ETSI TS 119 534-1 V1.1.1 (2019-02)
Electronic Signatures and Infrastructures (ESI); Testing Conformance and Interoperability of Registered Electronic Mail Services; Part 1: Testing conformance
Electronic Signatures and Infrastructures (ESI); Testing Conformance and Interoperability of Registered Electronic Mail Services; Part 1: Testing conformance
DTS/ESI-0019534-1
General Information
Standards Content (Sample)
TECHNICAL SPECIFICATION
Electronic Signatures and Infrastructures (ESI);
Testing Conformance and Interoperability of
Registered Electronic Mail Services;
Part 1: Testing conformance
2 ETSI TS 119 534-1 V1.1.1 (2019-02)
Reference
DTS/ESI-0019534-1
Keywords
conformance, registered electronic mail, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2019.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners. ®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
3 ETSI TS 119 534-1 V1.1.1 (2019-02)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Overview . 8
5 Test assertions for SMIME section header fields specified by ETSI EN 319 532-3 . 9
5.1 Introduction . 9
5.2 Test assertions for fields in the outermost MIME section header . 9
5.3 Test assertions for fields in the signed data MIME section header . 23
5.4 Test assertions for fields in REMS introduction MIME section header . 24
5.4.1 Test assertions for Introduction MIME section header . 24
5.4.2 Test assertions for free text MIME subsection header . 25
5.4.3 Test assertions for HTML MIME subsection header . 26
5.5 Test assertions for fields in original message MIME section header . 27
5.6 Test assertions for fields in REMS extension MIME section header . 30
5.7 Test assertions for fields in ERDS evidence MIME section header . 33
5.7.1 Test assertions for ERDS evidence MIME section header with XML ERDS evidence . 33
5.7.2 Test assertions for ERDS evidence MIME section header with PDF ERDS evidence . 36
5.8 Test assertions for fields in REMS signature MIME section header . 38
6 Test assertions for MIME sections bodies. 41
6.1 Introduction . 41
6.2 Test assertions for Introduction MIME section body . 41
7 Test assertions for REM messages structures . 41
7.1 Introduction . 41
7.2 Test assertions for REM payload structure . 42
7.3 Test assertions for REMS notification structure . 43
7.4 Test assertions for REMS receipt structure . 44
7.5 Test assertions for REM dispatch structure . 46
8 Test assertions for REMS signatures formats . 47
8.1 Introduction . 47
8.2 Test assertions for signatures individually signing ERDS evidence . 47
8.3 Test assertions for signatures signing REM messages . 48
9 Test assertions for Common Service Interface . 50
9.1 Introduction . 50
9.2 Test assertions for routing information . 50
9.3 Test assertions for trust information binding . 51
9.4 Test assertions for capability management . 53
10 Test assertions for ERDS evidence structure and content . 54
11 Test assertions for provision of the service . 55
11.1 Introduction . 55
11.2 Test assertions on generation of ERDS evidence in response to events . 55
11.3 Test assertions on REM interfaces . 59
11.3.1 Introduction. 59
ETSI
4 ETSI TS 119 534-1 V1.1.1 (2019-02)
11.3.2 Security measures on REM interfaces . 59
11.3.3 Test assertions on provision of REM interfaces . 61
History . 64
ETSI
5 ETSI TS 119 534-1 V1.1.1 (2019-02)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI).
The present document is part 1 of a multi-part deliverable covering Registered Electronic Mail Services, as identified
below:
Part 1: "Testing conformance";
Part 2: "Test suites for interoperability testing of providers using same format and transport protocols";
Part 3: "Test suites for interoperability testing of providers using different format and transport protocols".
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
6 ETSI TS 119 534-1 V1.1.1 (2019-02)
1 Scope
The present document defines the set of checks to be performed for testing conformance in the provision of Registered
Electronic Mail Services against the specific technical requirements defined in ETSI EN 319 532-3 [1] and against
technical requirements for the provision of the service defined in ETSI EN 319 532-1 [2].
More specifically, the present document defines test assertions for testing conformance regarding:
1) The construction of MIME and SMIME headers (clause 5) and bodies (clause 6) in ETSI EN 319 532-3 [1].
2) The construction of REM messages (clause 7).
3) The generation of digital signatures in REM messages and ERDS evidence (clause 8)
4) Some aspects of the Common Service Interface (clause 9).
5) The structure and contents of ERDS evidence (clause 10).
6) Relevant aspects of the provision of the service, namely: the generation of ERDS evidence following certain
events, and the security measures in the relevant interfaces defined in ETSI EN 319 532-3 [1], clause 11.
The present document does not define the checks to be performed for testing conformance in the provision of
Registered Electronic Mail Services against technical requirements defined in none of the technical specifications on
which ETSI EN 319 532-3 [1] is built.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 319 532-3: "Electronic Signatures and Infrastructures (ESI); Registered Electronic Mail
(REM) Services; Part 3: Formats".
[2] ETSI EN 319 532-1: "Electronic Signatures and Infrastructures (ESI); Registered Electronic Mail
(REM) Services; Part 1: Framework and architecture".
[3] IETF RFC 5751: "Secure/Multipurpose Internet Mail Extensions (S/MIME) Version 3.2 Message
Specification".
[4] IETF RFC 5322 (October 2008): "Internet Message Format".
[5] ETSI EN 319 522-1: "Electronic Signatures and Infrastructures (ESI); Electronic Registered
Delivery Services; Part 1: Framework and Architecture".
[6] OASIS Standard: "Test Assertions Model Version 1.0".
[7] ETSI TS 119 524-1: "Electronic Signatures and Infrastructures (ESI); Testing Conformance and
Interoperability of Electronic Registered Delivery Services; Part 1: Testing conformance".
[8] ETSI EN 319 522-2: "Electronic Signatures and Infrastructures (ESI); Electronic Registered
Delivery Services; Part 2: Semantic Contents".
ETSI
7 ETSI TS 119 534-1 V1.1.1 (2019-02)
[9] ETSI EN 319 522-3: "Electronic Signatures and Infrastructures (ESI); Electronic Registered
Delivery Services; Part 3: Formats".
[10] ETSI TS 119 612: "Electronic Signatures and Infrastructures (ESI); Trusted Lists".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI EN 319 532-4: "Electronic Signatures and Infrastructures (ESI); Registered Electronic Mail
(REM) Services; Part 4: Interoperability profiles".
[i.2] ETSI TS 119 312: "Electronic Signatures and Infrastructures (ESI); Cryptographic Suites".
[i.3] IETF RFC 2046: "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types".
[i.4] IETF RFC 6931 (April 2013): "Additional XML Security Uniform Resource Identifiers (URIs)".
[i.5] ETSI EN 319 142-1: "Electronic Signatures and Infrastructures (ESI);PAdES digital signatures;
Part 1: Building blocks and PAdES baseline signatures".
[i.6] ETSI EN 319 122-1: "Electronic Signatures and Infrastructures (ESI); CAdES digital signatures;
Part 1: Building blocks and CAdES baseline signatures".
[i.7] ETSI EN 319 522-4-3: "Electronic Signatures and Infrastructures (ESI); Electronic Registered
Delivery Services; Part 4: Bindings; Sub-part 3: Capability/requirements bindings".
[i.8] IETF RFC 5321: "Simple Mail Transfer Protocol".
[i.9] IETF RFC 5246: "The Transport Layer Security (TLS) Protocol Version 1.2".
[i.10] IETF RFC 3501: "Internet Message Access Protocol - Version 4rev1".
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in ETSI EN 319 532-1 [2] apply.
3.2 Symbols
Void.
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
ARI Acceptance/Rejection Interface
CA Certification Authority
CSI Common Service Infrastructure
ERDS Electronic Registered Delivery Service
ETSI
8 ETSI TS 119 534-1 V1.1.1 (2019-02)
ERDSP Electronic Registered Delivery Service Provider
ERD-UA Electronic Registered Delivery - User Agent
ERI Evidence Retrieval Interface
IMAP Internet Mail Access Protocol
MEPI Message and Evidence Push Interface
MERI Message and Evidence Retrieval Interface
MRI Message Retrieval Interface
MSI Message Submission Interface
POP Post Office Protocol
REM Registered Electronic Mail
REMS Registered Electronic Mail Service
REMSP Registered Electronic Mail Service Provider
RI Relay Interface
R-REMS Recipient's REMS
S&N Store and Notify
S/MIME Secure/Multipurpose Internet Mail Extensions
SMIME Secure Multipurpose Internet Mail Extensions
SMTP Simple Mail Transfer Protocol
S-REMS Sender's REMS
TL Trusted List
TLS Transport Layer Security
TSP Trust Service Provider
UID Unique IDentifier
URI Uniform Resource Identifier
URL Universal Resource Locator
UTF Unicode Transformation Format
XML eXtensible Mark-up Language
4 Overview
The present clause describes the main aspects of the technical approach used for specifying the whole set of tests to be
performed for testing conformance against ETSI EN 319 532-3 [1] with the scope defined in clause 1 of the present
document.
No tests are included testing conformance on requirements not specified in ETSI EN 319 532-3 [1].
The tests are defined using recent developments in testing fields. The selected technology is the test assertions as
specified in OASIS Standard [6]. In consequence, the tests will be defined as test assertions.
Each test assertion defined in the present document will include:
1) Unique identifier for further referencing. The identifiers of the assertions defined within the present document
will start with one code identifying the set of requirements the assertion corresponds to.
2) Reference to the Normative source for the test.
3) The Target of the assertion. In the normative part, this field identifies services whose technical
implementation conforms to the requirements specified in ETSI EN 319 532-3 [1].
4) Predicate fully and unambiguously defining the assertion to be tested by tools claiming conformance to the
present document.
5) Prescription level. Three levels are defined: mandatory, recommended and optional.
6) Tag. If assigned to test assertions it allows their categorization and grouping.
ETSI
9 ETSI TS 119 534-1 V1.1.1 (2019-02)
5 Test assertions for SMIME section header fields
specified by ETSI EN 319 532-3
5.1 Introduction
This clause defines the whole set of assertions required for testing compliance of the requirements defined by ETSI
EN 319 532-3 [1] for the header fields present in the following REM messages' MIME section headers:
1) The outermost MIME section header.
2) The signed data MIME section header.
3) The REMS introduction MIME section header.
4) The original message MIME section header.
5) The REMS extension MIME section header.
6) The ERDS evidence MIME section header.
7) The REMS signature MIME section header.
5.2 Test assertions for fields in the outermost MIME section
header
REMS/HEADER/OUT/FIELD/TA_01
TA Id REMS/HEADER/OUT/FIELD/TA_01
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Content-Type
The value for this header field shall be "multipart/signed":
• 'protocol' parameter value shall be "application/pkcs7-signature"
• 'micalg' parameter value should be conformant to ETSI TS 119 312 [i.2]
• 'boundary' parameter value should be conformant to IETF RFC 2046 [i.3], section 5.1.1
Target Conformance to outermost MIME section header
Predicate The value of 'Content-Type' field of the outermost MIME section header is "multipart/signed"
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_02
TA Id REMS/HEADER/OUT/FIELD/TA_02
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Content-Type
The value for this header field shall be "multipart/signed":
• 'protocol' parameter value shall be "application/pkcs7-signature"
• 'micalg' parameter value should be conformant to ETSI TS 119 312 [i.2]
• 'boundary' parameter value should be conformant to IETF RFC 2046 [i.3], section 5.1.1
Target Conformance to outermost MIME section header
Predicate The value of parameter 'protocol' of 'Content-Type' field is "application/pkcs7-signature"
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
ETSI
10 ETSI TS 119 534-1 V1.1.1 (2019-02)
REMS/HEADER/OUT/FIELD/TA_03
TA Id REMS/HEADER/OUT/FIELD/TA_03
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Content-Type
The value for this header field shall be "multipart/signed":
• 'protocol' parameter value shall be "application/pkcs7-signature"
• 'micalg' parameter value should be conformant to ETSI TS 119 312 [i.2]
• 'boundary' parameter value should be conformant to IETF RFC 2046 [i.3], section 5.1.1
Target Conformance to outermost MIME section header
Predicate The value of parameter 'micalg' of 'Content-Type' field is conformant to ETSI TS 119 312 [i.2]
Prescription level Recommended
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_04
TA Id REMS/HEADER/OUT/FIELD/TA_04
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Content-Type
The value for this header field shall be "multipart/signed":
• 'protocol' parameter value shall be "application/pkcs7-signature"
• 'micalg' parameter value should be conformant to ETSI TS 119 312 [i.2]
• 'boundary' parameter value should be conformant to IETF RFC 2046 [i.3], section 5.1.1
Target Conformance to outermost MIME section header
Predicate The value of parameter 'boundary' of 'Content-Type' field is conformant to IETF RFC 2046 [i.3]
Prescription level Recommended
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_05
TA Id REMS/HEADER/OUT/FIELD/TA_05
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Content-Type
Presence Mandatory
Target Conformance to outermost MIME section header
Predicate The 'Content-Type' field of the outermost MIME section header is present
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_06
TA Id REMS/HEADER/OUT/FIELD/TA_06
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
MIME-Version
The value for this header field shall be "1.0"
Target Conformance to outermost MIME section header
Predicate The value of 'MIME-Version' field of the outermost MIME section header is "1.0"
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_07
TA Id REMS/HEADER/OUT/FIELD/TA_07
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
MIME-Version
Presence Mandatory
Target Conformance to outermost MIME section header
Predicate The 'MIME-Version' field of the outermost MIME section header is present
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
ETSI
11 ETSI TS 119 534-1 V1.1.1 (2019-02)
REMS/HEADER/OUT/FIELD/TA_08
TA Id REMS/HEADER/OUT/FIELD/TA_08
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Message-ID
The value for this header field should be an UID as defined in IETF RFC 5322 [4]
Target Conformance to outermost MIME section header
Predicate The value of 'Message-ID' field of the outermost MIME section header is an UID as defined in
IETF RFC 5322 [8]
Prescription level Recommended
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_09
TA Id REMS/HEADER/OUT/FIELD/TA_09
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Message-ID
Presence Mandatory
Target Conformance to outermost MIME section header
Predicate The 'Message-ID' field of the outermost MIME section header is present
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_10
TA Id REMS/HEADER/OUT/FIELD/TA_10
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Date
The value for this header field shall be compliant with clause 3.3 of IETF RFC 5322 [4]
Target Conformance to outermost MIME section header
Predicate The value of 'Date' field of the outermost MIME section header is compliant with clause 3.3 of
IETF RFC 5322 [4]
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_11
TA Id REMS/HEADER/OUT/FIELD/TA_11
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Date
Presence Mandatory
Target Conformance to outermost MIME section header
Predicate The 'Date' field of the outermost MIME section header is present
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_12
TA Id REMS/HEADER/OUT/FIELD/TA_12
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
From
The value for this header field should be either a REMSP service address (e.g.
"" or a transformation of the original From field to show the
role of the REMSP (e.g. "on behalf of user@rem_md_x.com
")
Target Conformance to outermost MIME section header
Predicate The value of 'From' field of the outermost MIME section header is either a REMSP service
address or a transformation of the original 'From' field to show the role of the REMSP
Prescription level Recommended
Tag Conformance, REMS, REMSP, REMS relay metadata
ETSI
12 ETSI TS 119 534-1 V1.1.1 (2019-02)
REMS/HEADER/OUT/FIELD/TA_13
TA Id REMS/HEADER/OUT/FIELD/TA_13
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
From
Presence Mandatory
Target Conformance to outermost MIME section header
Predicate The 'From' field of the outermost MIME section header is present
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_14
TA Id REMS/HEADER/OUT/FIELD/TA_14
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
To
In case of a REM dispatch or REM payload the value for this header field shall match the value of
the 'To' header field in the original message. In case of a REM message carrying evidence for the
sender, the value for this header field may match the value of the 'From' header field in the original
message
Target Conformance to outermost MIME section header
Prerequisite The header is part of a REM Dispatch or REM payload
Predicate The value of 'To' field of the outermost MIME section header matches the value of the To header
field in the original message
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_15
TA Id REMS/HEADER/OUT/FIELD/TA_15
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
To
In case of a REM dispatch the value for this header field shall match the value of the 'To' header
field in the original message. In case of a REM message carrying evidence for the sender, the
value for this header field may match the value of the 'From' header field in the original message
Target Conformance to outermost MIME section header
Prerequisite The header is part of REM message carrying evidence for the sender
Predicate The value of 'To' field of the outermost MIME section header matches the value of the 'From'
header field in the original message
Prescription level Optional
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_16
TA Id REMS/HEADER/OUT/FIELD/TA_16
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
To
Presence Mandatory
Target Conformance to outermost MIME section header
Predicate The 'To' field of the outermost MIME section header is present
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_17
TA Id REMS/HEADER/OUT/FIELD/TA_17
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Cc
REMS should assign a value to this header field only for REM dispatch. In such case, the value
shall match the value of the 'Cc' header field in the original message
Target Conformance to outermost MIME section header
Predicate The value of 'Cc' field of the outermost MIME section header matches the value of the 'Cc' header
field in the original message
Prescription level Optional
Tag Conformance, REMS, REMSP, REMS relay metadata
ETSI
13 ETSI TS 119 534-1 V1.1.1 (2019-02)
REMS/HEADER/OUT/FIELD/TA_18
TA Id REMS/HEADER/OUT/FIELD/TA_18
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Cc
Presence Optional
Target Conformance to outermost MIME section header
Predicate The 'Cc' field of the outermost MIME section header is present
Prescription level Optional
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_19
TA Id REMS/HEADER/OUT/FIELD/TA_19
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Subject
The value for this header field should be transformed as follows starting from the Subject header
field contained in the original sender's message, in order to indicate the role that the REM
message has within the flow:
REM :
(E.g.: "REM ContentConsignment: subject_of_original_message")
Target Conformance to outermost MIME section header
Predicate The value of 'Subject' field of the outermost MIME section header is the result of transforming the
'Subject' field in the original message as follows: REM :
Prescription level Recommended
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_20
TA Id REMS/HEADER/OUT/FIELD/TA_20
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Subject
Presence Mandatory
Target Conformance to outermost MIME section header
Predicate The 'Subject' field of the outermost MIME section header is present
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_21
TA Id REMS/HEADER/OUT/FIELD/TA_21
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
ReplyTo
In the case of a REM dispatch or REM payload the value for this header field shall match the
value of the 'From' header field in the original message. In the case of a REM message carrying
evidence for the sender, this header field should not appear, and if it appears, its value should be
the REM service address
Target Conformance to outermost MIME section header
Prerequisite The header is part of a REM dispatch or REM payload
Predicate The value of 'ReplyTo' field of the outermost MIME section header matches the value of the 'From'
header field in the original message
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
ETSI
14 ETSI TS 119 534-1 V1.1.1 (2019-02)
REMS/HEADER/OUT/FIELD/TA_22
TA Id REMS/HEADER/OUT/FIELD/TA_22
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
ReplyTo
In the case of a REM dispatch or REM payload the value for this header field shall match the
value of the 'From' header field in the original message. In the case of a REM message carrying
evidence for the sender, this header field should not appear, and if it appears, its value should be
the REM service address
Target Conformance to outermost MIME section header
Prerequisite The header is part of a REM message carrying evidence for the sender and the ReplyTo field
appears
Predicate The value of 'ReplyTo' field of the outermost MIME section header is the REM service address
Prescription level Recommended
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_23
TA Id REMS/HEADER/OUT/FIELD/TA_23
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
ReplyTo
Presence Conditional
Target Conformance to outermost MIME section header
Prerequisite The header is part of a REM dispatch or REM payload
Predicate The 'ReplyTo' field of the outermost MIME section header is present
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_24
TA Id REMS/HEADER/OUT/FIELD/TA_24
Normative source ETSI EN 319 532-3 [1],d clause 6.2.1
ReplyTo
Presence Conditional
Target Conformance to outermost MIME section header
Prerequisite The header is part of a REM message carrying evidence for the sender
Predicate The 'ReplyTo' field of the outermost MIME section header is not present
Prescription level Recommended
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_25
TA Id REMS/HEADER/OUT/FIELD/TA_25
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Return-Path
REMS may assign a value to this header field only for REM dispatch. In such case, the value
should match the value of the 'Return-Path' header field in the original messag
Target Conformance to outermost MIME section header
Prerequisite The header is part of a REM dispatch
Predicate The value of 'Return-Path' field of the outermost MIME section header matches the value of the
'Return-Path' header field in the original message
Prescription level Recommended
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_26
TA Id REMS/HEADER/OUT/FIELD/TA_26
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Return-Path
Presence Conditional
Target Conformance to outermost MIME section header
Prerequisite The header is part of a REM dispatch
Predicate The 'Return-Path' field of the outermost MIME section header is present
Prescription level Optional
Tag Conformance, REMS, REMSP, REMS relay metadata
ETSI
15 ETSI TS 119 534-1 V1.1.1 (2019-02)
REMS/HEADER/OUT/FIELD/TA_27
TA Id REMS/HEADER/OUT/FIELD/TA_27
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Received
REMS may assign a value to this header field only for REM dispatch. In such case, the value shall
match the value of the 'Received' header field in the original message
Target Conformance to outermost MIME section header
Prerequisite The header is part of a REM dispatch
Predicate The value of 'Received' field of the outermost MIME section header matches the value of the
'Received' header field in the original message
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_28
TA Id REMS/HEADER/OUT/FIELD/TA_28
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Received
Presence Conditional
Target Conformance to outermost MIME section header
Prerequisite The header is part of a REM dispatch
Predicate The 'Received' field of the outermost MIME section header is present
Prescription level Optional
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_29
TA Id REMS/HEADER/OUT/FIELD/TA_29
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
Received
Presence Conditional
Target Conformance to outermost MIME section header
Prerequisite The header is not part of a REM dispatch
Predicate The 'Received' field of the outermost MIME section header is not present
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_30
TA Id REMS/HEADER/OUT/FIELD/TA_30
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
In-Reply-To
REMS may assign a value to this header field. The value should match the value of the
'In-Reply-To' header field in the original message
Target Conformance to outermost MIME section header
Predicate The value of 'In-Reply-To' field of the outermost MIME section header matches the value of the
'In-Reply-To' header field in the original message
Prescription level Recommended
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_31
TA Id REMS/HEADER/OUT/FIELD/TA_31
Normative source ETSI EN 319 532-3 [1], clause 6.2.1
In-Reply-To
Presence Optional
Target Conformance to outermost MIME section header
Predicate The 'In-Reply-To' field of the outermost MIME section header is present
Prescription level Optional
Tag Conformance, REMS, REMSP, REMS relay metadata
ETSI
16 ETSI TS 119 534-1 V1.1.1 (2019-02)
REMS/HEADER/OUT/FIELD/TA_32
TA Id REMS/HEADER/OUT/FIELD/TA_32
Normative source ETSI EN 319 532-3 [1], clause 6.1
REM-MetadataVersion
This value shall be formatted as defined in ETSI EN 319 522-2 [8], clause 6.2.1 - MD01 and it
shall contain the version number of the present document according to the format
EN31953203 (without the 'V')
Target Conformance to outermost MIME section header
Predicate The value of 'REM-MetadataVersion' field of the outermost MIME section header is formatted as
defined in ETSI EN 319 522-2 [8], clause 6.2.1 - MD01 and it contains the version number of the
applicable version of ETSI EN 319 532-3 [1] according to the format EN31953203
(without the 'V')
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_33
TA Id REMS/HEADER/OUT/FIELD/TA_33
Normative source ETSI EN 319 522-2 [8], clause 6.1 and Table 5
REM-MetadataVersion: Cardinality 1
Target Conformance to outermost MIME section header
Predicate The 'REM-MetadataVersion' field of the outermost MIME section header is present
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_34
TA Id REMS/HEADER/OUT/FIELD/TA_34
Normative source ETSI EN 319 532-3 [1], clause 6.1
REM-RelayDate
The format of this value shall be as defined in ETSI EN 319 522-2 [8], clause 6.2.2 - MD02 and
ETSI EN 319 522-3 [9], clause 4.3.7, and mapped according to clause 3.3 of IETF RFC 5322 [4]
Target Conformance to outermost MIME section header
Predicate The value of 'REM- RelayDate' field of the outermost MIME section header is as defined in ETSI
EN 319 522-2 [8], clause 6.2.2 - MD02 and ETSI EN 319 522-3 [9], clause 4.3.7, and mapped
according to clause 3.3 of IETF RFC 5322 [4]
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_35
TA Id REMS/HEADER/OUT/FIELD/TA_35
Normative source ETSI EN 319 522-2 [8], clause 6.1 and Table 5
REM-RelayDate: cardinality 0-1
Target Conformance to outermost MIME section header
Predicate The 'REM-RelayDate' field of the outermost MIME section header is present
Prescription level Optional
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_36
TA Id REMS/HEADER/OUT/FIELD/TA_36
Normative source ETSI EN 319 532-3 [1], clause 6.1
REM-ExpirationDate
The format of this value shall be as defined in ETSI EN 319 522-2 [8], clause 6.2.3 - MD03 and
ETSI EN 319 522-3 [9], clause 4.3.8. Mapped according to clause 3.3 of IETF RFC 5322 [4]
Target Conformance to outermost MIME section header
Predicate The value of 'REM-RelayDate' field of the outermost MIME section header is as defined in ETSI
EN 319 522-2 [8], clause 6.2.3 - MD03 and ETSI EN 319 522-3 [9], clause 4.3.8. mapped
according to clause 3.3 of IETF RFC 5322 [4]
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
ETSI
17 ETSI TS 119 534-1 V1.1.1 (2019-02)
REMS/HEADER/OUT/FIELD/TA_37
TA Id REMS/HEADER/OUT/FIELD/TA_37
Normative source ETSI EN 319 522-2 [8], clause 6.1 and Table 5
REM-ExpirationDate: cardinality 0-1
Target Conformance to outermost MIME section header
Predicate The 'REM-ExpirationDate' field of the outermost MIME section header is present
Prescription level Optional
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_38
TA Id REMS/HEADER/OUT/FIELD/TA_38
Normative source ETSI EN 319 532-3 [1], clause 6.1
REM-RecipientAssuranceLevel
This value shall be formatted as defined in ETSI EN 319 522-2 [8], clause 6.2.4 - MD04 and ETSI
EN 319 522-3 [9], clause 4.3.14, and mapped in REM according to extension mechanisms defined
in clause 6.2.1 or clause 6.2.5 for structured information (of ETSI EN 319 532-3 [1])
Target Conformance to outermost MIME section header
Predicate The value of 'REM-RecipientAssuranceLevel' field of the outermost MIME section header is as
defined in ETSI EN 319 522-2 [8], clause 6.2.4 - MD04 and ETSI EN 319 522-3 [9], clause 4.3.14,
and mapped in REM according to extension mechanisms defined in clause 6.2.1 or clause 6.2.5
for structured information (of ETSI EN 319 532-3 [1])
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_39
TA Id REMS/HEADER/OUT/FIELD/TA_39
Normative source ETSI EN 319 522-2 [8], clause 6.1 and Table 5
REM-RecipientAssuranceLevel: cardinality 0-1
Target Conformance to outermost MIME section header
Predicate The 'REM-RecipientAssuranceLevel' field of the outermost MIME section header is present
Prescription level Optional
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_40
TA Id REMS/HEADER/OUT/FIELD/TA_40
Normative source ETSI EN 319 532-3 [1], clause 6.1
REM-ApplicablePolicy
This value shall be formatted as defined in ETSI EN 319 522-2 [8], clause 6.2.5 - MD05 and ETSI
EN 319 522-3 [9], clause 4.3.15
Target Conformance to outermost MIME section header
Predicate The value of 'REM-ApplicablePolicy' field of the outermost MIME section header is formatted as
defined in ETSI EN 319 522-2 [8], clause 6.2.5 - MD05 and ETSI EN 319 522-3 [9], clause 4.3.15
Prescription level Mandatory
Tag Conformance, REMS, REMSP, REMS relay metadata
REMS/HEADER/OUT/FIELD/TA_41
TA Id REMS/HEADER/OUT/FIELD/TA_41
Normative source ETSI EN 319 522-2 [8], clause 6.1 and Table 5
REM-ApplicablePolicy: cardinality 0-n
If there is more than one applicable policy, then the header field shall appear as many times as
needed, and each occurrence shall contain one of the applicable policies
Target Conformance to outermost MIME section header
Predicate The 'REM-
...








Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...