5G; NR; Physical layer procedures for control (3GPP TS 38.213 version 15.9.0 Release 15)

RTS/TSGR-0138213vf90

General Information

Status
Published
Publication Date
13-Apr-2020
Current Stage
12 - Completion
Completion Date
14-Apr-2020
Ref Project

Buy Standard

Standard
ETSI TS 138 213 V15.9.0 (2020-04) - 5G; NR; Physical layer procedures for control (3GPP TS 38.213 version 15.9.0 Release 15)
English language
112 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

ETSI TS 138 213 V15.9.0 (2020-04)






TECHNICAL SPECIFICATION
5G;
NR;
Physical layer procedures for control
(3GPP TS 38.213 version 15.9.0 Release 15)

---------------------- Page: 1 ----------------------
3GPP TS 38.213 version 15.9.0 Release 15 1 ETSI TS 138 213 V15.9.0 (2020-04)



Reference
RTS/TSGR-0138213vf90
Keywords
5G
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2020.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 38.213 version 15.9.0 Release 15 2 ETSI TS 138 213 V15.9.0 (2020-04)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Legal Notice
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities. These shall be
interpreted as being references to the corresponding ETSI deliverables.
The cross reference between 3GPP and ETSI identities can be found under http://webapp.etsi.org/key/queryform.asp.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 38.213 version 15.9.0 Release 15 3 ETSI TS 138 213 V15.9.0 (2020-04)
Contents
Intellectual Property Rights . 2
Legal Notice . 2
Modal verbs terminology . 2
Foreword . 5
1 Scope . 6
2 References . 6
3 Definitions, symbols and abbreviations . 6
3.1 Definitions . 6
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Synchronization procedures . 9
4.1 Cell search . 9
4.2 Transmission timing adjustments . 10
4.3 Timing for secondary cell activation / deactivation. 11
5 Radio link monitoring . 12
6 Link recovery procedures . 13
7 Uplink Power control . 14
7.1 Physical uplink shared channel . 14
7.1.1 UE behaviour . 15
7.2 Physical uplink control channel . 20
7.2.1 UE behaviour . 20
7.3 Sounding reference signals . 25
7.3.1 UE behaviour . 25
7.4 Physical random access channel . 27
7.5 Prioritizations for transmission power reductions . 28
7.6 Dual connectivity . 28
7.6.1 EN-DC . 28
7.6.1A NE-DC . 29
7.6.2 NR-DC . 30
7.7 Power headroom report . 30
7.7.1 Type 1 PH report . 31
7.7.2 Type 2 PH report . 32
7.7.3 Type 3 PH report . 32
8 Random access procedure . 33
8.1 Random access preamble . 33
8.2 Random access response . 35
8.3 PUSCH scheduled by RAR UL grant. 37
8.4 PDSCH with UE contention resolution identity . 38
9 UE procedure for reporting control information . 39
9.1 HARQ-ACK codebook determination . 40
9.1.1 CBG-based HARQ-ACK codebook determination . 40
9.1.2 Type-1 HARQ-ACK codebook determination . 41
9.1.2.1 Type-1 HARQ-ACK codebook in physical uplink control channel . 41
9.1.2.2 Type-1 HARQ-ACK codebook in physical uplink shared channel. 46
9.1.3 Type-2 HARQ-ACK codebook determination . 47
9.1.3.1 Type-2 HARQ-ACK codebook in physical uplink control channel . 47
9.1.3.2 Type-2 HARQ-ACK codebook in physical uplink shared channel. 52
9.2 UCI reporting in physical uplink control channel . 53
9.2.1 PUCCH Resource Sets. 53
9.2.2 PUCCH Formats for UCI transmission . 55
9.2.3 UE procedure for reporting HARQ-ACK . 56
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 38.213 version 15.9.0 Release 15 4 ETSI TS 138 213 V15.9.0 (2020-04)
9.2.4 UE procedure for reporting SR . 59
9.2.5 UE procedure for reporting multiple UCI types . 59
9.2.5.1 UE procedure for multiplexing HARQ-ACK or CSI and SR in a PUCCH . 64
9.2.5.2 UE procedure for multiplexing HARQ-ACK/SR/CSI in a PUCCH . 65
9.2.6 PUCCH repetition procedure . 69
9.3 UCI reporting in physical uplink shared channel . 70
10 UE procedure for receiving control information . 74
10.1 UE procedure for determining physical downlink control channel assignment . 75
10.2 PDCCH validation for DL SPS and UL grant Type 2 . 84
11 UE-group common signalling . . 85
11.1 Slot configuration . 85
11.1.1 UE procedure for determining slot format . 88
11.2 Interrupted transmission indication . 94
11.3 Group TPC commands for PUCCH/PUSCH . 95
11.4 SRS switching . 96
12 Bandwidth part operation . 96
13 UE procedure for monitoring Type0-PDCCH CSS sets . 99
Annex A: Change history . 109
History . 111


ETSI

---------------------- Page: 5 ----------------------
3GPP TS 38.213 version 15.9.0 Release 15 5 ETSI TS 138 213 V15.9.0 (2020-04)
Foreword
This Technical Specification has been produced by the 3rd Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.

ETSI

---------------------- Page: 6 ----------------------
3GPP TS 38.213 version 15.9.0 Release 15 6 ETSI TS 138 213 V15.9.0 (2020-04)
1 Scope
The present document specifies and establishes the characteristics of the physical layer procedures for control
operations in 5G-NR.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
[1] 3GPP TR 21.905: "Vocabulary for 3GPP Specifications"
[2] 3GPP TS 38.201: "NR; Physical Layer – General Description"
[3] 3GPP TS 38.202: "NR; Services provided by the physical layer"
[4] 3GPP TS 38.211: "NR; Physical channels and modulation"
[5] 3GPP TS 38.212: "NR; Multiplexing and channel coding"
[6] 3GPP TS 38.214: "NR; Physical layer procedures for data"
[7] 3GPP TS 38.215: "NR; Physical layer measurements"
[8-1] 3GPP TS 38.101-1: "NR; User Equipment (UE) radio transmission and reception; Part 1: Range 1
Standalone"
[8-2] 3GPP TS 38.101-2: "NR; User Equipment (UE) radio transmission and reception; Part 2: Range 2
Standalone"
[8-3] 3GPP TS 38.101-3: "NR; User Equipment (UE) radio transmission and reception; Part 3: Range 1
and Range 2 Interworking operation with other radios"
[9] 3GPP TS 38.104: "NR; Base Station (BS) radio transmission and reception"
[10] 3GPP TS 38.133: "NR; Requirements for support of radio resource management"
[11] 3GPP TS 38.321: "NR; Medium Access Control (MAC) protocol specification"
[12] 3GPP TS 38.331: "NR; Radio Resource Control (RRC); Protocol specification"
[13] 3GPP TS 36.213: "Evolved Universal Terrestrial Radio Access (E-UTRA); Physical layer
procedures"
[14] 3GPP TS 36.321: "Evolved Universal Terrestrial Radio Access (E-UTRA); Medium Access
Control (MAC) protocol specification"

3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in [1, TR 21.905] and the following apply. A
term defined in the present document takes precedence over the definition of the same term, if any, in [1, TR 21.905]. A
parameter referenced in italics is provided by higher layers.
ETSI

---------------------- Page: 7 ----------------------
3GPP TS 38.213 version 15.9.0 Release 15 7 ETSI TS 138 213 V15.9.0 (2020-04)
3.2 Symbols
For the purposes of the present document, the following symbols apply:
3.3 Abbreviations
For the purposes of the present document, the abbreviations given in TR 21.905 [1] and the following apply. An
abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any,
in [1, TR 21.905].
BPRE Bits per resource element
BWP Bandwidth part
CB Code block
CBG Code block group
CCE Control channel element
CORESET Control resource set
CP Cyclic prefix
CRC Cyclic redundancy check
CSI Channel state information
CSS Common search space
DAI Downlink assignment index
DC Dual connectivity
DCI Downlink control information
DL Downlink
DL-SCH Downlink shared channel
EPRE Energy per resource element
EN-DC E-UTRA NR dual connectivity with MCG using E-UTRA and SCG using NR
FR1 Frequency range 1
FR2 Frequency range 2
GSCN Global synchronization channel number
HARQ-ACK Hybrid automatic repeat request acknowledgement
MCG Master cell group
MCS Modulation and coding scheme
NE-DC E-UTRA NR dual connectivity with MCG using NR and SCG using E-UTRA
NR-DC NR NR dual connectivity
PBCH Physical broadcast channel
PCell Primary cell
PDCCH Physical downlink control channel
PDSCH Physical downlink shared channel
PRACH Physical random access channel
PRB Physical resource block
PRG Physical resource block group
PSCell Primary secondary cell
PSS Primary synchronization signal
PUCCH Physical uplink control channel
PUCCH-SCell PUCCH SCell
PUSCH Physical uplink shared channel
QCL Quasi co-location
RB Resource block
RE Resource element
RLM Radio link monitoring
RRM Radio resource management
RS Reference signal
RSRP Reference signal received power
SCG Secondary cell group
SCS Subcarrier spacing
SFN System frame number
SLIV Start and length indicator value
SPS Semi-persistent scheduling
SR Scheduling request
SRI SRS resource indicator
ETSI

---------------------- Page: 8 ----------------------
3GPP TS 38.213 version 15.9.0 Release 15 8 ETSI TS 138 213 V15.9.0 (2020-04)
SRS Sounding reference signal
SSS Secondary synchronization signal
TA Timing advance
TAG Timing advance group
TCI Transmission Configuration Indicator
UCI Uplink control information
UE User equipment
UL Uplink
UL-SCH Uplink shared channel
USS UE-specific search space

ETSI

---------------------- Page: 9 ----------------------
3GPP TS 38.213 version 15.9.0 Release 15 9 ETSI TS 138 213 V15.9.0 (2020-04)
4 Synchronization procedures
4.1 Cell search
Cell search is the procedure for a UE to acquire time and frequency synchronization with a cell and to detect the
physical layer Cell ID of the cell.
A UE receives the following synchronization signals (SS) in order to perform cell search: the primary synchronization
signal (PSS) and secondary synchronization signal (SSS) as defined in [4, TS 38.211].
A UE assumes that reception occasions of a physical broadcast channel (PBCH), PSS, and SSS are in consecutive
symbols, as defined in [4, TS 38.211], and form a SS/PBCH block. The UE assumes that SSS, PBCH DM-RS, and
PBCH data have same EPRE. The UE may assume that the ratio of PSS EPRE to SSS EPRE in a SS/PBCH block is
either 0 dB or 3 dB. If the UE has not been provided dedicated higher layer parameters, the UE may assume that the
ratio of PDCCH DMRS EPRE to SSS EPRE is within -8 dB and 8 dB when the UE monitors PDCCHs for a DCI
format 1_0 with CRC scrambled by SI-RNTI, P-RNTI, or RA-RNTI.
For a half frame with SS/PBCH blocks, the first symbol indexes for candidate SS/PBCH blocks are determined
according to the SCS of SS/PBCH blocks as follows, where index 0 corresponds to the first symbol of the first slot in a
half-frame.
- Case A - 15 kHz SCS: the first symbols of the candidate SS/PBCH blocks have indexes of . For
{}2, 8 +14 ⋅ n
carrier frequencies smaller than or equal to 3 GHz, n = 0,1. For carrier frequencies within FR1 larger than 3
GHz, n = 0,1, 2, 3 .
- Case B - 30 kHz SCS: the first symbols of the candidate SS/PBCH blocks have indexes {}4, 8, 16, 20 + 28⋅ n . For
carrier frequencies smaller than or equal to 3 GHz, n=0. For carrier frequencies within FR1 larger than 3 GHz,
n = 0,1.
- Case C - 30 kHz SCS: the first symbols of the candidate SS/PBCH blocks have indexes {}2, 8 +14⋅ n .
- For paired spectrum operation
- For carrier frequencies smaller than or equal to 3 GHz, n = 0,1. For carrier frequencies within FR1 larger
than 3 GHz, n = 0,1, 2, 3 .
- For unpaired spectrum operation
- For carrier frequencies smaller than or equal to 2.4 GHz, n = 0,1. For carrier frequencies within FR1
larger than 2.4 GHz, n = 0,1, 2, 3 .
- Case D - 120 kHz SCS: the first symbols of the candidate SS/PBCH blocks have indexes {}4, 8, 16, 20 + 28⋅ n .
n = 0,1, 2, 3, 5, 6, 7, 8,10,11,12,13,15,16,17,18 .
For carrier frequencies within FR2,
- Case E - 240 kHz SCS: the first symbols of the candidate SS/PBCH blocks have indexes
. For carrier frequencies within FR2, n = 0,1, 2, 3, 5, 6, 7, 8 .
{}8, 12, 16, 20, 32, 36, 40, 44 + 56 ⋅ n
From the above cases, if the SCS of SS/PBCH blocks is not provided by ssbSubcarrierSpacing, the applicable cases for
a cell depend on a respective frequency band, as provided in [8-1, TS 38.101-1] and [8-2, TS 38.101-2]. A same case
applies for all SS/PBCH blocks on the cell. If a 30 kHz SS/PBCH block SCS is indicated by ssbSubcarrierSpacing,
Case B applies for frequency bands with only 15 kHz SS/PBCH block SCS as specified in [8-1, TS 38.101-1], and the
case specified for 30 kHz SS/PBCH block SCS in [8-1, TS 38.101-1] applies for frequency bands with 30 kHz
SS/PBCH block SCS or both 15 kHz and 30 kHz SS/PBCH block SCS as specified in [8-1, TS 38.101-1]. For a UE
configured to operate with carrier aggregation over a set of cells in a frequency band of FR2 or with frequency-
contiguous carrier aggregation over a set of cells in a frequency band of FR1, if the UE is provided SCS values by
ssbSubcarrierSpacing for receptions of SS/PBCH blocks on any cells from the set of cells, the UE expects the SCS
values to be same.
ETSI

---------------------- Page: 10 ----------------------
3GPP TS 38.213 version 15.9.0 Release 15 10 ETSI TS 138 213 V15.9.0 (2020-04)
The candidate SS/PBCH blocks in a half frame are indexed in an ascending order in time from 0 to L −1 . A UE
max
determines the 2 LSB bits, for L = 4 , or the 3 LSB bits, for L > 4 , of a SS/PBCH block index per half frame from
max
max
a one-to-one mapping with an index of the DM-RS sequence transmitted in the PBCH. For L = 64 , the UE
max
determines the 3 MSB bits of the SS/PBCH block index per half frame from PBCH payload bits a ,a ,a as
A+5 A+6 A+7
described in [5, TS 38.212].
A UE can be provided per serving cell by ssb-periodicityServingCell a periodicity of the half frames for reception of the
SS/PBCH blocks for the serving cell. If the UE is not configured a periodicity of the half frames for receptions of the
SS/PBCH blocks, the UE assumes a periodicity of a half frame. A UE assumes that the periodicity is same for all
SS/PBCH blocks in the serving cell.
For initial cell selection, a UE may assume that half frames with SS/PBCH blocks occur with a periodicity of 2 frames.
Upon detection of a SS/PBCH block, the UE determines from MIB that a CORESET for Type0-PDCCH CSS set, as
described in Subclause 13, is present if [4, TS 38.211] for FR1 or if for FR2. The UE determines
k ≤ 23 k ≤ 11
SSB SSB
from MIB that a CORESET for Type0-PDCCH CSS set is not present if k > 23 for FR1 or if k >11 for FR2; the
SSB SSB
CORESET for Type0-PDCCH CSS set may be provided by PDCCH-ConfigCommon.
For a serving cell without transmission of SS/PBCH blocks, a UE acquires time and frequency synchronization with the
serving cell based on receptions of SS/PBCH blocks on the PCell, or on the PSCell, of the cell group for the serving
cell.
4.2 Transmission timing adjustments
A UE can be provided a value N of a timing advance offset for a serving cell by n-TimingAdvanceOffset for the
TA,offset
serving cell. If the UE is not provided n-TimingAdvanceOffset for a serving cell, the UE determines a default value
N of the timing advance offset for the serving cell as described in [10, TS 38.133].
TA,offset
If a UE is configured with two UL carriers for a serving cell, a same timing advance offset value N applies to
TA,offset
both carriers.
Upon reception of a timing advance command for a TAG, the UE adjusts uplink timing for PUSCH/SRS/PUCCH
transmission on all the serving cells in the TAG based on a value N that the UE expects to be same for all the
TA,offset
serving cells in the TAG and based on the received timing advance command where the uplink timing for
PUSCH/SRS/PUCCH transmissions is the same for all the serving cells in the TAG.
For a band with synchronous contiguous intra-band EN-DC in a band combination with non-applicable maximum
transmit timing difference requirements as described in Note 1 of Table 7.5.3-1 of [10, TS 38.133], if the UE indicates
ul-TimingAlignmentEUTRA-NR as 'required' and uplink transmission timing based on timing adjustment indication for a
TAG from MCG and a TAG from SCG are determined to be different by the UE, the UE adjusts the transmission
timing for PUSCH/SRS/PUCCH transmission on all serving cells part of the band with the synchronous contiguous
intra-band EN-DC based on timing adjustment indication for a TAG from a serving cell in MCG in the band. The UE is
not expected to transmit a PUSCH/SRS/PUCCH in one CG when the PUSCH/SRS/PUCCH is overlapping in time,
even partially, with random access preamble transmitted in another CG.
μ
For a SCS of 2 ⋅15 kHz, the timing advance command for a TAG indicates the change of the uplink timing relative to
μ
the current uplink timing for the TAG in multiples of 16 ⋅ 64 ⋅T 2 . The start timing of the random access preamble is
c
described in [4, TS 38.211].
In case of random access response, a timing advance command [11, TS 38.321], T , for a TAG indicates N values
A TA
μ
by index values of = 0, 1, 2, ., 3846, where an amount of the time alignment for the TAG with SCS of 2 ⋅15 kHz
T
A
μ
is N = T ⋅16 ⋅ 64 2 . N is defined in [4, TS 38.211] and is relative to the SCS of the first uplink transmission

TA A TA
from the UE after the reception of the random access response.
ETSI

---------------------- Page: 11 ----------------------
3GPP TS 38.213 version 15.9.0 Release 15 11 ETSI TS 138 213 V15.9.0 (2020-04)
In other cases, a timing advance command [11, TS 38.321], T , for a TAG indicates adjustment of a current N
A TA
μ
value, N , to the new N value, N , by index values of T = 0, 1, 2,., 63, where for a SCS of 2 ⋅15 kHz,
TA_old TA TA_new A
μ
N = N +()T −31 ⋅16⋅ 64 2 .
TA_new TA_old A
If a UE has multiple active UL BWPs, as described in Subclause 12, in a same TAG, including UL BWPs in two UL
carrier
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.