ETSI EN 301 140-4-3 V1.1.3 (2000-05)

SLOVENSKI STANDARD
SIST EN 301 140-4-3:2001
01-september-2001
Inteligentno omrežje (IN) - Aplikacijski del inteligentnega omrežja (INAP) - 4. del:
Abstraktni preskušalni niz (ATS) in delna dodatna informacija za preskušanje
izvedbe protokola (PIXIT) - Specifikacija za funkcijo preklapljanja storitev (SSF) - 3.
podpoglavje: Funkcije posebnih virov (SRF)
Intelligent Network (IN); Intelligent Network Application Protocol (INAP); Capability Set 2
(CS2); Part 4: Abstract Test Suite (ATS) specification and Partial Protocol
Implementation eXtra Information for Testing (PIXIT) proforma for Service Switching
Function (SSF); Sub-part 3: Specialized Resource Functions (SRF)
Ta slovenski standard je istoveten z: EN 301 140-4-3 Version 1.1.3
ICS:
33.040.35 Telefonska omrežja Telephone networks
SIST EN 301 140-4-3:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 301 140-4-3:2001

---------------------- Page: 2 ----------------------

SIST EN 301 140-4-3:2001
ETSI EN 301 140-4-3 V1.1.3 (2000-05)
European Standard (Telecommunications series)
Intelligent Network (IN);
Intelligent Network Application Protocol (INAP);
Capability Set 2 (CS2);
Part 4: Abstract Test Suite (ATS) specification and Partial
Protocol Implementation eXtra Information for Testing (PIXIT)
proforma for Service Switching Function (SSF);
Sub-part 3: Specialized Resource Functions (SRF)
�

---------------------- Page: 3 ----------------------

SIST EN 301 140-4-3:2001
2 ETSI EN 301 140-4-3 V1.1.3 (2000-05)
Reference
DEN/SPS-03038-4-3
Keywords
IN, CS2, INAP, ATS, PIXIT, SSF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.:+33492944200 Fax:+33493654716
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network
drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 301 140-4-3:2001
3 ETSI EN 301 140-4-3 V1.1.3 (2000-05)
Contents
Intellectual Property Rights.4
Foreword .4
1 Scope.5
2 References.5
Annex A (normative): TTCN of the ATS for INAP CS2 CPH .6
A1 The TTCN Graphical form (TTCN.GR).6
A2 The TTCN Machine Processable form (TTCN.MP) .6
Annex B (normative): Partial PIXIT proforma for SRF .7
B.1 Identification summary .7
B.2 ATS summary .7
B.3 Test laboratory .7
B.4 Client identification .7
B.5 SUT .8
B.6 Protocol layer information .8
B.6.1 Protocol identification .8
B.6.2 IUT information .8
B.6.2.1 Implicit send events .8
B.6.2.2 Core INAP Parameter values.9
Annex C (normative): Protocol Conformance Test Report (PCTR) proforma for SRF .11
C.1 Identification summary .11
C.1.1 Protocol conformance test report.11
C.1.2 IUT identification.11
C.1.3 Testing environment.11
C.1.4 Limits and reservation .12
C.1.5 Comments.12
C.2 IUT conformance status .12
C.3 Static conformance summary.12
C.4 Dynamic conformance summary.13
C.5 Static conformance review report .13
C.6 Test campaign report.14
C.7 Observations.15
History.16
ETSI

---------------------- Page: 5 ----------------------

SIST EN 301 140-4-3:2001
4 ETSI EN 301 140-4-3 V1.1.3 (2000-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect
of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server
(http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)
which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Services and
Protocols for Advanced Networks (SPAN).
The present document is part 4, sub-part 3 of a multi-part EN covering the Intelligent Network Application Protocol
(INAP) Capability Set 2 (CS2), as identified below:
Part 1: "Protocol specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for Service Switching Function (SSF)";
Part 4: "Abstract Test Suite (ATS) specification and Partial Protocol Implementation eXtra Information
for Testing (PIXIT) proforma for Service Switching Function (SSF)";
Sub-part 1: "Basic capability set of CS-1 including CS-2 complements";
Sub-part 2: "Call Party Handling (CPH)";
Sub-part 3: "Specialized Resource Functions (SRF)";
Part 5: "Distributed Functional Plane (DFP) [ITU-T Recommendation Q.1224 [10] (1997) modified]".
National transposition dates
Date of adoption of this EN: 28 April 2000
Date of latest announcement of this EN (doa): 31 July 2000
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2001
Date of withdrawal of any conflicting National Standard (dow): 31 January 2001
ETSI

---------------------- Page: 6 ----------------------

SIST EN 301 140-4-3:2001
5 ETSI EN 301 140-4-3 V1.1.3 (2000-05)
1 Scope
The present document provides the Abstract Test Suite (ATS) for testing of the Service Switching Function (SSF) and
the Specialized Resource Function (SRF) of the core Intelligent Network Application Protocol (INAP) of Intelligent
Network (IN) according to EN 301 140-1 [1].
In this part 4-3, the SRF is covered.
Annex A provides the Tree and Tabular Combined Notation (TTCN).
Annex B provides the Partial Protocol Implementation eXtra Information for Testing (PIXIT) Proforma.
Annex C provides the Protocol Conformance Test Report (PCTR) Proforma.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
• A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
[1] ETSI EN 301 140-1: "Intelligent Network (IN); Intelligent Network Application Protocol (INAP);
Capability Set 2 (CS2); Part 1: Protocol specification".
[2] ETSI EN 301 140-4-1: "Intelligent Network (IN); Intelligent Network Application Protocol
(INAP); Capability Set 2 (CS2); Part 4: Abstract Test Suite (ATS) specification and Partial
Protocol Implementation eXtra Information for Testing (PIXIT) proforma for Service Switching
Function (SSF); Sub-part 1: Basic capability set of CS-1 including CS-2 complements".
[3] ETSI EN 301 140-2: "Intelligent Network (IN); Intelligent Network Application Protocol (INAP);
Capability Set 2 (CS2); Part 2: Protocol Implementation Conformance Statement (PICS) proforma
specification".
[4] ISO/IEC 9646-6: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 6: Protocol profile test specification".
[5] ISO/IEC 9646-3: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)".
ETSI

---------------------- Page: 7 ----------------------

SIST EN 301 140-4-3:2001
6 ETSI EN 301 140-4-3 V1.1.3 (2000-05)
Annex A (normative):
TTCN of the ATS for INAP CS2 CPH
Refer to EN 301 140-4-1 [2] clauses 1 to 7 for the methodology to obtain the TTCN, as well as the ATS convention, etc.
This ATS has been produced using the Tree and Tabular Combined Notation (TTCN) according to ISO/IEC 9646-3 [5].
The ATS was developed on a separate TTCN software tool and therefore the TTCN tables are not completely
referenced in the table of contents. The ATS itself contains a test suite overview part which provides additional
information and references.
A1 The TTCN Graphical form (TTCN.GR)
The TTCN.GR representation of this ATS is contained in an Adobe Portable Document Format™ file
(SFR_cs2_v5.PDF contained in archive en_3011400403v010103p0.ZIP) which accompanies the present document.
A2 The TTCN Machine Processable form (TTCN.MP)
The TTCN.MP representation corresponding to this ATS is contained in an ASCII file (SFR_cs2_v5.MP contained in
archive en_3011400403v010103p0.ZIP) which accompanies the present document.
ETSI

---------------------- Page: 8 ----------------------

SIST EN 301 140-4-3:2001
7 ETSI EN 301 140-4-3 V1.1.3 (2000-05)
Annex B (normative):
Partial PIXIT proforma for SRF
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users
of the present document may freely reproduce the PIXIT proforma in this annex so that it can be used for its intended
purposes and may further publish the completed PIXIT.
The PIXIT proforma is based on ISO/IEC 9646-6. Any additional information needed can be found in this international
standard document.
B.1 Identificat
...