ETSI EN 301 091-3 V1.1.0 (2013-02)

SLOVENSKI STANDARD
oSIST prEN 301 091-3 V 1.1.0:2014
01-november-2014
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50
1DSUDYHNUDWNHJDGRVHJD7UDQVSRUWQDLQSURPHWQDWHOHPDWLND7775DGDUVND
RSUHPDNLGHOXMHYIUHNYHQþQHPREPRþMXRG*+]GR*+]GHO
+DUPRQL]LUDQL(1NL]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYH5 77(]D
VLVWHPH]DRGNULYDQMHRYLUQDFHVWQRåHOH]QLãNLKSUHKRGLKNLGHOXMHMRY
IUHNYHQþQHPREPRþMXRG*+]GR*+]
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices
- Transport and Traffic Telematics (TTT); Radar equipment operating in the 76 GHz to 77
GHz range - Part 3: Harmonized EN covering the essential requirements of article 3.2 of
the R&TTE Directive for Railway/Road Crossings obstacle detection system applications
operating in the 76 GHz to 77 GHz range
Ta slovenski standard je istoveten z: EN 301 091-3 Version 1.1.0
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
oSIST prEN 301 091-3 V 1.1.0:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 301 091-3 V 1.1.0:2014

---------------------- Page: 2 ----------------------
oSIST prEN 301 091-3 V 1.1.0:2014
Draft ETSI EN 301 091-3 V1.1.0 (2014-07)






HARMONIZED EUROPEAN STANDARD
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Short Range Devices;
Transport and Traffic Telematics (TTT);
Radar equipment operating in the 76 GHz to 77 GHz range;
Part 3: Harmonized EN covering the essential requirements of
article 3.2 of the R&TTE Directive for Railway/Road Crossings
obstacle detection system applications
operating in the 76 GHz to 77 GHz range

---------------------- Page: 3 ----------------------
oSIST prEN 301 091-3 V 1.1.0:2014
 2 Draft ETSI EN 301 091-3 V1.1.0 (2014-07)




Reference
DEN/ERM-TGSRR-065-3
Keywords
harmonized standard, radar, railways, regulation
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2014.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 4 ----------------------
oSIST prEN 301 091-3 V 1.1.0:2014
 3 Draft ETSI EN 301 091-3 V1.1.0 (2014-07)

Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specifications . 11
4.1 Equipment requirements for testing purposes . 11
4.1.1 Choice of model for testing . 11
4.2 Mechanical and electrical design . 12
4.3 Auxiliary test equipment . 12
4.4 Interpretation of the measurement results . 12
5 Test conditions, power sources and ambient temperatures . 12
5.1 Normal and extreme test conditions . 12
5.2 External test power source. 12
5.3 Normal test conditions . 12
5.3.1 Normal temperature and humidity . 12
5.3.2 Normal test power source . 13
5.3.2.1 Mains voltage . 13
5.3.2.2 Other power sources . 13
5.4 Extreme test conditions . 13
5.4.1 Extreme temperatures . 13
5.4.1.1 Procedure for tests at extreme temperatures . 13
5.4.1.2 Extreme temperature ranges . 13
5.4.2 Extreme test source voltages . 13
5.4.2.1 Mains voltage . 13
5.4.2.2 Other power sources . 13
6 General conditions . 14
6.1 Test fixture . 14
6.1.1 Calibration . 15
6.1.2 General requirements for RF cables and waveguides . 15
6.1.3 Shielded anechoic chamber. 15
7 Methods of measurement and limits for transmitter parameters . 16
7.1 Permitted range of operating frequencies . 17
7.1.1 Definition . 17
7.1.2 Method of measurement . 17
7.1.3 Limits . 17
7.2 Radiated power measurements (e.i.r.p.) . 18
7.2.1 Definition . 18
7.2.1.1 Radiated mean power (e.i.r.p.) . 18
7.2.1.2 Maximum radiated peak power (e.i.r.p.) . 18
7.2.2 Method of measurements . 18
7.2.2.1 maximum radiated mean power (e.i.r.p.) . 18
7.2.2.2 for maximum radiated peak power (e.i.r.p.) . 19
7.2.2.3 Equipment with a fixed beam antenna (i.e. non-steerable by either mechanical or electronic
means) . 20
ETSI

---------------------- Page: 5 ----------------------
oSIST prEN 301 091-3 V 1.1.0:2014
 4 Draft ETSI EN 301 091-3 V1.1.0 (2014-07)

7.2.2.4 Equipment with (electronically or mechanically) steerable antenna(s) . 20
7.2.3 Limits . 20
7.2.3.1 Equipment with fixed beam antenna . 21
7.2.3.2 Equipment with (electronically or mechanically) steerable antennas . 21
7.3 Out-of-band emissions . 21
7.3.1 Definitions . 21
7.3.2 Measuring receiver . 21
7.3.3 Method of measurement . 22
7.3.4 Limits . 22
7.4 Radiated spurious emissions. 23
7.4.1 Definition . 23
7.4.2 Measuring receiver . 24
7.4.3 Method of measurement for radiated spurious emissions . 24
7.4.4 Limits . 25
8 Receiver . 25
8.1 Receiver radiated spurious emissions . 25
8.1.1 Method of measurement - radiated spurious emissions . 25
8.1.2 Limit . 26
9 Measurement uncertainty . 26
Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 27
Annex B (normative): Radiated measurements . 29
B.1 Test sites and general arrangements for measurements involving the use of radiated fields . 29
B.1.1 Open Area Test Site (OATS) . 29
B.1.2 Test antenna . 30
B.1.3 Standard position . 30
B.1.4 Indoor test site . 30
B.2 Guidance on the use of radiation test sites . 31
B.2.1 Measuring distance . 31
B.2.2 Test antenna . 31
B.2.3 Substitution antenna . 32
B.2.4 Auxiliary cables . 32
B.3 Alternative test site using a fully anechoic RF chamber . 32
B.3.1 Example of the construction of a shielded anechoic chamber . 32
B.3.2 Influence of parasitic reflections in anechoic chambers . 33
B.3.3 Calibration of the shielded RF anechoic chamber . 33
Annex C (normative): General description of measurement methods . 35
C.1 Radiated measurements . 35
Annex D (normative): Installation and operational requirements . 37
D.1 Installation requirements . 37
D.2 Operational requirements . 37
D.3 Definition of supervision area in the horizontal plane . 39
D.4 Protection zone in a vertical plane with the related emission levels . 39
D.5 Measurement of emission levels . 40
D.6 Emission limits of the installation . 41
D.6.1 Emission limits within the protected area / supervision area . 41
D.6.2 Emission limits outside the protected area / supervision area . 41
Annex E (informative): Example: How to convert Power Flux Density (PFD) to e.i.r.p. . 42
E.1 Notes. 42
E.2 Calculation Example . 42
ETSI

---------------------- Page: 6 ----------------------
oSIST prEN 301 091-3 V 1.1.0:2014
 5 Draft ETSI EN 301 091-3 V1.1.0 (2014-07)

Annex F (informative): Bibliography . 43
History . 44

ETSI

---------------------- Page: 7 ----------------------
oSIST prEN 301 091-3 V 1.1.0:2014
 6 Draft ETSI EN 301 091-3 V1.1.0 (2014-07)

Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This draft Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been produced by ETSI in response to mandate M/284 issued from the European
Commission under Directive 98/34/EC [i.2] as amended by Directive 98/48/EC [i.3].
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1].
The requirements relevant to Directive 1999/5/EC [i.1] are summarized in annex A.
The present document is part 3 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum
Matters (ERM); Short Range Devices; Transport and Traffic Telematics (TTT); Radar equipment operating in the
76 GHz to 77 GHz range, as identified below:
Part 1: "Technical characteristics and test methods for ground based vehicular radar equipment operating in the
76 GHz to 77 GHz range";
Part 2: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for ground
based vehicular radar equipment operating in the 76 GHz to 77 GHz range";
Part 3: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for
Railway/Road Crossings obstacle detection system applications operating in the 76 GHz to 77 GHz
range".
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "may not", "need", "need not", "will",
"will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms
for the expression of provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 8 ----------------------
oSIST prEN 301 091-3 V 1.1.0:2014
 7 Draft ETSI EN 301 091-3 V1.1.0 (2014-07)

1 Scope
The present document specifies the requirements for Short Range Devices (SRD) used for obstacle detection at
Railway/Road Crossings such as defined in CEPT/ERC Recommendation 70-03 annex 4 [i.10].
The present document applies to:
a) transmitters operating in the range from 76 GHz to 77 GHz;
b) receivers operating in the range from 76 GHz to 77 GHz.
The present document contains the technical characteristics and test methods for radar equipment fitted with integral
antennas operating in the frequency range from 76 GHz to 77 GHz and references CEPT/ERC/ECC Recommendation
for SRDs, CEPT/ERC Recommendation 70-03 [i.10] and the EC SRD Decision 2013/752/EU [i.11].
The present document does not necessarily include all the characteristics which may be required by a user, nor does it
necessarily represent the optimum performance achievable.
The present document covers integrated transceivers and separate transmit/receive modules in the range from 76 GHz to
77 GHz, see table 1.
Table 1: 76 GHz frequency bands
Frequency bands
Transmit 76 GHz to 77 GHz
Receive 76 GHz to 77 GHz

The present document is intended to cover the provisions of Directive 1999/5/EC [i.1] (R&TTE Directive) article 3.2,
which states that "… radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive [i.1] may apply to equipment within the scope of the present
document.
NOTE: A list of such ENs is included on the web site http://www.newapproach.org.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are necessary for the application of the present document:
[1] ETSI TR 100 028 (all parts) (V1.4.1) (12-2001): "Electromagnetic compatibility and Radio
spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment
characteristics".
[2] CISPR 16-2-3:2010+AMD1:2010+AMD2:2014 CSV: "Specification for radio disturbance and
immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances
and immunity - Radiated disturbance measurements".
ETSI

---------------------- Page: 9 ----------------------
oSIST prEN 301 091-3 V 1.1.0:2014
 8 Draft ETSI EN 301 091-3 V1.1.0 (2014-07)

2.2 Informative references
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[i.2] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations.
[i.3] Directive 98/48/EC of the European Parliament and of the Council of 20 July 1998 amending
Directive 98/34/EC laying down a procedure for the provision of information in the field of
technical standards and regulations.
[i.4] ETSI TR 102 704 (V1.2.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
System Reference Document; Short Range Devices (SRD); Radar sensors for non-automotive;
ground based vehicular applications in the 76 GHz to 77 GHz frequency range".
[i.5] Commission Directive 2004/104/EC of 14 October 2004 adapting to technical progress Council
Directive 72/245/EEC relating to the radio interference (electromagnetic compatibility) of vehicles
and amending Directive 70/156/EEC on the approximation of the laws of the Member States
relating to the type-approval of motor vehicles and their trailers.
[i.6] ETSI TR 102 273-2: "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Improvement on Radiated Methods of Measurement (using test site) and evaluation of the
corresponding measurement uncertainties; Part 2: Anechoic chamber".
[i.7] CEPT/ERC Recommendation 74-01, Cardiff 11: "Unwanted emissions in the spurious domain".
[i.8] Recommendation ITU-R SM.1754: "Measurement techniques of ultra-wideband transmissions".
[i.9] Recommendation ITU-R SM.329-12 (09-2012): "Unwanted emissions in the spurious domain, SM
Series, Spectrum management".
[i.10] CEPT/ERC Recommendation 70-03: "Relating to the use of Short Range Devices (SRD), Annex
4: Railway Applications".
[i.11] Commission Decision 2013/752/EU, amending Decision 2006/771/EC on Radiocommunication of
the radio spectrum for use by short-range devices.
[i.12] CEPT/ERC Recommendation 01-06: "Procedure for mutual recognition of type testing and type
approval for radio equipment".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [i.1] and the
following apply:
antenna cycle: one complete sweep of a mechanically or electronically scanned antenna beam along a predefined
spatial path
antenna scan duty factor: ratio of the area of the beam (measured at its 3 dB point) to the total area scanned by the
antenna (as measured at its 3 dB point)
assigned frequency band: frequency band within which the device is authorized to oper
...