ETSI EN 301 908-13 V13.4.1 (2026-09)

Final draft ETSI EN 301 908-13 V13.4.1 (2026-06)

HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard for access to radio spectrum;
Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA)
User Equipment (UE)
2 Final draft ETSI EN 301 908-13 V13.4.1 (2026-06)

Reference
REN/MSG-TFES-1512
Keywords
3G, 3GPP, cellular, digital, E-UTRA, IMT, IMT-
2000, IMT-Advanced, LTE, LTE-Advanced, mobile,
radio, regulation, UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2026.
All rights reserved.
ETSI
3 Final draft ETSI EN 301 908-13 V13.4.1 (2026-06)
Contents
Intellectual Property Rights . 11
Foreword . 11
Modal verbs terminology . 12
Introduction . 12
1 Scope . 13
2 References . 16
2.1 Normative references . 16
2.2 Informative references . 16
3 Definition of terms, symbols and abbreviations . 18
3.1 Terms . 18
3.2 Symbols . 21
3.3 Abbreviations . 23
4 Technical requirements specifications . 25
4.1 Environmental profile . 25
4.2 Conformance requirements . 25
4.2.0 General . 25
4.2.1 Introduction. 25
4.2.2 Transmitter Maximum Output Power . 26
4.2.2.1 Transmitter maximum output power for Single Carrier . 26
4.2.2.1.1 Definition. 26
4.2.2.1.2 Limits . 26
4.2.2.1.3 Conformance . 26
4.2.2.2 Transmitter output power for Carrier Aggregation (DL CA and UL CA) . 26
4.2.2.2.1 Definition. 26
4.2.2.2.2 Limits . 27
4.2.2.2.3 Conformance . 28
4.2.2.3 Transmitter output power for UL-MIMO . 28
4.2.2.3.1 Definition. 28
4.2.2.3.2 Limits . 28
4.2.2.3.3 Conformance . 28
4.2.2.4 Transmitter output power for category NB1 . 29
4.2.2.4.1 Definition. 29
4.2.2.4.2 Limits . 29
4.2.2.4.3 Conformance . 29
4.2.2.5 Transmitter output power for UE category M1 . 29
4.2.2.5.1 Definition. 29
4.2.2.5.2 Limits . 29
4.2.2.5.3 Conformance . 30
4.2.3 Transmitter Spectrum Emission Mask . 30
4.2.3.1 Transmitter spectrum emission mask for Single Carrier . 30
4.2.3.1.1 Definition. 30
4.2.3.1.2 Limits . 30
4.2.3.1.3 Conformance . 31
4.2.3.2 Transmitter spectrum emission mask for Carrier Aggregation (DL CA and UL CA) . 31
4.2.3.2.1 Definition. 31
4.2.3.2.2 Limits . 31
4.2.3.2.3 Conformance . 33
4.2.3.3 Transmitter spectrum emission mask for UL-MIMO . 33
4.2.3.3.1 Definition. 33
4.2.3.3.2 Limits . 34
4.2.3.3.3 Conformance . 34
4.2.3.4 Transmitter spectrum emission mask for Multi-Cluster PUSCH within a component carrier . 34
4.2.3.4.1 Definition. 34
4.2.3.4.2 Limits . 34
ETSI
4 Final draft ETSI EN 301 908-13 V13.4.1 (2026-06)
4.2.3.4.3 Conformance . 34
4.2.3.5 Transmitter spectrum emission mask for category NB1 . 34
4.2.3.5.1 Definition. 34
4.2.3.5.2 Limits . 34
4.2.3.5.3 Conformance . 34
4.2.4 Transmitter Spurious Emissions . 35
4.2.4.1 Transmitter spurious emissions for Single Carrier . 35
4.2.4.1.1 Definition. 35
4.2.4.1.2 Limits . 35
4.2.4.1.3 Conformance . 39
4.2.4.2 Transmitter spurious emissions for Carrier Aggregation (DL CA and UL CA) . 39
4.2.4.2.1 Definition. 39
4.2.4.2.2 Limits . 39
4.2.4.2.3 Conformance . 44
4.2.4.3 Transmitter spurious emissions for UL-MIMO . 44
4.2.4.3.1 Definition. 44
4.2.4.3.2 Limits . 45
4.2.4.3.3 Conformance . 45
4.2.4.4 Transmitter spurious emissions for Multi-Cluster PUSCH within a component carrier . 45
4.2.4.4.1 Definition. 45
4.2.4.4.2 Limits . 45
4.2.4.4.3 Conformance . 45
4.2.4.5 Transmitter spurious emissions for category NB1 . 45
4.2.4.5.1 Definition. 45
4.2.4.5.2 Limits . 45
4.2.4.5.3 Conformance . 46
4.2.5 Transmitter Minimum Output Power . 46
4.2.5.1 Transmitter minimum output power for Single Carrier. 46
4.2.5.1.1 Definition. 46
4.2.5.1.2 Limits . 46
4.2.5.1.3 Conformance . 46
4.2.5.2 Transmitter minimum output power for Carrier Aggregation (DL CA and UL CA) . 46
4.2.5.2.1 Definition. 46
4.2.5.2.2 Limits . 46
4.2.5.2.3 Conformance . 47
4.2.5.3 Transmitter minimum output power for UL-MIMO . 47
4.2.5.3.1 Definition. 47
4.2.5.3.2 Limits . 47
4.2.5.3.3 Conformance . 47
4.2.5.4 Transmitter minimum output power for category NB1 . 47
4.2.5.4.1 Definition. 47
4.2.5.4.2 Limits . 47
4.2.5.4.3 Conformance . 47
4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 48
4.2.6.1 Receiver Adjacent Channel Selectivity (ACS) for Single Carrier . 48
4.2.6.1.1 Definition. 48
4.2.6.1.2 Limits . 48
4.2.6.1.3 Conformance . 49
4.2.6.2 Receiver Adjacent Channel Selectivity (ACS) for Carrier Aggregation in DL-only bands . 49
4.2.6.2.1 Definition. 49
4.2.6.2.2 Limits . 49
4.2.6.2.3 Conformance . 50
4.2.6.3 Receiver Adjacent Channel Selectivity (ACS) for category NB1 . 50
4.2.6.3.1 Definition. 50
4.2.6.3.2 Limits . 50
4.2.6.3.3 Conformance . 51
4.2.7 Receiver Blocking Characteristics . 51
4.2.7.1 Receiver Blocking Characteristics for Single Carrier . 51
4.2.7.1.1 Definition. 51
4.2.7.1.2 Limits . 51
4.2.7.1.3 Conformance . 53
4.2.7.2 Receiver Blocking Characteristics for Carrier Aggregation in DL-only bands . 53
ETSI
5 Final draft ETSI EN 301 908-13 V13.4.1 (2026-06)
4.2.7.2.1 Definition. 53
4.2.7.2.2 Limits . 53
4.2.7.2.3 Conformance . 56
4.2.7.3 Receiver Blocking Characteristics for category NB1 . 57
4.2.7.3.1 Definition. 57
4.2.7.3.2 Limits . 57
4.2.7.3.3 Conformance . 58
4.2.8 Receiver Spurious Response . 58
4.2.8.1 Receiver Spurious Response for Single Carrier . 58
4.2.8.1.1 Definition. 58
4.2.8.1.2 Limits . 58
4.2.8.1.3 Conformance . 58
4.2.8.2 Receiver Spurious Response for Carrier Aggregation in DL-only bands . 59
4.2.8.2.1 Definition. 59
4.2.8.2.2 Limits . 59
4.2.8.2.3 Conformance . 59
4.2.8.3 Receiver Spurious Response for category NB1 . 59
4.2.8.3.1 Definition. 59
4.2.8.3.2 Limits . 59
4.2.8.3.3 Conformance . 59
4.2.9 Receiver Intermodulation Characteristic . 60
4.2.9.1 Receiver Intermodulation Characteristics for Single Carrier . 60
4.2.9.1.1 Definition. 60
4.2.9.1.2 Limits . 60
4.2.9.1.3 Conformance . 60
4.2.9.2 Receiver Intermodulation Characteristics for Carrier Aggregation in DL-only bands . 61
4.2.9.2.1 Definition. 61
4.2.9.2.2 Limits . 61
4.2.9.2.3 Conformance . 61
4.2.9.3 Receiver Intermodulation Characteristics for category NB1 . 61
4.2.9.3.1 Definition. 61
4.2.9.3.2 Limits . 62
4.2.9.3.3 Conformance . 62
4.2.10 Receiver Spurious Emissions . 62
4.2.10.1 Receiver Spurious Emissions for Single Carrier . 62
4.2.10.1.1 Definition. 62
4.2.10.1.2 Limits . 62
4.2.10.1.3 Conformance . 62
4.2.10.2 Receiver Spurious Emissions in DL-only bands . 62
4.2.10.2.1 Definition. 62
4.2.10.2.2 Limits . 63
4.2.10.2.3 Conformance . 63
4.2.11 Transmitter Adjacent Channel Leakage Power Ratio . 63
4.2.11.1 Transmitter adjacent channel leakage power ratio for Single Carrier . 63
4.2.11.1.1 Definition. 63
4.2.11.1.2 Limits . 63
4.2.11.1.3 Conformance . 64
4.2.11.2 Transmitter adjacent channel leakage power ratio for Carrier Aggregation (DL CA and UL CA). 64
4.2.11.2.1 Definition. 64
4.2.11.2.2 Limits for CA UTRA . 66
4.2.11.2.3 Limits for CA E-UTRA . 67
4.2.11.2.4 Conformance . 67
4.2.11.3 Transmitter adjacent channel leakage power ratio for UL-MIMO . 67
4.2.11.3.1 Definition. 67
4.2.11.3.2 Limits . 68
4.2.11.3.3 Conformance . 69
4.2.11.4 Transmitter adjacent channel leakage power ratio for Multi-Cluster PUSCH within a component
carrier . 69
4.2.11.4.1 Definition. 69
4.2.11.4.2 Limits . 69
4.2.11.4.3 Conformance . 69
4.2.11.5 Transmitter adjacent channel leakage power ratio for category NB1 . 70
ETSI
6 Final draft ETSI EN 301 908-13 V13.4.1 (2026-06)
4.2.11.5.1 Definition. 70
4.2.11.5.2 Limits . 70
4.2.11.5.3 Conformance . 70
4.2.12 Receiver Reference Sensitivity Level . 70
4.2.12.0 General . 70
4.2.12.1 Receiver Reference Sensitivity Level for Single Carrier . 70
4.2.12.1.1 Definition. 70
4.2.12.1.2 Limits . 70
4.2.12.1.3 Conformance . 71
4.2.12.2 Receiver Reference Sensitivity Level for Carrier Aggregation in DL-only bands . 71
4.2.12.2.1 Definition. 71
4.2.12.2.2 Limits . 71
4.2.12.2.3 Conformance . 72
4.2.12.3 Receiver Reference Sensitivity Level for category NB1 . 72
4.2.12.3.1 Definition. 72
4.2.12.3.2 Limits . 73
4.2.12.3.3 Conformance . 73
4.2.12.4 Receiver Reference Sensitivity Level for UE category 0 . 73
4.2.12.4.1 Definition. 73
4.2.12.4.2 Limits . 73
4.2.12.4.3 Conformance . 74
4.2.12.5 Receiver Reference Sensitivity Level for UE category M1 . 74
4.2.12.5.1 Definition. 74
4.2.12.5.2 Limits . 74
4.2.12.5.3 Conformance . 75
4.2.13 Receiver Total Radiated Sensitivity (TRS) . 75
4.2.13.0 Applicability. 75
4.2.13.1 Definition . 75
4.2.13.2 Limits . 76
4.2.13.3 Conformance . 77
4.2.14 Total Radiated Power (TRP) . 77
4.2.14.0 Applicability. 77
4.2.14.1 Definition . 77
4.2.14.2 Limits . 78
5 Testing for compliance with technical requirements . 79
5.1 Environmental conditions for testing . 79
5.2 Void . 79
5.3 Essential radio test suites . 79
5.3.0 General . 79
5.3.1 Transmitter Maximum Output Power . 79
5.3.1.1 Transmitter maximum output power for Single Carrier . 79
5.3.1.1.1 Method of test . 79
5.3.1.1.2 Test requirements . 80
5.3.1.2 Transmitter maximum output power for intra-band contiguous Carrier Aggregation (DL CA and
UL CA) . 80
5.3.1.2.1 Method of test . 80
5.3.1.2.2 Test requirements . 81
5.3.1.2A Transmitter maximum output power for inter-band Carrier Aggregation (DL CA and UL CA) . 81
5.3.1.2A.1 Method of test . 81
5.3.1.2A.2 Test requirements . 82
5.3.1.3 Transmitter maximum output power for UL-MIMO . 82
5.3.1.3.1 Method of test . 82
5.3.1.3.2 Test requirements . 83
5.3.1.4 Transmitter maximum output power for category NB1 . 83
5.3.1.4.1 Method of Test . 83
5.3.1.4.2 Test requirements . 83
5.3.1.5 Transmitter maximum output power for UE category 0 . 84
5.3.1.5.1 Method of test . 84
5.3.1.5.2 Test requirements . 84
5.3.1.6 Transmitter maximum output power for UE category M1 . 84
5.3.1.6.1 Method of test . 84
ETSI
7 Final draft ETSI EN 301 908-13 V13.4.1 (2026-06)
5.3.1.6.2 Test requirements . 85
5.3.2 Transmitter Spectrum Emission Mask . 85
5.3.2.1 Transmitter spectrum emission mask for Single Carrier . 85
5.3.2.1.1 Method of test . 85
5.3.2.1.2 Test requirements . 86
5.3.2.2 Transmitter spectrum emission mask for intra-band contiguous Carrier Aggregation (DL CA and
UL CA) . 86
5.3.2.2.1 Method of test . 86
5.3.2.2.2 Test requirements . 87
5.3.2.2A Transmitter spectrum emission mask for inter-band Carrier Aggregation (DL CA and UL CA) . 87
5.3.2.2A.1 Method of test . 87
5.3.2.2A.2 Test requirements . 88
5.3.2.3 Transmitter spectrum emission mask for UL-MIMO . 88
5.3.2.3.1 Method of test . 88
5.3.2.3.2 Test requirements . 89
5.3.2.4 Transmitter spectrum emission mask for Multi-Cluster PUSCH within a component carrier . 89
5.3.2.4.1 Method of test . 89
5.3.2.4.2 Test requirements . 89
5.3.2.5 Transmitter spectrum emission mask for category NB1 . 90
5.3.2.5.1 Method of test . 90
5.3.2.5.2 Test requirements . 90
5.3.2.6 Transmitter spectrum emission mask for UE category 0 . 91
5.3.2.6.1 Method of test . 91
5.3.2.6.2 Test requirements . 91
5.3.2.7 Transmitter spectrum emission mask for UE category M1 . 91
5.3.2.7.1 Method of test . 91
5.3.2.7.2 Test requirements . 92
5.3.3 Transmitter Spurious Emissions . 92
5.3
...

HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard for access to radio spectrum;
Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA)
User Equipment (UE)
2 ETSI EN 301 908-13 V13.4.1 (2026-09)

Reference
REN/MSG-TFES-1512
Keywords
3G, 3GPP, cellular, digital, E-UTRA, IMT,
IMT-2000, IMT-Advanced, LTE, LTE-Advanced,
mobile, radio, regulation, UMTS

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part of this document may be reproduced in any form, by any means and in any media, without the prior written
authorization of ETSI and except as expressly permitted below.
By way of exception and when the document is a normative deliverable (European Standard (EN),
Technical Specification (TS), Group Specification (GS) or ETSI Standard (ES)), ETSI authorizes to reproduce
and incorporate into products, services and technical documentation only those extracts (e.g. templates) that are strictly
necessary for the technical implementation of the normative deliverable, to ensure compliance with the latter.
Nothing in this notice shall be construed as limiting any mandatory exceptions to copyright provided by applicable law.

© ETSI 2026.
All rights reserved.
ETSI
3 ETSI EN 301 908-13 V13.4.1 (2026-09)
Contents
Intellectual Property Rights . 11
Foreword . 11
Modal verbs terminology . 12
Introduction . 12
1 Scope . 13
2 References . 16
2.1 Normative references . 16
2.2 Informative references . 16
3 Definition of terms, symbols and abbreviations . 18
3.1 Terms . 18
3.2 Symbols . 21
3.3 Abbreviations . 23
4 Technical requirements specifications . 25
4.1 Environmental profile . 25
4.2 Conformance requirements . 25
4.2.0 General . 25
4.2.1 Introduction. 25
4.2.2 Transmitter Maximum Output Power . 26
4.2.2.1 Transmitter maximum output power for Single Carrier . 26
4.2.2.1.1 Definition. 26
4.2.2.1.2 Limits . 26
4.2.2.1.3 Conformance . 26
4.2.2.2 Transmitter output power for Carrier Aggregation (DL CA and UL CA) . 26
4.2.2.2.1 Definition. 26
4.2.2.2.2 Limits . 27
4.2.2.2.3 Conformance . 28
4.2.2.3 Transmitter output power for UL-MIMO . 28
4.2.2.3.1 Definition. 28
4.2.2.3.2 Limits . 28
4.2.2.3.3 Conformance . 28
4.2.2.4 Transmitter output power for category NB1 . 29
4.2.2.4.1 Definition. 29
4.2.2.4.2 Limits . 29
4.2.2.4.3 Conformance . 29
4.2.2.5 Transmitter output power for UE category M1 . 29
4.2.2.5.1 Definition. 29
4.2.2.5.2 Limits . 29
4.2.2.5.3 Conformance . 30
4.2.3 Transmitter Spectrum Emission Mask . 30
4.2.3.1 Transmitter spectrum emission mask for Single Carrier . 30
4.2.3.1.1 Definition. 30
4.2.3.1.2 Limits . 30
4.2.3.1.3 Conformance . 31
4.2.3.2 Transmitter spectrum emission mask for Carrier Aggregation (DL CA and UL CA) . 31
4.2.3.2.1 Definition. 31
4.2.3.2.2 Limits . 31
4.2.3.2.3 Conformance . 33
4.2.3.3 Transmitter spectrum emission mask for UL-MIMO . 33
4.2.3.3.1 Definition. 33
4.2.3.3.2 Limits . 34
4.2.3.3.3 Conformance . 34
4.2.3.4 Transmitter spectrum emission mask for Multi-Cluster PUSCH within a component carrier . 34
4.2.3.4.1 Definition. 34
4.2.3.4.2 Limits . 34
ETSI
4 ETSI EN 301 908-13 V13.4.1 (2026-09)
4.2.3.4.3 Conformance . 34
4.2.3.5 Transmitter spectrum emission mask for category NB1 . 34
4.2.3.5.1 Definition. 34
4.2.3.5.2 Limits . 34
4.2.3.5.3 Conformance . 34
4.2.4 Transmitter Spurious Emissions . 35
4.2.4.1 Transmitter spurious emissions for Single Carrier . 35
4.2.4.1.1 Definition. 35
4.2.4.1.2 Limits . 35
4.2.4.1.3 Conformance . 39
4.2.4.2 Transmitter spurious emissions for Carrier Aggregation (DL CA and UL CA) . 39
4.2.4.2.1 Definition. 39
4.2.4.2.2 Limits . 39
4.2.4.2.3 Conformance . 44
4.2.4.3 Transmitter spurious emissions for UL-MIMO . 44
4.2.4.3.1 Definition. 44
4.2.4.3.2 Limits . 45
4.2.4.3.3 Conformance . 45
4.2.4.4 Transmitter spurious emissions for Multi-Cluster PUSCH within a component carrier . 45
4.2.4.4.1 Definition. 45
4.2.4.4.2 Limits . 45
4.2.4.4.3 Conformance . 45
4.2.4.5 Transmitter spurious emissions for category NB1 . 45
4.2.4.5.1 Definition. 45
4.2.4.5.2 Limits . 45
4.2.4.5.3 Conformance . 46
4.2.5 Transmitter Minimum Output Power . 46
4.2.5.1 Transmitter minimum output power for Single Carrier. 46
4.2.5.1.1 Definition. 46
4.2.5.1.2 Limits . 46
4.2.5.1.3 Conformance . 46
4.2.5.2 Transmitter minimum output power for Carrier Aggregation (DL CA and UL CA) . 46
4.2.5.2.1 Definition. 46
4.2.5.2.2 Limits . 46
4.2.5.2.3 Conformance . 47
4.2.5.3 Transmitter minimum output power for UL-MIMO . 47
4.2.5.3.1 Definition. 47
4.2.5.3.2 Limits . 47
4.2.5.3.3 Conformance . 47
4.2.5.4 Transmitter minimum output power for category NB1 . 47
4.2.5.4.1 Definition. 47
4.2.5.4.2 Limits . 47
4.2.5.4.3 Conformance . 47
4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 48
4.2.6.1 Receiver Adjacent Channel Selectivity (ACS) for Single Carrier . 48
4.2.6.1.1 Definition. 48
4.2.6.1.2 Limits . 48
4.2.6.1.3 Conformance . 49
4.2.6.2 Receiver Adjacent Channel Selectivity (ACS) for Carrier Aggregation in DL-only bands . 49
4.2.6.2.1 Definition. 49
4.2.6.2.2 Limits . 49
4.2.6.2.3 Conformance . 50
4.2.6.3 Receiver Adjacent Channel Selectivity (ACS) for category NB1 . 50
4.2.6.3.1 Definition. 50
4.2.6.3.2 Limits . 50
4.2.6.3.3 Conformance . 51
4.2.7 Receiver Blocking Characteristics . 51
4.2.7.1 Receiver Blocking Characteristics for Single Carrier . 51
4.2.7.1.1 Definition. 51
4.2.7.1.2 Limits . 51
4.2.7.1.3 Conformance . 53
4.2.7.2 Receiver Blocking Characteristics for Carrier Aggregation in DL-only bands . 53
ETSI
5 ETSI EN 301 908-13 V13.4.1 (2026-09)
4.2.7.2.1 Definition. 53
4.2.7.2.2 Limits . 53
4.2.7.2.3 Conformance . 56
4.2.7.3 Receiver Blocking Characteristics for category NB1 . 57
4.2.7.3.1 Definition. 57
4.2.7.3.2 Limits . 57
4.2.7.3.3 Conformance . 58
4.2.8 Receiver Spurious Response . 58
4.2.8.1 Receiver Spurious Response for Single Carrier . 58
4.2.8.1.1 Definition. 58
4.2.8.1.2 Limits . 58
4.2.8.1.3 Conformance . 58
4.2.8.2 Receiver Spurious Response for Carrier Aggregation in DL-only bands . 59
4.2.8.2.1 Definition. 59
4.2.8.2.2 Limits . 59
4.2.8.2.3 Conformance . 59
4.2.8.3 Receiver Spurious Response for category NB1 . 59
4.2.8.3.1 Definition. 59
4.2.8.3.2 Limits . 59
4.2.8.3.3 Conformance . 59
4.2.9 Receiver Intermodulation Characteristic . 60
4.2.9.1 Receiver Intermodulation Characteristics for Single Carrier . 60
4.2.9.1.1 Definition. 60
4.2.9.1.2 Limits . 60
4.2.9.1.3 Conformance . 60
4.2.9.2 Receiver Intermodulation Characteristics for Carrier Aggregation in DL-only bands . 61
4.2.9.2.1 Definition. 61
4.2.9.2.2 Limits . 61
4.2.9.2.3 Conformance . 61
4.2.9.3 Receiver Intermodulation Characteristics for category NB1 . 61
4.2.9.3.1 Definition. 61
4.2.9.3.2 Limits . 62
4.2.9.3.3 Conformance . 62
4.2.10 Receiver Spurious Emissions . 62
4.2.10.1 Receiver Spurious Emissions for Single Carrier . 62
4.2.10.1.1 Definition. 62
4.2.10.1.2 Limits . 62
4.2.10.1.3 Conformance . 62
4.2.10.2 Receiver Spurious Emissions in DL-only bands . 62
4.2.10.2.1 Definition. 62
4.2.10.2.2 Limits . 63
4.2.10.2.3 Conformance . 63
4.2.11 Transmitter Adjacent Channel Leakage Power Ratio . 63
4.2.11.1 Transmitter adjacent channel leakage power ratio for Single Carrier . 63
4.2.11.1.1 Definition. 63
4.2.11.1.2 Limits . 63
4.2.11.1.3 Conformance . 64
4.2.11.2 Transmitter adjacent channel leakage power ratio for Carrier Aggregation (DL CA and UL CA). 64
4.2.11.2.1 Definition. 64
4.2.11.2.2 Limits for CA UTRA . 66
4.2.11.2.3 Limits for CA E-UTRA . 67
4.2.11.2.4 Conformance . 67
4.2.11.3 Transmitter adjacent channel leakage power ratio for UL-MIMO . 67
4.2.11.3.1 Definition. 67
4.2.11.3.2 Limits . 68
4.2.11.3.3 Conformance . 69
4.2.11.4 Transmitter adjacent channel leakage power ratio for Multi-Cluster PUSCH within a component
carrier . 69
4.2.11.4.1 Definition. 69
4.2.11.4.2 Limits . 69
4.2.11.4.3 Conformance . 69
4.2.11.5 Transmitter adjacent channel leakage power ratio for category NB1 . 70
ETSI
6 ETSI EN 301 908-13 V13.4.1 (2026-09)
4.2.11.5.1 Definition. 70
4.2.11.5.2 Limits . 70
4.2.11.5.3 Conformance . 70
4.2.12 Receiver Reference Sensitivity Level . 70
4.2.12.0 General . 70
4.2.12.1 Receiver Reference Sensitivity Level for Single Carrier . 70
4.2.12.1.1 Definition. 70
4.2.12.1.2 Limits . 70
4.2.12.1.3 Conformance . 71
4.2.12.2 Receiver Reference Sensitivity Level for Carrier Aggregation in DL-only bands . 71
4.2.12.2.1 Definition. 71
4.2.12.2.2 Limits . 71
4.2.12.2.3 Conformance . 72
4.2.12.3 Receiver Reference Sensitivity Level for category NB1 . 72
4.2.12.3.1 Definition. 72
4.2.12.3.2 Limits . 73
4.2.12.3.3 Conformance . 73
4.2.12.4 Receiver Reference Sensitivity Level for UE category 0 . 73
4.2.12.4.1 Definition. 73
4.2.12.4.2 Limits . 73
4.2.12.4.3 Conformance . 74
4.2.12.5 Receiver Reference Sensitivity Level for UE category M1 . 74
4.2.12.5.1 Definition. 74
4.2.12.5.2 Limits . 74
4.2.12.5.3 Conformance . 75
4.2.13 Receiver Total Radiated Sensitivity (TRS) . 75
4.2.13.0 Applicability. 75
4.2.13.1 Definition . 75
4.2.13.2 Limits . 76
4.2.13.3 Conformance . 77
4.2.14 Total Radiated Power (TRP) . 77
4.2.14.0 Applicability. 77
4.2.14.1 Definition . 77
4.2.14.2 Limits . 78
5 Testing for compliance with technical requirements . 79
5.1 Environmental conditions for testing . 79
5.2 Void . 79
5.3 Essential radio test suites . 79
5.3.0 General . 79
5.3.1 Transmitter Maximum Output Power . 79
5.3.1.1 Transmitter maximum output power for Single Carrier . 79
5.3.1.1.1 Method of test . 79
5.3.1.1.2 Test requirements . 80
5.3.1.2 Transmitter maximum output power for intra-band contiguous Carrier Aggregation (DL CA and
UL CA) . 80
5.3.1.2.1 Method of test . 80
5.3.1.2.2 Test requirements . 81
5.3.1.2A Transmitter maximum output power for inter-band Carrier Aggregation (DL CA and UL CA) . 81
5.3.1.2A.1 Method of test . 81
5.3.1.2A.2 Test requirements . 82
5.3.1.3 Transmitter maximum output power for UL-MIMO . 82
5.3.1.3.1 Method of test . 82
5.3.1.3.2 Test requirements . 83
5.3.1.4 Transmitter maximum output power for category NB1 . 83
5.3.1.4.1 Method of Test . 83
5.3.1.4.2 Test requirements . 83
5.3.1.5 Transmitter maximum output power for UE category 0 . 84
5.3.1.5.1 Method of test . 84
5.3.1.5.2 Test requirements . 84
5.3.1.6 Transmitter maximum output power for UE category M1 . 84
5.3.1.6.1 Method of test . 84
ETSI
7 ETSI EN 301 908-13 V13.4.1 (2026-09)
5.3.1.6.2 Test requirements . 85
5.3.2 Transmitter Spectrum Emission Mask . 85
5.3.2.1 Transmitter spectrum emission mask for Single Carrier . 85
5.3.2.1.1 Method of test . 85
5.3.2.1.2 Test requirements . 86
5.3.2.2 Transmitter spectrum emission mask for intra-band contiguous Carrier Aggregation (DL CA and
UL CA) . 86
5.3.2.2.1 Method of test . 86
5.3.2.2.2 Test requirements . 87
5.3.2.2A Transmitter spectrum emission mask for inter-band Carrier Aggregation (DL CA and UL CA) . 87
5.3.2.2A.1 Method of test . 87
5.3.2.2A.2 Test requirements . 88
5.3.2.3 Transmitter spectrum emission mask for UL-MIMO . 88
5.3.2.3.1 Method of test . 88
5.3.2.3.2 Test requirements . 89
5.3.2.4 Transmitter spectrum emission mask for Multi-Cluster PUSCH within a component carrier . 89
5.3.2.4.1 Method of test . 89
5.3.2.4.2 Test requirements . 89
5.3.2.5 Transmitter spectrum emission mask for category NB1 . 90
5.3.2.5.1 Method of test . 90
5.3.2.5.2 Test requirements . 90
5.3.2.6 Transmitter spectrum emission mask for UE category 0 . 91
5.3.2.6.1 Method of test . 91
5.3.2.6.2 Test requirements . 91
5.3.2.7 Transmitter spectrum emission mask for UE category M1 . 91
5.3.2.7.1 Method of test . 91
5.3.2.7.2 Test r
...

SLOVENSKI STANDARD
oSIST prEN 301 908-13 V13.4.1:2026
01-julij-2026
Celična omrežja IMT - Harmonizirani standard za dostop do radijskega spektra -
13. del: Uporabniška oprema za razviti prizemni radijski dostop za UMTS (E-UTRA)
IMT cellular networks - Harmonised Standard for access to radio spectrum - Part 13:
Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)
Ta slovenski standard je istoveten z: ETSI EN 301 908-13 V13.4.1 (2026-06)
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.070.99 Druge mobilne storitve Other mobile services
oSIST prEN 301 908-13 V13.4.1:2026 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 301 908-13 V13.4.1:2026

oSIST prEN 301 908-13 V13.4.1:2026
Final draft ETSI EN 301 908-13 V13.4.1 (2026-06)

HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard for access to radio spectrum;
Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA)
User Equipment (UE)
oSIST prEN 301 908-13 V13.4.1:2026
2 Final draft ETSI EN 301 908-13 V13.4.1 (2026-06)

Reference
REN/MSG-TFES-1512
Keywords
3G, 3GPP, cellular, digital, E-UTRA, IMT, IMT-
2000, IMT-Advanced, LTE, LTE-Advanced, mobile,
radio, regulation, UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2026.
All rights reserved.
ETSI
oSIST prEN 301 908-13 V13.4.1:2026
3 Final draft ETSI EN 301 908-13 V13.4.1 (2026-06)
Contents
Intellectual Property Rights . 11
Foreword . 11
Modal verbs terminology . 12
Introduction . 12
1 Scope . 13
2 References . 16
2.1 Normative references . 16
2.2 Informative references . 16
3 Definition of terms, symbols and abbreviations . 18
3.1 Terms . 18
3.2 Symbols . 21
3.3 Abbreviations . 23
4 Technical requirements specifications . 25
4.1 Environmental profile . 25
4.2 Conformance requirements . 25
4.2.0 General . 25
4.2.1 Introduction. 25
4.2.2 Transmitter Maximum Output Power . 26
4.2.2.1 Transmitter maximum output power for Single Carrier . 26
4.2.2.1.1 Definition. 26
4.2.2.1.2 Limits . 26
4.2.2.1.3 Conformance . 26
4.2.2.2 Transmitter output power for Carrier Aggregation (DL CA and UL CA) . 26
4.2.2.2.1 Definition. 26
4.2.2.2.2 Limits . 27
4.2.2.2.3 Conformance . 28
4.2.2.3 Transmitter output power for UL-MIMO . 28
4.2.2.3.1 Definition. 28
4.2.2.3.2 Limits . 28
4.2.2.3.3 Conformance . 28
4.2.2.4 Transmitter output power for category NB1 . 29
4.2.2.4.1 Definition. 29
4.2.2.4.2 Limits . 29
4.2.2.4.3 Conformance . 29
4.2.2.5 Transmitter output power for UE category M1 . 29
4.2.2.5.1 Definition. 29
4.2.2.5.2 Limits . 29
4.2.2.5.3 Conformance . 30
4.2.3 Transmitter Spectrum Emission Mask . 30
4.2.3.1 Transmitter spectrum emission mask for Single Carrier . 30
4.2.3.1.1 Definition. 30
4.2.3.1.2 Limits . 30
4.2.3.1.3 Conformance . 31
4.2.3.2 Transmitter spectrum emission mask for Carrier Aggregation (DL CA and UL CA) . 31
4.2.3.2.1 Definition. 31
4.2.3.2.2 Limits . 31
4.2.3.2.3 Conformance . 33
4.2.3.3 Transmitter spectrum emission mask for UL-MIMO . 33
4.2.3.3.1 Definition. 33
4.2.3.3.2 Limits . 34
4.2.3.3.3 Conformance . 34
4.2.3.4 Transmitter spectrum emission mask for Multi-Cluster PUSCH within a component carrier . 34
4.2.3.4.1 Definition. 34
4.2.3.4.2 Limits . 34
ETSI
oSIST prEN 301 908-13 V13.4.1:2026
4 Final draft ETSI EN 301 908-13 V13.4.1 (2026-06)
4.2.3.4.3 Conformance . 34
4.2.3.5 Transmitter spectrum emission mask for category NB1 . 34
4.2.3.5.1 Definition. 34
4.2.3.5.2 Limits . 34
4.2.3.5.3 Conformance . 34
4.2.4 Transmitter Spurious Emissions . 35
4.2.4.1 Transmitter spurious emissions for Single Carrier . 35
4.2.4.1.1 Definition. 35
4.2.4.1.2 Limits . 35
4.2.4.1.3 Conformance . 39
4.2.4.2 Transmitter spurious emissions for Carrier Aggregation (DL CA and UL CA) . 39
4.2.4.2.1 Definition. 39
4.2.4.2.2 Limits . 39
4.2.4.2.3 Conformance . 44
4.2.4.3 Transmitter spurious emissions for UL-MIMO . 44
4.2.4.3.1 Definition. 44
4.2.4.3.2 Limits . 45
4.2.4.3.3 Conformance . 45
4.2.4.4 Transmitter spurious emissions for Multi-Cluster PUSCH within a component carrier . 45
4.2.4.4.1 Definition. 45
4.2.4.4.2 Limits . 45
4.2.4.4.3 Conformance . 45
4.2.4.5 Transmitter spurious emissions for category NB1 . 45
4.2.4.5.1 Definition. 45
4.2.4.5.2 Limits . 45
4.2.4.5.3 Conformance . 46
4.2.5 Transmitter Minimum Output Power . 46
4.2.5.1 Transmitter minimum output power for Single Carrier. 46
4.2.5.1.1 Definition. 46
4.2.5.1.2 Limits . 46
4.2.5.1.3 Conformance . 46
4.2.5.2 Transmitter minimum output power for Carrier Aggregation (DL CA and UL CA) . 46
4.2.5.2.1 Definition. 46
4.2.5.2.2 Limits . 46
4.2.5.2.3 Conformance . 47
4.2.5.3 Transmitter minimum output power for UL-MIMO . 47
4.2.5.3.1 Definition. 47
4.2.5.3.2 Limits . 47
4.2.5.3.3 Conformance . 47
4.2.5.4 Transmitter minimum output power for category NB1 . 47
4.2.5.4.1 Definition. 47
4.2.5.4.2 Limits . 47
4.2.5.4.3 Conformance . 47
4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 48
4.2.6.1 Receiver Adjacent Channel Selectivity (ACS) for Single Carrier . 48
4.2.6.1.1 Definition. 48
4.2.6.1.2 Limits . 48
4.2.6.1.3 Conformance . 49
4.2.6.2 Receiver Adjacent Channel Selectivity (ACS) for Carrier Aggregation in DL-only bands . 49
4.2.6.2.1 Definition. 49
4.2.6.2.2 Limits . 49
4.2.6.2.3 Conformance . 50
4.2.6.3 Receiver Adjacent Channel Selectivity (ACS) for category NB1 . 50
4.2.6.3.1 Definition. 50
4.2.6.3.2 Limits . 50
4.2.6.3.3 Conformance . 51
4.2.7 Receiver Blocking Characteristics . 51
4.2.7.1 Receiver Blocking Characteristics for Single Carrier . 51
4.2.7.1.1 Definition. 51
4.2.7.1.2 Limits . 51
4.2.7.1.3 Conformance . 53
4.2.7.2 Receiver Blocking Characteristics for Carrier Aggregation in DL-only bands . 53
ETSI
oSIST prEN 301 908-13 V13.4.1:2026
5 Final draft ETSI EN 301 908-13 V13.4.1 (2026-06)
4.2.7.2.1 Definition. 53
4.2.7.2.2 Limits . 53
4.2.7.2.3 Conformance . 56
4.2.7.3 Receiver Blocking Characteristics for category NB1 . 57
4.2.7.3.1 Definition. 57
4.2.7.3.2 Limits . 57
4.2.7.3.3 Conformance . 58
4.2.8 Receiver Spurious Response . 58
4.2.8.1 Receiver Spurious Response for Single Carrier . 58
4.2.8.1.1 Definition. 58
4.2.8.1.2 Limits . 58
4.2.8.1.3 Conformance . 58
4.2.8.2 Receiver Spurious Response for Carrier Aggregation in DL-only bands . 59
4.2.8.2.1 Definition. 59
4.2.8.2.2 Limits . 59
4.2.8.2.3 Conformance . 59
4.2.8.3 Receiver Spurious Response for category NB1 . 59
4.2.8.3.1 Definition. 59
4.2.8.3.2 Limits . 59
4.2.8.3.3 Conformance . 59
4.2.9 Receiver Intermodulation Characteristic . 60
4.2.9.1 Receiver Intermodulation Characteristics for Single Carrier . 60
4.2.9.1.1 Definition. 60
4.2.9.1.2 Limits . 60
4.2.9.1.3 Conformance . 60
4.2.9.2 Receiver Intermodulation Characteristics for Carrier Aggregation in DL-only bands . 61
4.2.9.2.1 Definition. 61
4.2.9.2.2 Limits . 61
4.2.9.2.3 Conformance . 61
4.2.9.3 Receiver Intermodulation Characteristics for category NB1 . 61
4.2.9.3.1 Definition. 61
4.2.9.3.2 Limits . 62
4.2.9.3.3 Conformance . 62
4.2.10 Receiver Spurious Emissions . 62
4.2.10.1 Receiver Spurious Emissions for Single Carrier . 62
4.2.10.1.1 Definition. 62
4.2.10.1.2 Limits . 62
4.2.10.1.3 Conformance . 62
4.2.10.2 Receiver Spurious Emissions in DL-only bands . 62
4.2.10.2.1 Definition. 62
4.2.10.2.2 Limits . 63
4.2.10.2.3 Conformance . 63
4.2.11 Transmitter Adjacent Channel Leakage Power Ratio . 63
4.2.11.1 Transmitter adjacent channel leakage power ratio for Single Carrier . 63
4.2.11.1.1 Definition. 63
4.2.11.1.2 Limits . 63
4.2.11.1.3 Conformance . 64
4.2.11.2 Transmitter adjacent channel leakage power ratio for Carrier Aggregation (DL CA and UL CA). 64
4.2.11.2.1 Definition. 64
4.2.11.2.2 Limits for CA UTRA . 66
4.2.11.2.3 Limits for CA E-UTRA . 67
4.2.11.2.4 Conformance . 67
4.2.11.3 Transmitter adjacent channel leakage power ratio for UL-MIMO . 67
4.2.11.3.1 Definition. 67
4.2.11.3.2 Limits . 68
4.2.11.3.3 Conformance . 69
4.2.11.4 Transmitter adjacent channel leakage power ratio for Multi-Cluster PUSCH within a component
carrier . 69
4.2.11.4.1 Definition. 69
4.2.11.4.2 Limits . 69
4.2.11.4.3 Conformance . 69
4.2.11.5 Transmitter adjacent channel leakage power ratio for category NB1 . 70
ETSI
oSIST prEN 301 908-13 V13.4.1:2026
6 Final draft ETSI EN 301 908-13 V13.4.1 (2026-06)
4.2.11.5.1 Definition. 70
4.2.11.5.2 Limits . 70
4.2.11.5.3 Conformance . 70
4.2.12 Receiver Reference Sensitivity Level . 70
4.2.12.0 General . 70
4.2.12.1 Receiver Reference Sensitivity Level for Single Carrier . 70
4.2.12.1.1 Definition. 70
4.2.12.1.2 Limits . 70
4.2.12.1.3 Conformance . 71
4.2.12.2 Receiver Reference Sensitivity Level for Carrier Aggregation in DL-only bands . 71
4.2.12.2.1 Definition. 71
4.2.12.2.2 Limits . 71
4.2.12.2.3 Conformance . 72
4.2.12.3 Receiver Reference Sensitivity Level for category NB1 . 72
4.2.12.3.1 Definition. 72
4.2.12.3.2 Limits . 73
4.2.12.3.3 Conformance . 73
4.2.12.4 Receiver Reference Sensitivity Level for UE category 0 . 73
4.2.12.4.1 Definition. 73
4.2.12.4.2 Limits . 73
4.2.12.4.3 Conformance . 74
4.2.12.5 Receiver Reference Sensitivity Level for UE category M1 . 74
4.2.12.5.1 Definition. 74
4.2.12.5.2 Limits . 74
4.2.12.5.3 Conformance . 75
4.2.13 Receiver Total Radiated Sensitivity (TRS) . 75
4.2.13.0 Applicability. 75
4.2.13.1 Definition . 75
4.2.13.2 Limits . 76
4.2.13.3 Conformance . 77
4.2.14 Total Radiated Power (TRP) . 77
4.2.14.0 Applicability. 77
4.2.14.1 Definition . 77
4.2.14.2 Limits . 78
5 Testing for compliance with technical requirements . 79
5.1 Environmental conditions for testing . 79
5.2 Void . 79
5.3 Essential radio test suites . 79
5.3.0 General . 79
5.3.1 Transmitter Maximum Output Power . 79
5.3.1.1 Transmitter maximum output power for Single Carrier . 79
5.3.1.1.1 Method of test . 79
5.3.1.1.2 Test requirements . 80
5.3.1.2 Transmitter maximum output power for intra-band contiguous Carrier Aggregation (DL CA and
UL CA) . 80
5.3.1.2.1 Method of test . 80
5.3.1.2.2 Test requirements . 81
5.3.1.2A Transmitter maximum output power for inter-band Carrier Aggregation (DL CA and UL CA) . 81
5.3.1.2A.1 Method of test . 81
5.3.1.2A.2 Test requirements . 82
5.3.1.3 Transmitter maximum output power for UL-MIMO . 82
5.3.1.3.1 Method of test . 82
5.3.1.3.2 Test requirements . 83
5.3.1.4 Transmitter maximum output power for category NB1 . 83
5.3.1.4.1 Method of Test . 83
5.3.1.4.2 Test requirements . 83
5.3.1.5 Transmitter maximum output power for UE category 0 . 84
5.3.1.5.1 Method of test . 84
5.3.1.5.2 Test requirements . 84
5.3.1.6 Transmitter maximum output power for UE category M1 . 84
5.3.1.6.1 Method of test . 84
ETSI
oSIST prEN 301 908-13 V13.4.1:2026
7 Final draft ETSI EN 301 908-13 V13.4.1 (2026-06)
5.3.1.6.2 Test requirements . 85
5.3.2 Transmitter Spectrum Emission Mask . 85
5.3.2.1 Transmitter spectrum emission mask for Single Carrier . 85
5.3.2.1.1 Method of test . 85
5.3.2.1.2 Test requirements . 86
5.3.2.2 Transmitter spectrum emission mask for intra-band contiguous Carrier Aggregation (DL CA and
UL CA) . 86
5.3.2.2.1 Method of test . 86
5.3.2.2.2 Test requirements . 87
5.3.2.2A Transmitter spectrum emission mask for inter-band Carrier Aggregation (DL CA and UL CA) . 87
5.3.2.2A.1 Method of test . 87
5.3.2.2A.2 Test requirements . 88
5.3.2.3 Transmitter spectrum emission mask for UL-MIMO . 88
5.3.2.3.1 Method of test . 88
5.3.2.3.2 Test requirements . 89
5.3.2.4 Transmitter spectrum emission mask for Multi-Cluster PUSCH within a component carrier . 89
5.3.2.4.1 Method of test . 89
5.3.2.4.2 Test requirements . 89
5.3.2.5 Transmitter spectrum emission mask for category NB1 . 90
5.3.2.5.1 Method of test . 90
5.3.2.5.2 Test requirements .
...