ETSI EN 301 033 V1.2.1 (2005-12)

SLOVENSKI STANDARD
01-april-2006
(OHNWURPDJQHWQD]GUXåOMLYRVW(0&LQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50
7HKQLþQHNDUDNWHULVWLNHLQPHULOQHPHWRGH]DODGLMVNHVWUDåQHVSUHMHPQLNH]D
VSUHMHPGLJLWDOQHJDVHOHNWLYQHJDNOLFD'6&YSRPRUVNLKSDVRYLK0)0)+)LQ
9+)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical
characteristics and methods of measurement for shipborne watchkeeping receivers for
reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and VHF bands
Ta slovenski standard je istoveten z: EN 301 033 Version 1.2.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Technical characteristics and methods of measurement
for shipborne watchkeeping receivers
for reception of Digital Selective Calling (DSC)
in the maritime MF, MF/HF and VHF bands

2 ETSI EN 301 033 V1.2.1 (2005-12)

Reference
REN/ERM-TG26-065
Keywords
DSC, maritime, radio, receiver
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2005.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI EN 301 033 V1.2.1 (2005-12)
Contents
Intellectual Property Rights.7
Foreword.7
1 Scope.8
2 References.8
3 Definitions and abbreviations.9
3.1 Definitions.9
3.2 Abbreviations.9
4 General and operational requirements.10
4.1 General.10
4.2 Construction.10
4.2.1 General.10
4.2.2 Design.10
4.2.3 Accessibility.10
4.2.4 Calibration and maintenance.10
4.2.5 Antenna static protection.10
4.2.6 Digital input panels.10
4.3 Controls and indicators.11
4.3.1 General.11
4.3.2 Identification.11
4.3.3 Protection against possible maladjustment .11
4.3.4 Light sources.11
4.3.5 Operation.11
4.4 Software.11
4.5 Memory.11
4.6 Interfaces.11
4.6.1 DSC signal output; analogue interface.12
4.6.2 DSC signal output; digital interface.12
4.6.3 Operational interfaces.12
4.7 Marking and identification .12
4.8 Instructions.13
4.9 Warming-up period.13
4.10 Safety precautions.13
4.10.1 Excessive current and voltage.13
4.10.2 Earthing.13
4.10.3 Protection.13
4.11 Compass safe distance.13
5 Technical requirements.14
5.1 Frequency bands and channels .14
5.2 Mode of reception .14
5.3 Scanning receivers.15
5.3.1 Scanning sequence.15
5.3.2 Scanning frequencies.15
5.3.2.1 DSC distress frequencies.15
5.3.2.2 DSC frequencies for general communication.15
5.3.3 Stop/start of scanning.15
5.3.4 Frequency information.15
6 General test conditions.15
6.1 General.15
6.2 Test power source.16
6.3 Normal test conditions.16
6.3.1 Normal temperature and humidity.16
6.3.2 Normal test power source .16
6.3.2.1 ac voltage and frequency.16
ETSI
4 ETSI EN 301 033 V1.2.1 (2005-12)
6.3.2.2 Secondary battery power sources.16
6.3.2.3 Other power sources.16
6.4 Extreme test conditions .16
6.4.1 Extreme temperature tests.16
6.4.2 Extreme values of test power source .17
6.4.2.1 a.c. voltage and frequency.17
6.4.2.2 Secondary battery power sources.17
6.4.2.3 Other power sources.17
6.5 Connection of test signals to the receiver.17
6.5.1 Sources.17
6.5.2 Levels.17
6.6 Testing frequencies.17
6.6.1 General test frequencies.17
6.6.2 Additional test frequencies for HF equipment.18
6.7 Test signals.18
6.7.1 Standard test signal No. 1 .18
6.7.2 Standard test signal No. 2 .18
6.8 Measurement of bit error ratio.18
6.9 Measurement uncertainty and interpretation of the measuring results .19
6.9.1 Measurement uncertainty.19
6.9.2 Interpretation of measurement results.19
7 Environmental tests.19
7.1 Procedure.19
7.2 Performance check.20
7.3 Vibration test.20
7.3.1 Definition.20
7.3.2 Method of measurement.20
7.3.3 Requirement.20
7.4 Temperature tests.20
7.4.1 Dry heat.21
7.4.1.1 Definition.21
7.4.1.2 Method of measurement.21
7.4.1.3 Requirement.21
7.4.2 Damp heat.21
7.4.2.1 Definition.21
7.4.2.2 Method of measurement.21
7.4.2.3 Requirement.21
7.4.3 Low temperature.21
7.4.3.1 Definition.21
7.4.3.2 Method of measurement.22
7.4.3.3 Requirement.22
7.5 Corrosion test.22
7.5.1 General.22
7.5.2 Definition.22
7.5.3 Method of measurement.22
7.5.4 Requirements.22
8 MF/HF watchkeeping receiver.23
8.1 Calling sensitivity.23
8.1.1 Definition.23
8.1.2 Method of measurement.23
8.1.3 Limits.23
8.2 Adjacent channel selectivity.23
8.2.1 Definition.23
8.2.2 Method of measurement.23
8.2.3 Limits.24
8.3 Co-channel rejection.24
8.3.1 Definition.24
8.3.2 Method of measurements.24
8.3.3 Limits.24
8.4 RF intermodulation response.24
ETSI
5 ETSI EN 301 033 V1.2.1 (2005-12)
8.4.1 Definition.24
8.4.2 Method of measurement.24
8.4.3 Limits.24
8.5 Spurious response rejection.25
8.5.1 Definition.25
8.5.2 Method of measurement.25
8.5.3 Limits.26
8.6 Dynamic range.26
8.6.1 Definition.26
8.6.2 Method of measurement.26
8.6.3 Limits.26
8.7 Conducted spurious emissions into the antenna .26
8.7.1 Definition.26
8.7.2 Method of measurement.26
8.7.3 Limits.27
8.8 Radiated spurious emissions.27
8.8.1 Definition.27
8.8.2 Method of measurements.27
8.8.3 Limit.28
8.9 Protection of receiver antenna input circuits .28
8.9.1 Definition.28
8.9.2 Method of measurement.28
8.9.3 Limits.28
8.10 Scanning efficiency.28
8.10.1 Definition.28
8.10.2 Method of measurement.28
8.10.3 Limits.28
8.11 Stop/start of scanning (Watchkeeping receiver without DSC decoder) .29
8.11.1 Definition.29
8.11.2 Method of measurement.29
8.11.3 Limits.29
9 VHF watchkeeping receiver.29
9.1 Calling sensitivity.29
9.1.1 Definition.29
9.1.2 Method of measurement.29
9.1.3 Limits.29
9.2 Adjacent channel selectivity.29
9.2.1 Definition.29
9.2.2 Method of measurement.30
9.2.3 Limits.30
9.3 Co-channel rejection.30
9.3.1 Definition.30
9.3.2 Method of measurement.30
9.3.3 Limits.30
9.4 Intermodulation response.30
9.4.1 Definition.30
9.4.2 Method of measurement.31
9.4.3 Limits.31
9.5 Spurious response and blocking immunity.31
9.5.1 Definition.31
9.5.2 Method of measurement.31
9.5.3 Limits.31
9.6 Dynamic range.31
9.6.1 Definition.31
9.6.2 Method of measurement.32
9.6.3 Limit.32
9.7 Conducted spurious emissions into the antenna .32
9.7.1 Definition.32
9.7.2 Method of measurement.32
9.7.3 Limit.32
9.8 Radiated spurious emissions.32
ETSI
6 ETSI EN 301 033 V1.2.1 (2005-12)
9.8.1 Definition.32
9.8.2 Method of measurements.32
9.8.3 Limit.33
Annex A (normative): Radiated measurements .34
A.1 Test sites and general arrangements for measurements involving the use of radiated fields.34
A.1.1 Outdoor test site .34
A.1.2 Test antenna.35
A.1.3 Substitution antenna.35
A.1.4 Optional additional indoor site .35
A.2 Guidance on the use of radiation test sites .36
A.2.1 Measuring distance.36
A.2.2 Test antenna.36
A.2.3 Substitution antenna.36
A.2.4 Artificial antenna.37
A.2.5 Auxiliary cables.37
A.2.6 Acoustic measuring arrangement.37
A.3 Further optional alternative indoor test site using an anechoic chamber. .37
A.3.1 Example of the construction of a shielded anechoic chamber.38
A.3.2 Influence of parasitic reflections in anechoic chambers.38
A.3.3 Calibration of the shielded anechoic chamber.39
Annex B (informative): Bibliography.41
History .42

ETSI
7 ETSI EN 301 033 V1.2.1 (2005-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).

National transposition dates
Date of adoption of this EN: 23 September 2005
Date of latest announcement of this EN (doa): 31 December 2005
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 June 2006
Date of withdrawal of any conflicting National Standard (dow): 30 June 2006

ETSI
8 ETSI EN 301 033 V1.2.1 (2005-12)
1 Scope
The present document states the minimum operational and performance requirements for shipborne receivers intended
to be connected to an external installation, including a decoder for DSC, and used as receivers for watchkeeping DSC
on board ships operating in the mobile MF, MF/HF and VHF band allocated in the ITU Radio Regulations [1] to the
maritime mobile service, both in connection with distress and safety communication and in connection with general
communication.
These requirements include the relevant provisions of the ITU Radio Regulations [1], ITU-R Recommendations
M.493-11 [3], M.541-9 [11], M.489-2 [10] and the IMO Resolutions A.803(19), A.804(19), A.806(19) and A.694(17).
The present document specifies also technical characteristics, methods of testing and required test results for dedicated
watchkeeping receivers for use with radio installations in the GMDSS as required by chapter IV of the SOLAS.
It covers both receivers with analogue output or with digital DSC signal output interfaces or with both.
DSC watchkeeping receivers may be a separate equipment or be integrated with a DSC or radiotelephone equipment.
For integrated equipment the present document specifies the requirements and methods of testing of the DSC
watchkeeping receivers only.
DSC watchkeeping receivers can be either fixed-frequency receivers or, in MF/HF bands, scanning receivers.
Requirements for the DSC equipment or radiotelephone equipment are given in EN 300 338 [13], EN 300 162-1 [12]
and EN 300 373-1 [14] respectively.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
[1] ITU Radio Regulations (2001).
[2] ITU-T Recommendation E.161 (2001): "Arrangement of digits, letters and symbols on telephones
and other devices that can be used for gaining access to a telephone network".
[3] ITU-R Recommendation M.493-11 (2004): "Digital selective-calling system for use in the
maritime mobile service".
[4] ISO 3791 (1976): "Office machines and data processing equipment -- Keyboard layouts for
numeric applications".
[5] IEC 61162-1 (2000): "Maritime navigation and radiocommunication equipment and systems -
Digital interfaces - Part 1: Single talker and multiple listeners".
[6] ETSI TR 100 028-1 (2001): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Uncertainties in the measurement of mobile radio equipment characteristics; Part 1".
[7] ITU-T Recommendation V.11 (1993): "Electrical characteristics for balanced double-current
interchange circuits operating at data signalling rates up to 10 Mbit/s".
[8] IEC 60417: "Graphical symbols for use on equipment".
ETSI
9 ETSI EN 301 033 V1.2.1 (2005-12)
[9] ITU-R Recommendation SM.332-4 (1994): "Selectivity of receivers".
[10] ITU-R Recommendation M.489-2: "Technical characteristics of VHF radiotelephone equipment
operating in the maritime mobile service in channels spaced by 25 kHz".
[11] ITU-R Recommendation M.541-9 (2004): "Operational procedures for the use of digital selective-
calling equipment in the maritime mobile service".
[12] ETSI EN 300 162-1: "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF
bands; Part 1: Technical characteristics and methods of measurement".
[13] ETSI EN 300 338: "Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical
characteristics and methods of measurement for equipment for generation, transmission and
reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile
service".
[14] ETSI EN 300 373-1: "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Maritime mobile transmitters and receivers for use in the MF and HF bands; Part 1: Technical
characteristics and methods of measurement".
[15] NMEA 0183, version 3.01 (2002): "Standard for interfacing marine electronic devices".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
assigned frequency: centre of the frequency band assigned to a station
continuous watch: continuous watch means that the radio watch concerned is not interrupted other than for brief
intervals when the ship's receiving capability is impaired or blocked by its own communications or when the facilities
are under periodical maintenance or check
F1B: frequency modulation with digital information, without a sub-carrier for automatic reception
G2B: phase-modulation with digital information, with a sub-carrier for automatic reception
J2B: single sideband with digital information, with the use of a modulating sub-carrier for automatic reception, with the
carrier suppressed to at least 40 dB below peak envelope power
performance check: check of calling sensitivity (see clause 7.2)
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
a.c. alternating current
d.c. direct current
DSC Digital Selective Calling
e.m.f. electromotive force
EUT Equipment Under Test
FSK Frequency Shift Keying
GMDSS Global Maritime Distress and Safety System
HF High Frequency
IF Intermediate Frequency
IMO International Maritime Organization
MF Medium Frequency
MF/HF Medium and High Frequency
r.m.s. root mean square
ETSI
10 ETSI EN 301 033 V1.2.1 (2005-12)
RF Radio Frequency
SOLAS (International Convention for the) Safety of Life at Sea
VHF Very High Frequency
4 General and operational requirements
4.1 General
The manufacturer shall declare that compliance to the requirement of clause 4 is achieved and shall provide relevant
documentation.
4.2 Construction
4.2.1 General
The equipment shall be so constructed that it is capable of keeping continuous watch on relevant DSC channels
(see clause 5.1) and of being operated readily.
4.2.2 Design
In all respects the mechanical and electrical design and construction and the finish of the equipment shall conform with
good engineering practice, and the equipment shall be suitable for use on board ships at sea.
The equipment shall be designed for continuous operation.
4.2.3 Accessibility
All parts of the equipment that are subject to inspection and maintenance adjustments, shall be easily accessible.
Components shall be easily identifiable either by markings within the equipment, or with the aid of technical
descriptions.
4.2.4 Calibration and maintenance
The equipment shall be so constructed that its main modules can easily be replaced and put into operation without
elaborate recalibration or readjustment.
4.2.5 Antenna static protection
In order to protect against damage due to static voltages that may appear at the input of the receiver, there shall be a d.c.
path from the antenna terminal to ground not exceeding 100 kΩ.
4.2.6 Digital input panels
Where a digital input panel with the digits "0" to "9" is provided, the digits should be arranged to conform with
ITU-T Recommendation E.161 [2]. However, where an alphanumeric keyboard layout, as used on office machinery and
data processing equipme
...