms . 9
A.3.1 Terms and definitions . 9
A.3.2 Abbreviated terms . 9
A.3.3 Conventions for installation profiles . 9
A.4 Installation planning . 9
A.4.1 Introduction . 9
A.4.2 Planning requirements . 9
A.4.3 Network capabilities . 10
A.4.4 Selection and use of cabling components . 12
A.4.5 Cabling planning documentation . 16
A.4.6 Verification of cabling planning specification . 16
A.5 Installation implementation . 16
A.5.1 General requirements . 16
A.5.2 Cable installation . 16
A.5.3 Connector installation . 16
A.5.4 Terminator installation . 16
A.5.5 Device installation . 16
A.5.6 Coding and labeling . 17
A.5.7 Earthing and bonding of equipment and devices and shield cabling . 17
A.5.8 As-implemented cabling documentation . 17
A.6 Installation verification and installation acceptance test . 17
A.6.1 Introduction . 17
A.6.2 installation verification . 17
A.6.3 Installation acceptance test . 18
A.7 Installation administration . 18
A.8 Installation maintenance and installation troubleshooting . 18
Bibliography . 19

Figure 1 – Standards relationships . 6

Table A.1 – Network characteristics for balanced cabling based on Ethernet . 11
Table A.2 – Network characteristics for optical fibre cabling . 11
Table A.3 – Information relevant to copper cable: fixed cables . 12
Table A.4 – Information relevant to copper cable: cords . 12

61784-5-10 © IEC:2007 – 3 –
Table A.5 – Information relevant to optical fibre cables . 13
Table A.6 – Connectors for balanced cabling CPs based on Ethernet . 14
Table A.7 – Optical fibre connecting hardware . 14

– 4 – 61784-5-10 © IEC:2007
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL COMMUNICATION NETWORKS –
PROFILES –
Part 5-10: Installation of fieldbuses –
Installation profiles for CPF 10

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61784-5-10 has been prepared by subcommittee 65C: Industrial
networks, of IEC technical committee 65: Industrial-process measurement, control and
automation.
This standard is to be used in conjunction with IEC 61918:2007.
This bilingual version (2013-07) corresponds to the monolingual English version, published in
2007-12.
The text of this standard is based on the following documents:
FDIS Report on voting
65C/471/FDIS 65C/482/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

61784-5-10 © IEC:2007 – 5 –
The French version of this standard has not been voted upon.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 61784-5 series, under the general title Industrial communication
networks – Profiles – Installation of fieldbuses, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
– 6 – 61784-5-10 © IEC:2007
INTRODUCTION
This International Standard is one of a series produced to facilitate the use of communication
networks in industrial control systems.
IEC 61918:2007 (Ed. 1.0) provides the common requirements for the installation of
communication networks in industrial control systems. This installation profile standard
provides the installation profiles of the communication profiles (CP) of a specific
communication profile family (CPF) by stating which requirements of IEC 61918 fully apply
and, where necessary, by supplementing, modifying, or replacing the other requirements (see
Figure 1).
For general background on fieldbuses, their profiles, and relationship between the installation
profiles specified in this standard, see IEC/TR 61158-1.
Each CP installation profile is specified in a separate annex of this standard. Each annex is
structured exactly as the reference standard IEC 61918 for the benefit of the persons
representing the roles in the fieldbus installation process as defined in IEC 61918 (planner,
installer, verification personnel, validation personnel, maintenance personnel, administration
personnel). By reading the installation profile in conjunction with IEC 61918, these persons
immediately know which requirements are common for the installation of all CPs and which
are modified or replaced. The conventions used to draft this standard are defined in Clause 5.
The provision of the installation profiles in one standard for each CPF (e.g. IEC 61784-5-10
for CPF 10), allows readers to work with standards of a convenient size.

DDESIESIGGNN
DDESIESIGGNN PPLLAANNINNINGNG,, E ETTC.C.
GGEENENERIRIC C
OOFFFFIICCE PRE PREMEMIISESSES
CCAABLBLIINGNG
IISSOO//IIEECC 11801 11801
ISISOO/IE/IECC
1476314763--22
BBETETWWEENEEN
AAUUTTOMOMAATTIIONON IISSOO//IIEECC 24702 24702
IISSLLANANDDSS
BBETETWWEENEEN
IIEECC 61784 61784--5 5
AAUUTTOMOMAATTIIONON
IIEECC 61918 61918
IINDUSNDUSTTRIRIAALL P PREREMMIISSEESS IIEECC 61158  61158
serseriieses
IISSLLANANDDSS
serseriieses
IInnsstatallllaatitioonn
anandd
pprroofifilleess
((CCoommmmoonn
WWITITHHININ
IIEECC 61784 61784--1,1, --22 ((SSeellececttiionon + +
rreeqquuiirreemmeenntsts))
AAUUTTOMOMAATTIIONON
AAdd/dd/RReeplpl//MModod))
IISSLLANANDDSS
CComommmon son sttrruuccttururee
AAPPPPLLICICAATTIOIONN--SPESPECCIIFFIICC
CCAABLBLIINGNG
Figure 1 – Standards relationships

61784-5-10 © IEC:2007 – 7 –
INDUSTRIAL COMMUNICATION NETWORKS –
PROFILES –
Part 5-10: Installation of fieldbuses –
Installation profiles for CPF 10

1 Scope
This part of IEC 61784 specifies the installation profile for CPF 10 (Vnet/IP™ ).
The installation profile is specified in the annex. This annex is read in conjunction with
IEC 61918:2007.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 61918:2007, Industrial communication networks – Installation of communication networks
in industrial premises
The normative references of IEC 61918:2007, Clause 2, apply. For profile specific normative
references, see Clause A.2.
3 Terms, definitions and abbreviated terms
For the purpose of this document, the terms, definitions and abbreviated terms of
IEC 61918:2007, Clause 3, apply. For profile specific terms, definitions and abbreviated terms,
see Clause A.3.
4 CPF 10: Overview of installation profiles
CPF 10 consists of one communication profile as specified in IEC 61784-2.
The installation requirements for CP 10/1 (Vnet/IP™) are specified in Annex A.
5 Installation profile conventions
The numbering of the clauses and subclauses in the annexes of this standard corresponds to
the numbering of IEC 61918:2007 main clauses and subclauses.
The annex clauses and subclauses of this standard supplement, modify, or replace the
respective clauses and subclauses in IEC 61918:2007.
Where there is no corresponding subclause of IEC 61918:2007 in the normative annexes in
this standard, the subclause of IEC 61918:2007 applies without modification.
The annex heading letter represents the installation profile assigned in Clause 4. The annex
heading number shall represent the corresponding numbering of IEC 61918:2007.
EXAMPLE  “Annex A.4.4” in IEC 61784-5-10 means that CP 10/1 specifies the Subclause 4.4 of IEC 61918:2007.
All main clauses of IEC 61918:2007 are cited and apply in full unless otherwise stated in each
normative installation profile annex.
______________
Vnet/IP™ is a trade name of Yokogawa Electric Corporation. This information is given for the convenience of
users of this International Standard and does not constitute an endorsement by IEC of the trademark holder or
any of its products. Compliance to this standard does not require use of the trade name Vnet/IP™. Use of the
trade name Vnet/IP™ requires permission of Yokogawa Electric Corporation.

– 8 – 61784-5-10 © IEC:2007
If all subclauses of a (sub)clause are omitted, then the corresponding IEC 61918 (sub)clause
applies.
If in a (sub)clause it is written “Not applicable”, then the corresponding IEC 61918 (sub)
clause does not apply.
If in a (sub)clause it is written “Addition”, then the corresponding IEC 61918 (sub)clause
applies with the additions written in the profile.
If in a (sub)clause it is written “Replacement”, then the text provided in the profile replaces the
text of the corresponding IEC 61918 (sub)clause.
NOTE A replacement can also comprise additions.
If in a (sub)clause it is written “Modification”, then the corresponding IEC 61918 (sub)clause
applies with the modifications written in the profile.
If all (sub)clauses of a (sub)clause are omitted but in this (sub)clause it is written “(sub)clause
x has “Addition” (or “Replacement”, or “Modification) or is “Not applicable””, then (sub)clause
x becomes valid as declared and all the other corresponding IEC 61918 (sub)clauses apply.
6 Conformance to installation profiles
Each installation profile within this standard includes part of IEC 61918:2007. It may also
include defined additional specifications.
as either
A statement of compliance to an installation profile of this standard shall be stated
Compliance to IEC 61784-5-10:2007 for CP 10/1 or
Compliance to IEC 61784-5-10 (Ed.1.0) for CP 10/1
where the name within the angle brackets < > is optional and the angle brackets are not to be
included.
NOTE The name may be the name of the profile, e.g. Vnet/IP.
If the name is a trade name then the permission of the trade name holder shall be required.
Product standards shall not include any conformity assessment aspects (including quality
management provisions), neither normative nor informative, other than provisions for product
testing (evaluation and examination).

______________
In accordance with ISO/IEC Directives.
The date should not be used when the edition number is used.

61784-5-10 © IEC:2007 – 9 –
Annex A
(normative)
CP 10/1 (Vnet/IP™) specific installation profile
A.1 Installation profile scope
Addition:
This standard specifies the installation profile for for Communication Profile CP 10/1 (Vnet/IP).
The CP 10/1 is specified in IEC 61784-2.
A.2 Normative references
A.3 Installation profile terms, definitions, and abbreviated terms
A.3.1 Terms and definitions
Addition:
A.3.1.1
Repeater HUB
the medium such as 1000BASE-T (with transmission speed of 1 Gbit/s) common type HUB
(concentrator device).
A.3.2 Abbreviated terms
A.3.3 Conventions for installation profiles
Not applicable.
A.4 Installation planning
A.4.1 Introduction
A.4.1.1 Objective
A.4.1.2 Cabling in industrial premises
A.4.1.3 The planning process
A.4.1.4 Specific requirements for CPs
Not applicable.
A.4.1.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702
A.4.2 Planning requirements
A.4.2.1 Safety
A.4.2.1.1 General
A.4.2.1.2 Electrical safety
A.4.2.1.3 Functional safety
Not applicable.
A.4.2.1.4 Intrinsic safety
Not applicable.
A.4.2.1.5 Safety of optical fibre communication systems
Not applicable.
– 10 – 61784-5-10 © IEC:2007
A.4.2.2 Security
Addition:
The automation island network shall be isolated from the office environment and the internet.
The planner should provide appropriate security through the use of gateways, firewalls,
routers and/or appropriate security software. Careful consideration should be given to the
placement of access ports to prevent unauthorized connection of devices into the automation
island network. Cabinets housing control networks should not be accessible to unauthorized
personnel. Cabling components should be protected from damage by machinery or tampering.
A.4.2.3 Environmental considerations and EMC
A.4.2.4 Specific requirements for generic cabling in accordance with ISO/IEC 24702
A.4.3 Network capabilities
A.4.3.1 Network topology
A.4.3.1.1 Common description
A.4.3.1.2 Basic physical topologies for passive networks
Not applicable.
A.4.3.1.3 Basic physical topologies for active networks
A.4.3.1.4 Combination of basic topologies
A.4.3.1.5 Specific requirements for CPs
Addition:
Doubled redundant physical networks, which has any topology specified in IEC 61918, 4.3.1.3,
shall be used.
A.4.3.1.6 Specific requirements for generic cabling in accordance with ISO/IEC
A.4.3.2 Network characteristics
A.4.3.2.1 General
A.4.3.2.2 Network characteristics for balanced cabling not based on Ethernet
Not applicable.
A.4.3.2.3 Network characteristics for balanced cabling based on Ethernet
Replacement:
Table A.1 provides values based on the template given in IEC 61918, Table 2.

61784-5-10 © IEC:2007 – 11 –
Table A.1 – Network characteristics for balanced cabling based on Ethernet
Characteristics CP 10/1
Supported data rates (Mbit/s)
1 000
b 100
Supported channel length (m)
Number of connections in the channel 6
a b
(max.)
Patch cord length (m) 80
Channel class per ISO/IEC 24702 D
a
(min.)
Cable category per ISO/IEC 24702 5
b
(min.)
Connecting HW category per ISO/IEC 5
c
Cable types No requirement;
up to manufacturers
differentiation
a
See IEC 61918, 4.4.3.2.
b
For the purpose of this table the channel definitions of ISO/IEC

24702 are applicable.
c
Additional information is available in IEC 61156 series.

A.4.3.2.4 Network characteristics for optical fibre cabling
Replacement:
Table A.2 provides values based on the template given in IEC 61918, Table 3.
Table A.2 – Network characteristics for optical fibre cabling
CP 10/1
Optical fibre type Description
Single mode silica Standard
Attenuation coefficient at 1 310 nm 0,5 dB/km
Bandwidth or equivalent at 1 310 nm 1 200 MHz x km
Alternative description
Mode field diameter (μm) 9.10
Outer diameter (μm) 125
Minimum length (m) 2
Maximum length (m) 5 000
A.4.3.2.5 Specific network characteristics
Addition:
Any repeater HUB shall not be used for CPF 10/1 network.

– 12 – 61784-5-10 © IEC:2007
A.4.3.2.6 Specific requirements for generic cabling in accordance with ISO/IEC
A.4.4 Selection and use of cabling components
A.4.4.1 Cable selection
A.4.4.1.1 Common description
A.4.4.1.2 Copper cables
A.4.4.1.2.1 Copper cables for Ethernet based CPs
Replacement:
Table A.3 provides values based on the template given in IEC 61918, Table 4.
Table A.3 – Information relevant to copper cable: fixed cables
Characteristic CP 10/1
Nominal impedance of cable (tolerance) 100 Ω ± 15 Ω
DCR of conductors < 9,38 Ω/100 m
DCR of shield < 62,5/D Ω/km
where D is the outside diameter of
the shield (mm)
Number of conductors 8
Shielding UTP
Colour code for conductor WH/OG, OG, WH/GN, BU, WH/BU,
GN, WH/BN, BN
Jacket colour requirements a
—
Jacket material No requirement;
up to manufacturers differentiation
Resistance to harsh environment (e.g. UV, oil
No requirement;
resist, LS0H)
up to manufacturers differentiation
Agency ratings No requirement
Other characteristics —
a
See A.4.4.6.3.
Replacement:
Table A.4 provides values based on the template given in IEC 61918, Table 5.
Table A.4 – Information relevant to copper cable: cords
Characteristic CP 10/1
Nominal impedance of cable (tolerance) 100 Ω ± 15 Ω
DCR of conductors < 9,38 Ω/100 m
DCR of shield < 62,5/D Ω/km
where D is the outside diameter of
the shield (mm)
Number of conductors 8
Length 100
Shielding UTP
Colour code for conductor WH/OG, OG, WH/GN, BU, WH/BU,
GN, WH/BN, BN
Jacket colour requirements a
—
61784-5-10 © IEC:2007 – 13 –
Characteristic CP 10/1
Jacket material No requirement;
up to manufacturers differentiation
Resistance to harsh environment (e.g. UV, oil No requirement;
resist, LS0H)
up to manufacturers differentiation
Agency ratings No requirement
a
See A.4.4.6.3.
A.4.4.1.2.2 Copper cables for non Ethernet based CPs
Not applicable.
A.4.4.1.3 Cable requirements for wireless installation
A.4.4.1.4 Optical fibre cables
Replacement:
Table A.5 provides values based on the template given in IEC 61918, Table 6.
Table A.5 – Information relevant to optical fibre cables
Characteristics    9.10/125 μm 50/125 μm 62,5/125 980/1 000 μm 200/230 μm step
single mode multimode μm step index index hard
silica silica multimode POF cladded silica
silica
Attenuation per km — — — — —
(650 nm)
Attenuation per km — — — — —
(820 nm)
Attenuation per km 0,5 dB/km — — — —
(1 310 nm)
Number of optical 2 — — — —
fibres
Connector type SC Duplex, — — — —
(duplex or simplex) LC
Jacket colour a — — — —
—
requirements
Jacket material No — — — —
requirement;
up to
manufacturers
differentiation
Resistance to No — — — —
harsh environment requirement;
(e.g. UV, oil resist, up to
LS0H) manufacturers
differentiation
Breakout Yes — — — —
a
See A.4.4.6.3.
A.4.4.1.5 Special purpose copper and optical fibre cables
A.4.4.1.6 Specific cable requirements for CPs
Not applicable.
– 14 – 61784-5-10 © IEC:2007
A.4.4.1.7 Specific requirements for generic cabling in accordance with ISO/IEC
A.4.4.2 Connecting hardware selection
A.4.4.2.1 Common description
A.4.4.2.2 Connecting hardware for balanced cabling CPs based on Ethernet
Replacement:
Table A.6 provides values based on the template given in IEC 61918, Table 7.
Table A.6 – Connectors for balanced cabling CPs based on Ethernet
IEC/PAS
a b b
IEC 60603-7-x IEC 61076-3-106 61076-3-117 IEC 61076-2-101
M12-4 with
(shielded) (unshielded) Variant 1 Variant 6 Variant 14 D-coding
CP 10/1 Yes Yes No No No No
a
For IEC 60603-7-x the connector selection is based on the desired channel performance.
b
Housings to protect connectors.

A.4.4.2.3 Connecting hardware for copper cabling CPs not based on Ethernet
Not applicable.
A.4.4.2.4 Connecting hardware requirements for wireless installation
A.4.4.2.5 Optical fibre connecting hardware
Replacement:
Table A.7 provides values based on the template given in IEC 61918, Table 9.
Table A.7 – Optical fibre connecting hardware

IEC 61754-2 IEC 61754-4 EN 50377-6-1 IEC 61754-20 IEC 61754-22 Others

BFOC/2,5 SC SC-RJ LC F-SMA
CP 10/1 No Yes No Yes No No
NOTE IEC 61754 series defines the optical fibre connector mechanical interfaces; performance
specifications for optical fibre connectors terminated to specific fibre types are standardised in IEC 60874
series.
A.4.4.2.6 Specific requirements for CPs
Not applicable.
A.4.4.2.7 Specific requirements for generic cabling in accordance with ISO/IEC
A.4.4.3 Connections within a channel/permanent link
A.4.4.4 Terminators
Not applicable.
A.4.4.5 Device location and connection
A.4.4.5.1 Common description
A.4.4.5.2 Specific requirements for CPs
Not applicable.
61784-5-10 © IEC:2007 – 15 –
A.4.4.5.3 Specific requirements for wireless installation
A.4.4.5.4 Specific requirements for generic cabling in accordance with ISO/IEC
A.4.4.6 Coding and labelling
A.4.4.6.1 Common description
A.4.4.6.2 Additional requirements for CPs
A.4.4.6.3 Specific requirements for CPs
Addition:
The planner shall request to use redundancy cables of different colours and identify each of
the two cables with labelling.
A.4.4.6.4 Specific requirements for generic cabling cabling in accordance with
ISO/IEC 24702
A.4.4.7 Earthing and bonding of equipment and devices and shielded cabling
A.4.4.7.1 Common description
A.4.4.7.2 Bonding and earthing of enclosures and pathway
A.4.4.7.3 Earthing methods
A.4.4.7.4 Shield earthing
A.4.4.7.5 Specific requirements for CPs
Addition:
If a device has a direct connection to earth at the communications port, then the cable shield
shall be opened at the device end.
A.4.4.7.6 Specific requirements for generic cabling in accordance with ISO/IEC
A.4.4.8 Storage and transportation of cables
A.4.4.9 Routing of cables
A.4.4.9.1 Common description
A.4.4.9.2 Cable routing of assemblies
A.4.4.9.3 Detailed requirements for cable routing inside enclosures
A.4.4.9.4 Cable routing inside buildings
A.4.4.9.5 Cable routing outside buildings
A.4.4.9.6 Installing redundant communication cables
Addition:
See also the requirements described in A.4.4.6.3 for cables used for redundancy.
A.4.4.9.7 Installing copper bus bars
A.4.4.10 Separation of circuits
A.4.4.11 Mechanical protection of cabling components
A.4.4.11.1 Common description
A.4.4.11.2 Specific requirements for CPs
Not applicable.
– 16 – 61784-5-10 © IEC:2007
A.4.4.11.3 Specific requirements for generic cabling in accordance with ISO/IEC
A.4.4.12 Installation in special areas
A.4.4.12.1 Common description
A.4.4.12.2 Specific requirements for CPs
Not applicable.
A.4.4.12.3 Specific requirements for generic cabling in accordance with ISO/IEC
A.4.5 Cabling planning documentation
A.4.5.1 Common description
A.4.5.2 Cabling planning documentation for CPs
A.4.5.3 Network certification documentation
A.4.5.4 Cabling planning documentation for generic cabling in accordance with
ISO/IEC 24702
A.4.6 Verification of cabling planning specification
A.5 Installation implementation
A.5.1 General requirements
A.5.2 Cable installation
A.5.2.1 General requirements for all cabling types
A.5.2.2 Installation and routing
A.5.2.3 Specific cable installation requirements for CPs
Not applicable.
A.5.2.4 Specific requirements for wireless installation
A.5.2.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702
A.5.3 Connector installation
A.5.3.1 Common description
A.5.3.2 Shielded connectors
A.5.3.3 Unshielded connectors
Not applicable.
A.5.3.4 Specific requirements for CPs
Not applicable.
A.5.3.5 Specific requirements for wireless installation
A.5.3.6 Specific requirements for generic cabling in accordance with ISO/IEC 24702
A.5.4 Terminator installation
Not applicable.
A.5.4.1 Common description
A.5.4.2 Specific requirements for CPs
Not applicable.
A.5.5 Device installation
A.5.5.1 Common description
A.5.5.2 Specific requirements for CPs
Not applicable.
61784-5-10 © IEC:2007 – 17 –
A.5.6 Coding and labeling
A.5.6.1 Common description
A.5.6.2 Specific requirements for CPs
Addition:
The installer shall use redundancy cables of different colours and identify each of the two
cables with labelling (see A.4.4.6.3).
A.5.7 Earthing and bonding of equipment and devices and shield cabling
A.5.7.1 Common description
A.5.7.2 Bonding and earthing of enclosures and pathways
A.5.7.3 Earthing methods
A.5.7.4 Shield earthing methods
A.5.7.5 Specific requirements for CPs
Addition:
If a device has a direct connection to earth at the communications port, then the cable shield
shall be opened at the device end.
A.5.7.6 Specific requirements for generic cabling in accordance with ISO/IEC 24702
A.5.8 As-implemented cabling documentation
A.6 Installation verification and installation acceptance test
A.6.1 Introduction
A.6.2 installation verification
A.6.2.1 General
A.6.2.2 Verification according to cabling planning documentation
A.6.2.3 Verification of earthing and bonding
A.6.2.4 Verification of shield earthing
A.6.2.5 Verification of cabling system
A.6.2.6 Cable selection verification
A.6.2.6.1 Common description
A.6.2.6.2 Specific requirements for CPs
Not applicable.
A.6.2.7 Connector verification
A.6.2.7.1 Common description
A.6.2.7.2 Specific requirements for CPs
Not applicable.
A.6.2.7.3 Specific requirements for wireless installation
A.6.2.8 Connection verification
A.6.2.9 Terminators verification
Not applicable.
A.6.2.10 Coding and labelling verification
A.6.2.10.1 Common description
A.6.2.10.2 Specific coding and labelling verification requirements
Addition:
– 18 – 61784-5-10 © IEC:2007
It shall be confirmed that two cables for redundancy are labelled for discrimination.
A.6.2.11 Verification report
A.6.3 Installation acceptance test
A.6.3.1 General
A.6.3.2 Acceptance test of Ethernet based cabling
A.6.3.3 Acceptance test of non Ethernet based cabling
Not applicable.
A.6.3.4 Specific requirements for wireless installation
A.6.3.5 Acceptance test report
A.7 Installation administration
A.7.8 is not applicable.
A.8 Installation maintenance and installation troubleshooting
A.8.4 is not applicable.
61784-5-10 © IEC:2007 – 19 –
Bibliography
[1] IEC/TR 61158-1, Industrial communication networks – Fieldbus specifications – Part 1:
Overview and guidance for the IEC 61158 and IEC 61784 series

_____________
– 20 – 61784-5-10 © CEI:2007
SOMMAIRE
AVANT-PROPOS . 22
INTRODUCTION . 24
1 Domaine d'application . 26
2 Références normatives . 26
3 Termes, définitions et abréviations . 26
4 CPF 10: Présentation générale des profils d'installation . 26
5 Conventions de profil d'installation . 26
6 Conformité aux profils d'installation . 27
Annexe A (normative) Profil d'installation spécifique au CP 10/1 (Vnet/IP ™) . 28
A.1 Domaine d'application du profil d'installation . 28
A.2 Références normatives . 28
A.3 Termes, définitions et abréviations concernant les profils d'installation . 28
A.3.1 Termes et définitions . 28
A.3.2 Abréviations . 28
A.3.3 Conventions pour les profils d'installation . 28
A.4 Planification d'installation . 28
A.4.1 Introduction . 28
A.4.2 Exigences de planification . 28
A.4.3 Capacités de réseau . 29
A.4.4 Choix et utilisation des composants de câblage . 30
A.4.5 Documentation relative à la planification de câblage . 35
A.4.6 Vérification de la spécification de planification de câblage . 35
A.5 Mise en œuvre de l'installation . 35
A.5.1 Exigences générales . 35
A.5.2 Installation des câbles . 35
A.5.3 Installation des connecteurs . 35
A.5.4 Installation des terminateurs . 35
A.5.5 Installation des dispositifs . 36
A.5.6 Codage et étiquetage . 36
A.5.7 Mise à la terre et liaison équipotentielle des équipements, dispositifs
et câblages blindés . 36
A.5.8 Documentation relative au câblage mis en œuvre . 36
A.6 Vérification et essai de réception de l'installation. 36
A.6.1 Introduction . 36
A.6.2 Vérification de l'installation . 36
A.6.3 Essai de réception de l'installation . 37
A.7 Administration de l'installation . 37
A.8 Maintenance de l'installation et recherche de pannes . 37
Bibliographie . 38

Figure 1 – Relations entre les normes . 25

Tableau A.1 – Caractéristiques de réseau pour le câblage symétrique à base Ethernet . 30
Tableau A.2 – Caractéristiques de réseau pour le câblage à fibres optiques . 30
Tableau A.3 – Informations appropriées aux câbles en cuivre: câbles fixes . 31

61784-5-10 © CEI:2007 – 21 –
Tableau A.4 – Informations appropriées aux câbles en cuivre: cordons . 31
Tableau A.5 – Informations appropriées aux câbles à fibres optiques . 32
Tableau A.6 – Connecteurs pour les CP à câblage symétrique à base Ethernet . 33
Tableau A.7 – Matériel de connexion à fibres optiques . 33

– 22 – 61784-5-10 © CEI:2007
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
RÉSEAUX DE COMMUNICATIONS INDUSTRIELS –
PROFILS –
Partie 5-10: Installation de bus de terrain –
Profils d'installation pour CPF 10

AVANT-PROPOS
1) La Commission Electrotechnique Internationale (CEI) est une organisation mondiale de normalisation
composée de l'ensemble des comités électrotechniques nationaux (Comités nationaux de la CEI). La CEI a
pour objet de favoriser la coopération internationale pour toutes les questions de normalisation dans les
domaines de l'électricité et de l'électron
...