ETSI EN 301 511 V12.5.1 (2017-03)

HARMONISED EUROPEAN STANDARD
Global System for Mobile communications (GSM);
Mobile Stations (MS) equipment;
Harmonised Standard covering the essential requirements
of article 3.2 of Directive 2014/53/EU

2 ETSI EN 301 511 V12.5.1 (2017-03)

Reference
REN/MSG-0020-RED
Keywords
cellular, ER-GSM, GSM, mobile, R-GSM
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2017.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI EN 301 511 V12.5.1 (2017-03)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
Introduction . 6
1 Scope . 7
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definitions and abbreviations . 9
3.1 Definitions . 9
3.2 Abbreviations . 10
4 Technical requirements specifications . 10
4.1 Environmental profile . 10
4.2 Conformance requirements . 10
4.2.0 Introduction. 10
4.2.1 Transmitter - Frequency error and phase error . 12
4.2.2 Transmitter - Frequency error under multipath and interference conditions . 12
4.2.3 Transmitter - Frequency error and phase error in HSCSD multislot configuration . 13
4.2.4 Frequency error and phase error in GPRS multislot configuration . 13
4.2.5 Transmitter output power and burst timing . 13
4.2.6 Transmitter - Output RF spectrum . 13
4.2.7 Transmitter output power and burst timing in HSCSD multislot configurations . 13
4.2.8 Transmitter - Output RF spectrum in HSCSD multislot configuration. 13
4.2.9 Transmitter - Output RF spectrum for MS supporting the R-GSM or ER-GSM frequency band . 13
4.2.10 Transmitter output power in GPRS multislot configuration . 13
4.2.11 Output RF spectrum in GPRS multislot configuration . 13
4.2.12 Conducted spurious emissions - MS allocated a channel . 13
4.2.13 Conducted spurious emissions - MS in idle mode . 13
4.2.14 Conducted spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS
allocated a channel . 13
4.2.15 Conducted spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS in
idle mode . 14
4.2.16 Radiated spurious emissions - MS allocated a channel . 14
4.2.17 Radiated spurious emissions - MS in idle mode . 14
4.2.18 Radiated spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS
allocated a channel . 14
4.2.19 Radiated spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS in
idle mode . 14
4.2.20 Receiver Blocking and spurious response - speech channels . 14
4.2.21 Receiver Blocking and spurious response - speech channels for MS supporting the R-GSM or ER-
GSM frequency band . 14
4.2.22 Improved Receiver Blocking and spurious response - speech channels for 8W MS supporting the R-
GSM or ER-GSM frequency band . 14
4.2.23 Improved Receiver Blocking and spurious response - speech channels for 2W MS supporting the R-
GSM or ER-GSM frequency band . 14
4.2.24 Improved Receiver Blocking and spurious response - control channels for 8W MS supporting the R-
GSM or ER-GSM frequency band not supporting speech . 14
4.2.25 Improved Receiver Blocking and spurious response - control channels for 2W MS supporting the R-
GSM or ER-GSM frequency band not supporting speech . 15
4.2.26 Frequency error and Modulation accuracy in EGPRS Configuration . 15
4.2.27 Frequency error under multipath and interference conditions in EGPRS Configuration . 15
4.2.28 EGPRS Transmitter output power . 15
4.2.29 Output RF spectrum in EGPRS configuration . 15
4.2.30 Blocking and spurious response in EGPRS configuration . 15
ETSI
4 ETSI EN 301 511 V12.5.1 (2017-03)
4.2.31 Blocking and spurious response in DLMC configuration . 15
4.2.32 Intermodulation rejection - speech channels . 15
4.2.33 Intermodulation rejection - control channels . 15
4.2.34 Intermodulation rejection - EGPRS . 15
4.2.35 AM suppression - speech channels . 15
4.2.36 AM suppression - control channels . 15
4.2.37 AM suppression - packet channels . 15
4.2.38 Adjacent channel rejection - speech channels (TCH/FS). 16
4.2.39 Adjacent channel rejection - control channels . 16
4.2.40 Adjacent channel rejection - EGPRS . 16
4.2.41 Adjacent channel rejection in DLMC configuration . 16
4.2.42 Reference sensitivity - TCH/FS . 16
4.2.43 Reference sensitivity - FACCH/F . 16
4.2.44 Minimum Input level for Reference Performance - GPRS . 16
4.2.45 Minimum Input level for Reference Performance - EGPRS . 16
4.2.46 Reference sensitivity - TCH/FS for MS supporting the R-GSM or ER-GSM band . 16
5 Testing for compliance with technical requirements . 16
5.1 Environmental conditions for testing . 16
5.2 Interpretation of the measurement results . 17
5.3 Essential radio test suites . 17
5.3.1 Transmitter - Frequency error and phase error . 17
5.3.2 Transmitter - Frequency error under multipath and interference conditions . 17
5.3.3 Transmitter - Frequency error and phase error in HSCSD multislot configuration . 17
5.3.4 Frequency error and phase error in GPRS multislot configuration . 17
5.3.5 Transmitter output power and burst timing . 17
5.3.6 Transmitter - Output RF spectrum . 17
5.3.7 Transmitter output power and burst timing in HSCSD multislot configurations . 17
5.3.8 Transmitter - Output RF spectrum in HSCSD multislot configuration. 17
5.3.9 Transmitter - Output RF spectrum for MS supporting the R-GSM or ER-GSM frequency band . 18
5.3.10 Transmitter output power in GPRS multislot configuration . 18
5.3.11 Output RF spectrum in GPRS multislot configuration . 18
5.3.12 Conducted spurious emissions - MS allocated a channel . 18
5.3.13 Conducted spurious emissions - MS in idle mode . 18
5.3.14 Conducted spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS

allocated a channel . 18
5.3.15 Conducted spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS in
idle mode . 18
5.3.16 Radiated spurious emissions - MS allocated a channel . 18
5.3.17 Radiated spurious emissions - MS in idle mode . 18
5.3.18 Radiated spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS

allocated a channel . 18
5.3.19 Radiated spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS in
idle mode . 18
5.3.20 Receiver Blocking and spurious response - speech channels . 18
5.3.21 Receiver Blocking and spurious response - speech channels for MS supporting the R-GSM or ER-
GSM frequency band . 19
5.3.22 Improved Receiver Blocking and spurious response - speech channels for 8W MS supporting the R-
GSM or ER-GSM frequency band . 19
5.3.23 Improved Receiver Blocking and spurious response - speech channels for 2W MS supporting the R-
GSM or ER-GSM frequency band . 19
5.3.24 Improved Receiver Blocking and spurious response - control channels for 8W MS supporting the R-
GSM or ER-GSM frequency band not supporting speech . 19
5.3.25 Improved Receiver Blocking and spurious response - control channels for 2W MS supporting the R-
GSM or ER-GSM frequency band not supporting speech . 19
5.3.26 Frequency error and Modulation accuracy in EGPRS Configuration . 19
5.3.27 Frequency error under multipath and interference conditions in EGPRS Configuration . 19
5.3.28 EGPRS Transmitter output power . 19
5.3.29 Output RF spectrum in EGPRS configuration . 19
5.3.30 Blocking and spurious response in EGPRS configuration . 19
5.3.31 Blocking and spurious response in DLMC configuration . 19
5.3.32 Intermodulation rejection - speech channels . 20
ETSI
5 ETSI EN 301 511 V12.5.1 (2017-03)
5.3.33 Intermodulation rejection - speech channels . 20
5.3.34 Intermodulation rejection - EGPRS . 20
5.3.35 AM suppression - speech channels . 20
5.3.36 AM suppression - control channels . 20
5.3.37 AM suppression - packet channels . 20
5.3.38 Adjacent channel rejection - speech channels (TCH/FS). 20
5.3.39 Adjacent channel rejection - control channels . 20
5.3.40 Adjacent channel rejection - EGPRS . 20
5.3.41 Adjacent channel rejection in DLMC configuration . 20
5.3.42 Reference sensitivity - TCH/FS . 20
5.3.43 Reference sensitivity - FACCH/F . 20
5.3.44 Minimum Input level for Reference Performance - GPRS . 20
5.3.45 Minimum Input level for Reference Performance - EGPRS . 20
5.3.46 Reference sensitivity - TCH/FS for MS supporting the R-GSM or ER-GSM band . 21
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 22
Annex B (informative): Type of Mobile Stations . 25
Annex C (informative): Additional information . 26
Annex D (informative): Change history . 27
History . 28

ETSI
6 ETSI EN 301 511 V12.5.1 (2017-03)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group
(MSG).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.10] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.9].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
National transposition dates
Date of adoption of this EN: 13 March 2017
Date of latest announcement of this EN (doa): 30 June 2017
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 December 2017
Date of withdrawal of any conflicting National Standard (dow): 31 December 2018

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document is part of a set of standards developed by ETSI that are designed to fit in a modular structure to
cover radio equipment within the scope of the Radio Equipment Directive [i.9]. The present document is produced
following the guidance in ETSI EG 203 336 [i.12] as applicable.
ETSI
7 ETSI EN 301 511 V12.5.1 (2017-03)
1 Scope
The present document specifies technical characteristics and methods of measurements for the following radio
equipment type:
- GSM mobile station.
This radio equipment type is for operation within the Digital cellular telecommunications system in the GSM 900
and/or GSM 1800 frequency bands as shown in table 1, with a channel separation of 200 kHz, utilizing constant
envelope modulation and carrying traffic channels according to the Time Division Multiple Access (TDMA) principle.
Table 1: Frequency bands for GSM 900 and GSM 1800 Mobile Station system
Type TX RX
P-GSM 900 890 MHz to 915 MHz 935 MHz to 960 MHz
GSM 1800
1 710 MHz to 1 785 MHz 1 805 MHz to 1 880 MHz
E-GSM 900
880 MHz to 915 MHz 925 MHz to 960 MHz
R-GSM 900 876 MHz to 915 MHz 921 MHz to 960 MHz
ER-GSM 900 873 MHz to 915 MHz 918 MHz to 960 MHz

The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.9] under the
conditions identified in annex A.
The present document covers the general access requirements for terminal equipment up to and including 3GPP Rel-12.
The general access requirements, applied to the terminal equipment, are for one release only. The present document
does not cover the GPRS Class A mobiles and the ECSD mobiles.
For each test purpose and its corresponding conformance requirement, a reference is given to the test method in
ETSI TS 151 010-1 [2]. The requirements apply at the air interface, which may be stimulated to perform the tests by
additional equipment if necessary.
The measurement uncertainty is described in ETSI TS 151 010-1 [2], annex 5.
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the Radio Equipment Directive [i.9] will apply to equipment within the scope of the
present document.
NOTE 1: A list of such ENs is included on the web site http://www.newapproach.org.
ETSI TS 151 010-1 [2] constitutes the conformance test suite for GSM. The verification of the conformance
requirements in the present document is based on the tests described in this reference. The set of requirements in
ETSI TS 151 010-1 [2] and the set of requirements in the present document need not be identical.
Some requirements only apply to specific types of mobile station (e.g. data tests only apply to mobile stations with a
data facility, tests that only apply to GSM 900 or only to GSM 1800 or to both). The present document indicates the
specific test which should be carried out for each mobile station type.
An active accessory is covered by the present document if it modifies the terminal performance in an aspect which
affects conformance to essential requirements.
NOTE 2: Only active devices are subject to the present document. Accessories may be tested with specific
terminals, and either approved for use with those terminals only, or may possibly be approved for use
with a wider range of terminals, depending on the nature and effect of the accessory.
ETSI
8 ETSI EN 301 511 V12.5.1 (2017-03)
2 References
2.1 Normative references
References are specific, identified by date of publication and/or edition number or version number. Only the cited
version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] Void.
[2] ETSI TS 151 010-1 (V12.8.0) (05-2016): "Digital cellular telecommunications system (Phase 2+);
Mobile Station (MS) conformance specification; Part 1: Conformance specification (3GPP
TS 51.010-1 version 12.8.0 Release 12)".
[3] Void.
[4] ETSI TS 102 933-2 (V2.1.1) (06-2015): "Railway Telecommunications (RT); GSM-R improved
Receiver parameters; Part 2: Radio conformance testing".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TS 102 933-1 (V2.1.1) (06-2015): "Railway Telecommunications (RT); GSM-R improved
Receiver parameters; Part 1: Requirements for radio reception".
[i.2] ETSI ETS 300 905 (V5.3.2) (01-1998): "Digital cellular telecommunications system (Phase 2+)
(GSM); Teleservices supported by a GSM Public Land Mobile Network (PLMN) (GSM 02.03
version 5.3.2)".
[i.3] ETSI TS 122 060 (V4.4.0) (06-2002): "Digital cellular telecommunications system (Phase 2+);
Universal Mobile Telecommunications System (UMTS); General Packet Radio Service (GPRS);
Service description; Stage 1 (3GPP TS 22.060 version 4.4.0 Release 4)".
[i.4] ETSI TS 100 905 (V7.0.0) (08-1999): "Digital cellular telecommunications system (Phase 2+)
(GSM); Teleservices supported by a GSM Public Land Mobile Network (PLMN) (GSM 02.03
version 7.0.0 Release 1998)".
[i.5] ETSI TS 122 003 (V4.3.0) (03-2002): "Digital cellular telecommunications system (Phase 2+)
(GSM); Universal Mobile Telecommunications System (UMTS); Circuit Teleservices supported
by a Public Land Mobile Network (PLMN) (3GPP TS 22.003 version 4.3.0 Release 4)".
[i.6] ETSI TS 101 349 (V8.16.0) (09-2002): "Digital cellular telecommunications system (Phase 2+);
General Packet Radio Service (GPRS); Mobile Station (MS) - Base Station System (BSS)
interface; Radio Link Control/ Medium Access Control (RLC/MAC) protocol (3GPP TS 04.60
version 8.16.0 Release 1999)".
ETSI
9 ETSI EN 301 511 V12.5.1 (2017-03)
[i.7] ETSI TR 100 028 (all parts) (V1.4.1) (12-2001): "Electromagnetic compatibility and Radio
spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment
characteristics".
[i.8] Void.
[i.9] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.10] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of
Directive 2014/53/EU of the European Parliament and of the Council.
[i.11] ETSI TR 100 028-2: "ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM);
Uncertainties in the measurement of mobile radio equipment characteristics Part 2".
[i.12] ETSI EG 203 336: "Electromagnetic compatibility and Radio spectrum Matters (ERM); Guide for
the selection of technical parameters for the production of Harmonised Standards covering
article 3.1(b) and article 3.2 of Directive 2014/53/EU".
[i.13] ETSI TS 100 908 (V8.10.0) (10-2001): "Digital cellular telecommunications system (Phase 2+);
Multiplexing and multiple access on the radio path (3GPP TS 05.02 version 8.10.0 Release 1999)".
[i.14] ETSI TS 145 002 (V4.5.0) (11-2001): "Digital cellular telecommunications system (Phase 2+);
Multiplexing and multiple access on the radio path (3GPP TS 45.002 version 4.5.0 Release 4)".
[i.15] ETSI TS 144 060 (V12.3.0) (01-2015): "Digital cellular telecommunications system (Phase 2+);
General Packet Radio Service (GPRS); Mobile Station (MS) - Base Station System (BSS)
interface; Radio Link Control / Medium Access Control (RLC/MAC) protocol (3GPP TS 44.060
version 12.3.0 Release 12)".
[i.16] ETSI TS 100 910 (V8.20.0) (11-2005): "Digital cellular telecommunications system (Phase 2+);
Radio Transmission and Reception (3GPP TS 05.05 version 8.20.0 Release 1999)".
[i.17] ETSI TS 145 005 (V12.5.0) (04-2015): "Digital cellular telecommunications system (Phase 2+);
Radio transmission and reception (3GPP TS 45.005 version 12.5.0 Release 12)".
[i.18] ETSI TR 121 905 (V12.0.0) (10-2014): "Digital cellular telecommunications system (Phase 2+);
Universal Mobile Telecommunications System (UMTS); LTE; Vocabulary for 3GPP
Specifications (3GPP TR 21.905 version 12.0.0 Release 12)".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ETSI TR 121 905 [i.18] and the following
apply:
EGPRS: any subset of the packet traffic channels PDTCH/MCS-1 to MCS-9 and related control channels
E-GSM: extended GSM 900 band (includes P-GSM band)
environmental profile: range of environmental conditions under which equipment within the scope of the present
document is required to comply with the provisions of the present document
ER-GSM 900: extended Railway GSM 900 band (includes R-GSM band)
GPRS: any subset of the packet traffic channels PDTCH/CS-1 to CS-4 and related control channels
GSM 900: P-GSM, E-GSM and R-GSM band unless otherwise specified,
ETSI
10 ETSI EN 301 511 V12.5.1 (2017-03)
GSM: GSM 400, GSM 900, ER-GSM 900 and DCS 1800 band unless otherwise specified
P-GSM: primary GSM 900 band
R-GSM: Railways GSM 900 band (includes P-GSM band and E-GSM band)
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AM Amplitude Modulation
DLMC Downlink Multi-Carrier
ECSD Enhanced Circuit Switched Data
EGPRS Enhanced GPRS
ER-GSM Extended Railways GSM
GPRS General Packet Radio Service
GSM Global System for Mobile communications
HSCSD High Speed Circuit Switched Data
MS Mobile Station which includes a GSM radio part
RF Radio Frequency
RX Reception
TCH/FS Traffic CHannel for Full rate Speech
TDMA Time Division Multiple Access
TX Transmission
4 Technical requirements specifications
4.1 Environmental profile
The technical requirements of the present document apply under the environmental profile for operation of the
equipment, which shall be declared by the manufacturer. The equipment shall comply with all the technical
requirements of the present document which are identified as applicable in annex A at all times when operating within
the boundary limits of the required operational environmental profile.
4.2 Conformance requirements
4.2.0 Introduction
The present document contains all requirements that are needed for terminals to meet the essential requirement as
defined in the Directive 2014/53/EU [i.9], article 3.2:
- The present document gives normative reference to a clause of ETSI TS 151 010-1 [2] containing the
conformance requirement text and references to the base standard.
To meet the essential requirement under article 3.2 of Directive 2014/53/EU [i.9], a set of essential parameters have
been identified. Table 2 provides a cross reference between these essential parameters and the corresponding technical
requirements for equipment within the scope of the present document.
ETSI
11 ETSI EN 301 511 V12.5.1 (2017-03)
Table 2: Essential parameters and corresponding technical requirements and test suites
Essential parameters Corresponding technical requirements Corresponding
test suites
Transmitter spectrum mask 4.2.6 Transmitter - Output RF spectrum 5.3.6
4.2.7 Transmitter output power and burst timing in 5.3.7
HSCSD multislot configurations
4.2.8 Transmitter - Output RF spectrum in HSCSD 5.3.8
multislot configuration
Transmitter unwanted emissions in the
4.2.9 Transmitter - Output RF spectrum for MS 5.3.9
out of band domain
supporting the R-GSM or ER-GSM frequency band
4.2.11 Output RF spectrum in GPRS multislot 5.3.11
configuration
4.2.29 Output RF spectrum in EGPRS configuration 5.3.29
Transmitter unwanted emissions in the 4.2.12 Conducted spurious emissions - MS allocated a 5.3.12
spurious domain channel
4.2.13 Conducted spurious emissions - MS in idle 5.3.13
mode 5.3.14
4.2.14 Conducted spurious emissions for MS
supporting the R-GSM or ER-GSM frequency band -
MS allocated a channel 5.3.15
4.2.15 Conducted spurious emissions for MS
supporting the R-GSM or ER-GSM frequency band -
MS in idle mode 5.3.16
4.2.16 Radiated spurious emissions - MS allocated a

channel 5.3.17
4.2.17 Radiated spurious emissions - MS in idle mode 5.3.18
4.2.18 Radiated spurious emissions for MS supporting
the R-GSM or ER-GSM frequency band - MS allocated
a channel 5.3.19
4.2.19 Radiated spurious emissions for MS supporting
the R-GSM or ER-GSM frequency band - MS in idle
mode
Transmitter power limits 4.2.5 Transmitter output power and burst timing 5.3.5
4.2.10 Transmitter output power in GPRS multislot
5.3.10
configuration
Transmitter power accuracy
4.2.28 EGPRS Transmitter output power 5.3.28
Transmitter frequency stability 4.2.1 Transmitter - Frequency error and phase error 5.3.1
4.2.2 Transmitter - Frequency error under multipath 5.3.2
and interference conditions
4.2.3 Transmitter - Frequency error and phase error 5.3.3
in HSCSD multislot configuration
4.2.4 Frequency error and phase error in GPRS 5.3.4
multislot configuration
4.2.26 Frequency error and Modulation accuracy in 5.3.26
EGPRS Configuration
4.2.27 Frequency error under multipath and 5.3.27
interference conditions in EGPRS Configuration
ETSI
12 ETSI EN 301 511 V12.5.1 (2017-03)
Essential parameters Corresponding technical requirements Corresponding
test suites
Receiver unwanted emissions in the 4.2.20 Receiver Blocking and spurious response -
5.3.20
spurious domain speech channels
4.2.21 Receiver Blocking and spurious response - 5.3.21
Receiver blocking
Receiver spurious response rejection speech channels for MS supporting the R-GSM or
ER-GSM frequency band
4.2.22 Improved Receiver Blocking and spurious 5.3.22
response - speech channels for 8W MS supporting the
R-GSM or ER-GSM frequency band
4.2.23 Improved Receiver Blocking and spurious 5.3.23
response - speech channels for 2W MS supporting the
R-GSM or ER-GSM frequency band
4.2.24 Improved Receiver Blocking and spurious 5.3.24
response - control channels for 8W MS supporting the
R-GSM or ER-GSM frequency band not supporting
Desensitization
speech
4.2.25 Improved Receiver Blocking and spurious 5.3.25
response - control channels for 2W MS supporting the
R-GSM or ER-GSM frequency band not supporting
speech
4.2.30 Blocking and spurious response in EGPRS 5.3.30
configuration
4.2.31 Blocking and spurious response in DLMC 5.3.31
configuration
Receiver intermodulation 4.2.32 Intermodulation rejection - speech channels 5.3.32
4.2.33 Intermodulation rejection - speech channels 5.3.33
4.2.34 Intermodulation rejection - EGPRS 5.3.34
4.2.35 AM suppression - speech channels 5.3.35
4.2.36 AM suppression - control channels 5.3.36
4.2.37 AM suppression - packet channels 5.3.37
Receiver adjacent channel signal 4.2.38 Adjacent channel rejection - speech channels 5.3.38
selectivity (TCH/FS)
4.2.39 Adjacent channel rejection - control channels 5.3.39
4.2.40 Adjacent channel rejection - EGPRS 5.3.40
4.2.41 Adjacent channel rejection in DLMC 5.3.41
configuration
Receiver sensitivity 4.2.42 Reference sensitivity - TCH/FS 5.3.42
Antenna 4.2.43 Reference sensitivity - FACCH/F 5.3.43
4.2.44 Minimum Input level for Reference Performance 5.3.44
- GPRS
4.2.45 Minimum Input level for Reference Performance 5.3.45
- EGPRS
4.2.46 Reference sensitivity - TCH/FS for MS 5.3.46
supporting the R-GSM or ER-GSM band

Unless otherwise stated, the transmitter and receiver characteristics are specified at the antenna connector(s) of the MS.
For MS(s) with an integral antenna only, a reference antenna(s) with a gain of 0 dBi should be assumed for each
antenna port(s). An MS with integral antenna(s) may be taken into account by converting these power levels into field
strength requirements, assuming a 0 dBi gain antenna.
4.2.1 Transmitter - Frequency error and phase error
Clauses 13.1.1 and 13.1.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.2 Transmitter - Frequency error under multipath and interference
conditions
Clauses 13.2.1 and 13.2.2 of ETSI TS 151 010-1 [2] shall apply.
ETSI
13 ETSI EN 301 511 V12.5.1 (2017-03)
4.2.3 Transmitter - Frequency error and phase error in HSCSD multislot
configuration
Clauses 13.6.1 and 13.6.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.4 Frequency error and phase error in GPRS multislot configuration
Clauses 13.16.1.1 and 13.16.1.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.5 Transmitter output power and burst timing
Clauses 13.3.1 and 13.3.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.6 Transmitter - Output RF spectrum
Clauses 13.4.1 and 13.4.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.7 Transmitter output power and burst timing in HSCSD multislot
configurations
Clauses 13.7.1 and 13.7.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.8 Transmitter - Output RF spectrum in HSCSD multislot configuration
Clauses 13.8.1 and 13.8.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.9 Transmitter - Output RF spectrum for MS supporting the R-GSM or
ER-GSM frequency band
Clauses 13.9.1 and 13.9.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.10 Transmitter output power in GPRS multislot configuration
Clauses 13.16.2.1 and 13.16.2.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.11 Output RF spectrum in GPRS multislot configuration
Clauses 13.16.3.1 and 13.16.3.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.12 Conducted spurious emissions - MS allocated a channel
Clauses 12.1.1.1 and 12.1.1.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.13 Conducted spurious emissions - MS in idle mode
Clauses 12.1.2.1 and 12.1.2.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.14 Conducted spurious emissions for MS supporting the R-GSM or
ER-GSM frequency band - MS allocated a channel
Clauses 12.3.1.1 and 12.3.1.2 of ETSI TS 151 010-1 [2] shall apply.
ETSI
14 ETSI EN 301 511 V12.5.1 (2017-03)
4.2.15 Conducted spurious emissions for MS supporting the R-GSM or
ER-GSM frequency band - MS in idle mode
Clauses 12.3.2.1 and 12.3.2.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.16 Radiated spurious emissions - MS allocated a channel
Clauses 12.2.1.1 and 12.2.1.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.17 Radiated spurious emissions - MS in idle mode
Clauses 12.2.2.1 and 12.2.2.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.18 Radiated spurious emissions for MS supporting the R-GSM or
ER-GSM frequency band - MS allocated a channel
Clauses 12.4.1.1 and 12.4.1.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.19 Radiated spurious emissions for MS supporting the R-GSM or
ER-GSM frequency band - MS in idle mode
Clauses 12.4.2.1 and 12.4.2.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.20 Receiver Blocking and spurious response - speech channels
Clauses 14.7.1.1 and 14.7.1.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.21 Receiver Blocking and spurious response - speech channels for MS
supporting the R-GSM or ER-GSM frequency band
Clauses 14.7.3.1 and 14.7.3.2 of ETSI TS 151 010-1 [2] shall apply.
4.2.22 Improved Receiver Blocking and spurious response - speech
channels for 8W MS supporting the R-GSM or ER-GSM frequency
band
Clauses 4.2.1 and 4.3.1 of ETSI TS 102 933-2 [4] shall apply.
4.2.23 Improved Receiver Blocking and spurious response - speech
channels for 2W MS supporting the R-GSM or ER-GSM frequency
band
Clauses 5.2.1 and 5.3.1 of ETSI TS 102 933-2 [4] shall apply.
4.2.24 Improved Receiver Blocking and spurious response - control
channels for 8W MS supporting the R-GSM or ER-GSM frequency
band not supporting speech
Clauses 4.2.2 and 4.3.2 of ETSI TS 102 933-2 [4] shall ap
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Global System for Mobile communications (GSM) - Mobile Stations (MS) equipment - Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU33.070.50Globalni sistem za mobilno telekomunikacijo (GSM)Global System for Mobile Communication (GSM)ICS:Ta slovenski standard je istoveten z:ETSI EN 301 511 V12.5.1 (2016-12)SIST EN 301 511 V12.5.1:2017en01-maj-2017SIST EN 301 511 V12.5.1:2017SLOVENSKI
STANDARD
HARMONISED EUROPEAN STANDARD SIST EN 301 511 V12.5.1:2017

ETSI ETSI EN 301 511 V12.5.1 (2017-03) 2
Reference REN/MSG-0020-RED Keywords cellular, ER-GSM, GSM, mobile, R-GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2017. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 511 V12.5.1:2017

ETSI ETSI EN 301 511 V12.5.1 (2017-03) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Modal verbs terminology . 6 Introduction . 6 1 Scope . 7 2 References . 8 2.1 Normative references . 8 2.2 Informative references . 8 3 Definitions and abbreviations . 9 3.1 Definitions . 9 3.2 Abbreviations . 10 4 Technical requirements specifications . 10 4.1 Environmental profile . 10 4.2 Conformance requirements . 10 4.2.0 Introduction. 10 4.2.1 Transmitter - Frequency error and phase error . 12 4.2.2 Transmitter - Frequency error under multipath and interference conditions . 12 4.2.3 Transmitter - Frequency error and phase error in HSCSD multislot configuration . 13 4.2.4 Frequency error and phase error in GPRS multislot configuration . 13 4.2.5 Transmitter output power and burst timing . 13 4.2.6 Transmitter - Output RF spectrum . 13 4.2.7 Transmitter output power and burst timing in HSCSD multislot configurations . 13 4.2.8 Transmitter - Output RF spectrum in HSCSD multislot configuration. 13 4.2.9 Transmitter - Output RF spectrum for MS supporting the R-GSM or ER-GSM frequency band . 13 4.2.10 Transmitter output power in GPRS multislot configuration . 13 4.2.11 Output RF spectrum in GPRS multislot configuration . 13 4.2.12 Conducted spurious emissions - MS allocated a channel . 13 4.2.13 Conducted spurious emissions - MS in idle mode . 13 4.2.14 Conducted spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS allocated a channel . 13 4.2.15 Conducted spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS in idle mode . 14 4.2.16 Radiated spurious emissions - MS allocated a channel . 14 4.2.17 Radiated spurious emissions - MS in idle mode . 14 4.2.18 Radiated spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS allocated a channel . 14 4.2.19 Radiated spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS in idle mode . 14 4.2.20 Receiver Blocking and spurious response - speech channels . 14 4.2.21 Receiver Blocking and spurious response - speech channels for MS supporting the R-GSM or ER-GSM frequency band . 14 4.2.22 Improved Receiver Blocking and spurious response - speech channels for 8W MS supporting the R-GSM or ER-GSM frequency band . 14 4.2.23 Improved Receiver Blocking and spurious response - speech channels for 2W MS supporting the R-GSM or ER-GSM frequency band . 14 4.2.24 Improved Receiver Blocking and spurious response - control channels for 8W MS supporting the R-GSM or ER-GSM frequency band not supporting speech . 14 4.2.25 Improved Receiver Blocking and spurious response - control channels for 2W MS supporting the R-GSM or ER-GSM frequency band not supporting speech . 15 4.2.26 Frequency error and Modulation accuracy in EGPRS Configuration . 15 4.2.27 Frequency error under multipath and interference conditions in EGPRS Configuration . 15 4.2.28 EGPRS Transmitter output power . 15 4.2.29 Output RF spectrum in EGPRS configuration . 15 4.2.30 Blocking and spurious response in EGPRS configuration . 15 SIST EN 301 511 V12.5.1:2017

ETSI ETSI EN 301 511 V12.5.1 (2017-03) 4 4.2.31 Blocking and spurious response in DLMC configuration . 15 4.2.32 Intermodulation rejection - speech channels . 15 4.2.33 Intermodulation rejection - control channels . 15 4.2.34 Intermodulation rejection - EGPRS . 15 4.2.35 AM suppression - speech channels . 15 4.2.36 AM suppression - control channels . 15 4.2.37 AM suppression - packet channels . 15 4.2.38 Adjacent channel rejection - speech channels (TCH/FS). 16 4.2.39 Adjacent channel rejection - control channels . 16 4.2.40 Adjacent channel rejection - EGPRS . 16 4.2.41 Adjacent channel rejection in DLMC configuration . 16 4.2.42 Reference sensitivity - TCH/FS . 16 4.2.43 Reference sensitivity - FACCH/F . 16 4.2.44 Minimum Input level for Reference Performance - GPRS . 16 4.2.45 Minimum Input level for Reference Performance - EGPRS . 16 4.2.46 Reference sensitivity - TCH/FS for MS supporting the R-GSM or ER-GSM band . 16 5 Testing for compliance with technical requirements . 16 5.1 Environmental conditions for testing . 16 5.2 Interpretation of the measurement results . 17 5.3 Essential radio test suites . 17 5.3.1 Transmitter - Frequency error and phase error . 17 5.3.2 Transmitter - Frequency error under multipath and interference conditions . 17 5.3.3 Transmitter - Frequency error and phase error in HSCSD multislot configuration . 17 5.3.4 Frequency error and phase error in GPRS multislot configuration . 17 5.3.5 Transmitter output power and burst timing . 17 5.3.6 Transmitter - Output RF spectrum . 17 5.3.7 Transmitter output power and burst timing in HSCSD multislot configurations . 17 5.3.8 Transmitter - Output RF spectrum in HSCSD multislot configuration. 17 5.3.9 Transmitter - Output RF spectrum for MS supporting the R-GSM or ER-GSM frequency band . 18 5.3.10 Transmitter output power in GPRS multislot configuration . 18 5.3.11 Output RF spectrum in GPRS multislot configuration . 18 5.3.12 Conducted spurious emissions - MS allocated a channel . 18 5.3.13 Conducted spurious emissions - MS in idle mode . 18 5.3.14 Conducted spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS allocated a channel . 18 5.3.15 Conducted spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS in idle mode . 18 5.3.16 Radiated spurious emissions - MS allocated a channel . 18 5.3.17 Radiated spurious emissions - MS in idle mode . 18 5.3.18 Radiated spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS allocated a channel . 18 5.3.19 Radiated spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS in idle mode . 18 5.3.20 Receiver Blocking and spurious response - speech channels . 18 5.3.21 Receiver Blocking and spurious response - speech channels for MS supporting the R-GSM or ER-GSM frequency band . 19 5.3.22 Improved Receiver Blocking and spurious response - speech channels for 8W MS supporting the R-GSM or ER-GSM frequency band . 19 5.3.23 Improved Receiver Blocking and spurious response - speech channels for 2W MS supporting the R-GSM or ER-GSM frequency band . 19 5.3.24 Improved Receiver Blocking and spurious response - control channels for 8W MS supporting the R-GSM or ER-GSM frequency band not supporting speech . 19 5.3.25 Improved Receiver Blocking and spurious response - control channels for 2W MS supporting the R-GSM or ER-GSM frequency band not supporting speech . 19 5.3.26 Frequency error and Modulation accuracy in EGPRS Configuration . 19 5.3.27 Frequency error under multipath and interference conditions in EGPRS Configuration . 19 5.3.28 EGPRS Transmitter output power . 19 5.3.29 Output RF spectrum in EGPRS configuration . 19 5.3.30 Blocking and spurious response in EGPRS configuration . 19 5.3.31 Blocking and spurious response in DLMC configuration . 19 5.3.32 Intermodulation rejection - speech channels . 20 SIST EN 301 511 V12.5.1:2017

ETSI ETSI EN 301 511 V12.5.1 (2017-03) 5 5.3.33 Intermodulation rejection - speech channels . 20 5.3.34 Intermodulation rejection - EGPRS . 20 5.3.35 AM suppression - speech channels . 20 5.3.36 AM suppression - control channels . 20 5.3.37 AM suppression - packet channels . 20 5.3.38 Adjacent channel rejection - speech channels (TCH/FS). 20 5.3.39 Adjacent channel rejection - control channels . 20 5.3.40 Adjacent channel rejection - EGPRS . 20 5.3.41 Adjacent channel rejection in DLMC configuration . 20 5.3.42 Reference sensitivity - TCH/FS . 20 5.3.43 Reference sensitivity - FACCH/F . 20 5.3.44 Minimum Input level for Reference Performance - GPRS . 20 5.3.45 Minimum Input level for Reference Performance - EGPRS . 20 5.3.46 Reference sensitivity - TCH/FS for MS supporting the R-GSM or ER-GSM band . 21 Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 22 Annex B (informative): Type of Mobile Stations . 25 Annex C (informative): Additional information . 26 Annex D (informative): Change history . 27 History . 28
ETSI ETSI EN 301 511 V12.5.1 (2017-03) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.10] to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC [i.9]. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations.
National transposition dates Date of adoption of this EN: 13 March 2017 Date of latest announcement of this EN (doa): 30 June 2017 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 December 2017 Date of withdrawal of any conflicting National Standard (dow): 31 December 2018
Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document is part of a set of standards developed by ETSI that are designed to fit in a modular structure to cover radio equipment within the scope of the Radio Equipment Directive [i.9]. The present document is produced following the guidance in ETSI EG 203 336 [i.12] as applicable. SIST EN 301 511 V12.5.1:2017

ETSI ETSI EN 301 511 V12.5.1 (2017-03) 7 1 Scope The present document specifies technical characteristics and methods of measurements for the following radio equipment type: - GSM mobile station. This radio equipment type is for operation within the Digital cellular telecommunications system in the GSM 900 and/or GSM 1800 frequency bands as shown in table 1, with a channel separation of 200 kHz, utilizing constant envelope modulation and carrying traffic channels according to the Time Division Multiple Access (TDMA) principle. Table 1: Frequency bands for GSM 900 and GSM 1800 Mobile Station system Type TX RX P-GSM 900 890 MHz to 915 MHz 935 MHz to 960 MHz GSM 1800 1 710 MHz to 1 785 MHz 1 805 MHz to 1 880 MHz E-GSM 900 880 MHz to 915 MHz 925 MHz to 960 MHz R-GSM 900 876 MHz to 915 MHz 921 MHz to 960 MHz ER-GSM 900 873 MHz to 915 MHz 918 MHz to 960 MHz
The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.9] under the conditions identified in annex A. The present document covers the general access requirements for terminal equipment up to and including 3GPP Rel-12. The general access requirements, applied to the terminal equipment, are for one release only. The present document does not cover the GPRS Class A mobiles and the ECSD mobiles. For each test purpose and its corresponding conformance requirement, a reference is given to the test method in ETSI TS 151 010-1 [2]. The requirements apply at the air interface, which may be stimulated to perform the tests by additional equipment if necessary. The measurement uncertainty is described in ETSI TS 151 010-1 [2], annex 5. In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Radio Equipment Directive [i.9] will apply to equipment within the scope of the present document. NOTE 1: A list of such ENs is included on the web site http://www.newapproach.org. ETSI TS 151 010-1 [2] constitutes the conformance test suite for GSM. The verification of the conformance requirements in the present document is based on the tests described in this reference. The set of requirements in ETSI TS 151 010-1 [2] and the set of requirements in the present document need not be identical. Some requirements only apply to specific types of mobile station (e.g. data tests only apply to mobile stations with a data facility, tests that only apply to GSM 900 or only to GSM 1800 or to both). The present document indicates the specific test which should be carried out for each mobile station type. An active accessory is covered by the present document if it modifies the terminal performance in an aspect which affects conformance to essential requirements. NOTE 2: Only active devices are subject to the present document. Accessories may be tested with specific terminals, and either approved for use with those terminals only, or may possibly be approved for use with a wider range of terminals, depending on the nature and effect of the accessory. SIST EN 301 511 V12.5.1:2017

ETSI ETSI EN 301 511 V12.5.1 (2017-03) 8 2 References 2.1 Normative references References are specific, identified by date of publication and/or edition number or version number. Only the cited version applies. Referenced documents which are not found to be publicly available in the expected location might be found at https://docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. [1] Void. [2] ETSI TS 151 010-1 (V12.8.0) (05-2016): "Digital cellular telecommunications system (Phase 2+); Mobile Station (MS) conformance specification; Part 1: Conformance specification (3GPP TS 51.010-1 version 12.8.0 Release 12)". [3] Void. [4] ETSI TS 102 933-2 (V2.1.1) (06-2015): "Railway Telecommunications (RT); GSM-R improved Receiver parameters; Part 2: Radio conformance testing". 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] ETSI TS 102 933-1 (V2.1.1) (06-2015): "Railway Telecommunications (RT); GSM-R improved Receiver parameters; Part 1: Requirements for radio reception". [i.2] ETSI ETS 300 905 (V5.3.2) (01-1998): "Digital cellular telecommunications system (Phase 2+) (GSM); Teleservices supported by a GSM Public Land Mobile Network (PLMN) (GSM 02.03 version 5.3.2)". [i.3] ETSI TS 122 060 (V4.4.0) (06-2002): "Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); General Packet Radio Service (GPRS); Service description; Stage 1 (3GPP TS 22.060 version 4.4.0 Release 4)". [i.4] ETSI TS 100 905 (V7.0.0) (08-1999): "Digital cellular telecommunications system (Phase 2+) (GSM); Teleservices supported by a GSM Public Land Mobile Network (PLMN) (GSM 02.03 version 7.0.0 Release 1998)". [i.5] ETSI TS 122 003 (V4.3.0) (03-2002): "Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Circuit Teleservices supported by a Public Land Mobile Network (PLMN) (3GPP TS 22.003 version 4.3.0 Release 4)". [i.6] ETSI TS 101 349 (V8.16.0) (09-2002): "Digital cellular telecommunications system (Phase 2+); General Packet Radio Service (GPRS); Mobile Station (MS) - Base Station System (BSS) interface; Radio Link Control/ Medium Access Control (RLC/MAC) protocol (3GPP TS 04.60 version 8.16.0 Release 1999)". SIST EN 301 511 V12.5.1:2017

ETSI ETSI EN 301 511 V12.5.1 (2017-03) 9 [i.7] ETSI TR 100 028 (all parts) (V1.4.1) (12-2001): "Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics". [i.8] Void. [i.9] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC. [i.10] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request to the European Committee for Electrotechnical Standardisation and to the European Telecommunications Standards Institute as regards radio equipment in support of Directive 2014/53/EU of the European Parliament and of the Council. [i.11] ETSI TR 100 028-2: "ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics Part 2". [i.12] ETSI EG 203 336: "Electromagnetic compatibility and Radio spectrum Matters (ERM); Guide for the selection of technical parameters for the production of Harmonised Standards covering article 3.1(b) and article 3.2 of Directive 2014/53/EU". [i.13] ETSI TS 100 908 (V8.10.0) (10-2001): "Digital cellular telecommunications system (Phase 2+); Multiplexing and multiple access on the radio path (3GPP TS 05.02 version 8.10.0 Release 1999)". [i.14] ETSI TS 145 002 (V4.5.0) (11-2001): "Digital cellular telecommunications system (Phase 2+); Multiplexing and multiple access on the radio path (3GPP TS 45.002 version 4.5.0 Release 4)". [i.15] ETSI TS 144 060 (V12.3.0) (01-2015): "Digital cellular telecommunications system (Phase 2+); General Packet Radio Service (GPRS); Mobile Station (MS) - Base Station System (BSS) interface; Radio Link Control / Medium Access Control (RLC/MAC) protocol (3GPP TS 44.060 version 12.3.0 Release 12)". [i.16] ETSI TS 100 910 (V8.20.0) (11-2005): "Digital cellular telecommunications system (Phase 2+); Radio Transmission and Reception (3GPP TS 05.05 version 8.20.0 Release 1999)". [i.17] ETSI TS 145 005 (V12.5.0) (04-2015): "Digital cellular telecommunications system (Phase 2+); Radio transmission and reception (3GPP TS 45.005 version 12.5.0 Release 12)". [i.18] ETSI TR 121 905 (V12.0.0) (10-2014): "Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Vocabulary for 3GPP Specifications (3GPP TR 21.905 version 12.0.0 Release 12)". 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI TR 121 905 [i.18] and the following apply: EGPRS: any subset of the packet traffic channels PDTCH/MCS-1 to MCS-9 and related control channels E-GSM: extended GSM 900 band (includes P-GSM band) environmental profile: range of environmental conditions under which equipment within the scope of the present document is required to comply with the provisions of the present document ER-GSM 900: extended Railway GSM 900 band (includes R-GSM band) GPRS: any subset of the packet traffic channels PDTCH/CS-1 to CS-4 and related control channels GSM 900: P-GSM, E-GSM and R-GSM band unless otherwise specified, SIST EN 301 511 V12.5.1:2017

ETSI ETSI EN 301 511 V12.5.1 (2017-03) 10 GSM: GSM 400, GSM 900, ER-GSM 900 and DCS 1800 band unless otherwise specified P-GSM: primary GSM 900 band R-GSM: Railways GSM 900 band (includes P-GSM band and E-GSM band) 3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply: AM Amplitude Modulation DLMC Downlink Multi-Carrier ECSD Enhanced Circuit Switched Data EGPRS Enhanced GPRS ER-GSM Extended Railways GSM GPRS General Packet Radio Service GSM Global System for Mobile communications HSCSD High Speed Circuit Switched Data MS Mobile Station which includes a GSM radio part RF Radio Frequency RX Reception TCH/FS Traffic CHannel for Full rate Speech TDMA Time Division Multiple Access TX Transmission 4 Technical requirements specifications 4.1 Environmental profile The technical requirements of the present document apply under the environmental profile for operation of the equipment, which shall be declared by the manufacturer. The equipment shall comply with all the technical requirements of the present document which are identified as applicable in annex A at all times when operating within the boundary limits of the required operational environmental profile. 4.2 Conformance requirements 4.2.0 Introduction The present document contains all requirements that are needed for terminals to meet the essential requirement as defined in the Directive 2014/53/EU [i.9], article 3.2: - The present document gives normative reference to a clause of ETSI TS 151 010-1 [2] containing the conformance requirement text and references to the base standard. To meet the essential requirement under article 3.2 of Directive 2014/53/EU [i.9], a set of essential parameters have been identified. Table 2 provides a cross reference between these essential parameters and the corresponding technical requirements for equipment within the scope of the present document. SIST EN 301 511 V12.5.1:2017

ETSI ETSI EN 301 511 V12.5.1 (2017-03) 11 Table 2: Essential parameters and corresponding technical requirements and test suites Essential parameters Corresponding technical requirements Corresponding test suites Transmitter spectrum mask 4.2.6 Transmitter - Output RF spectrum 4.2.7 Transmitter output power and burst timing in HSCSD multislot configurations 4.2.8 Transmitter - Output RF spectrum in HSCSD multislot configuration 4.2.9 Transmitter - Output RF spectrum for MS supporting the R-GSM or ER-GSM frequency band 4.2.11 Output RF spectrum in GPRS multislot configuration 4.2.29 Output RF spectrum in EGPRS configuration 5.3.6 5.3.7
5.3.8
5.3.9
5.3.11
5.3.29 Transmitter unwanted emissions in the out of band domain Transmitter unwanted emissions in the spurious domain 4.2.12 Conducted spurious emissions - MS allocated a channel 4.2.13 Conducted spurious emissions - MS in idle mode 4.2.14 Conducted spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS allocated a channel 4.2.15 Conducted spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS in idle mode 4.2.16 Radiated spurious emissions - MS allocated a channel 4.2.17 Radiated spurious emissions - MS in idle mode 4.2.18 Radiated spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS allocated a channel 4.2.19 Radiated spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS in idle mode 5.3.12
5.3.13 5.3.14
5.3.15
5.3.16
5.3.17 5.3.18
5.3.19
Transmitter power limits 4.2.5 Transmitter output power and burst timing 4.2.10 Transmitter output power in GPRS multislot configuration 4.2.28 EGPRS Transmitter output power 5.3.5 5.3.10
5.3.28 Transmitter power accuracy Transmitter frequency stability 4.2.1 Transmitter - Frequency error and phase error 4.2.2 Transmitter - Frequency error under multipath and interference conditions 4.2.3 Transmitter - Frequency error and phase error in HSCSD multislot configuration 4.2.4 Frequency error and phase error in GPRS multislot configuration 4.2.26 Frequency error and Modulation accuracy in EGPRS Configuration 4.2.27 Frequency error under multipath and interference conditions in EGPRS Configuration 5.3.1 5.3.2
5.3.3
5.3.4
5.3.26
5.3.27
ETSI ETSI EN 301 511 V12.5.1 (2017-03) 12 Essential parameters Corresponding technical requirements Corresponding test suites Receiver unwanted emissions in the spurious domain 4.2.20 Receiver Blocking and spurious response - speech channels 4.2.21 Receiver Blocking and spurious response - speech channels for MS supporting the R-GSM or ER-GSM frequency band 4.2.22 Improved Receiver Blocking and spurious response - speech channels for 8W MS supporting the R-GSM or ER-GSM frequency band 4.2.23 Improved Receiver Blocking and spurious response - speech channels for 2W MS supporting the R-GSM or ER-GSM frequency band 4.2.24 Improved Receiver Blocking and spurious response - control channels for 8W MS supporting the R-GSM or ER-GSM frequency band not supporting speech 4.2.25 Improved Receiver Blocking and spurious response - control channels for 2W MS supporting the R-GSM or ER-GSM frequency band not supporting speech 4.2.30 Blocking and spurious response in EGPRS configuration 4.2.31 Blocking and spurious response in DLMC configuration 5.3.20
5.3.21
5.3.22
5.3.23
5.3.24
5.3.25
5.3.30
5.3.31
Receiver blocking Receiver spurious response rejection Desensitization Receiver intermodulation 4.2.32 Intermodulation rejection - speech channels 4.2.33 Intermodulation rejection - speech channels 4.2.34 Intermodulation rejection - EGPRS 4.2.35 AM suppression - speech channels 4.2.36 AM suppression - control channels 4.2.37 AM suppression - packet channels 5.3.32 5.3.33 5.3.34 5.3.35 5.3.36 5.3.37 Receiver adjacent channel signal selectivity 4.2.38 Adjacent channel rejection - speech channels (TCH/FS) 4.2.39 Adjacent channel rejection - control channels 4.2.40 Adjacent channel rejection - EGPRS 4.2.41 Adjacent channel rejection in DLMC configuration 5.3.38
5.3.39 5.3.40 5.3.41
Receiver sensitivity 4.2.42 Reference sensitivity - TCH/FS 4.2.43 Reference sensitivity - FACCH/F 4.2.44 Minimum Input level for Reference Performance - GPRS 4.2.45 Minimum Input level for Reference Performance - EGPRS 4.2.46 Reference sensitivity - TCH/FS for MS supporting the R-GSM or ER-GSM band 5.3.42 5.3.43 5.3.44
5.3.45
5.3.46
Antenna
Unless otherwise stated, the transmitter and receiver characteristics are specified at the antenna connector(s) of the MS. For MS(s) with an integral antenna only, a reference antenna(s) with a gain of 0 dBi should be assumed for each antenna port(s). An MS with integral antenna(s) may be taken into account by converting these power levels into field strength requirements, assuming a 0 dBi gain antenna. 4.2.1 Transmitter - Frequency error and phase error Clauses 13.1.1 and 13.1.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.2 Transmitter - Frequency error under multipath and interference conditions Clauses 13.2.1 and 13.2.2 of ETSI TS 151 010-1 [2] shall apply. SIST EN 301 511 V12.5.1:2017

ETSI ETSI EN 301 511 V12.5.1 (2017-03) 13 4.2.3 Transmitter - Frequency error and phase error in HSCSD multislot configuration Clauses 13.6.1 and 13.6.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.4 Frequency error and phase error in GPRS multislot configuration Clauses 13.16.1.1 and 13.16.1.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.5 Transmitter output power and burst timing Clauses 13.3.1 and 13.3.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.6 Transmitter - Output RF spectrum Clauses 13.4.1 and 13.4.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.7 Transmitter output power and burst timing in HSCSD multislot configurations Clauses 13.7.1 and 13.7.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.8 Transmitter - Output RF spectrum in HSCSD multislot configuration Clauses 13.8.1 and 13.8.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.9 Transmitter - Output RF spectrum for MS supporting the R-GSM or ER-GSM frequency band Clauses 13.9.1 and 13.9.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.10 Transmitter output power in GPRS multislot configuration Clauses 13.16.2.1 and 13.16.2.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.11 Output RF spectrum in GPRS multislot configuration Clauses 13.16.3.1 and 13.16.3.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.12 Conducted spurious emissions - MS allocated a channel Clauses 12.1.1.1 and 12.1.1.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.13 Conducted spurious emissions - MS in idle mode Clauses 12.1.2.1 and 12.1.2.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.14 Conducted spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS allocated a channel Clauses 12.3.1.1 and 12.3.1.2 of ETSI TS 151 010-1 [2] shall apply. SIST EN 301 511 V12.5.1:2017

ETSI ETSI EN 301 511 V12.5.1 (2017-03) 14 4.2.15 Conducted spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS in idle mode Clauses 12.3.2.1 and 12.3.2.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.16 Radiated spurious emissions - MS allocated a channel Clauses 12.2.1.1 and 12.2.1.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.17 Radiated spurious emissions - MS in idle mode Clauses 12.2.2.1 and 12.2.2.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.18 Radiated spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS allocated a channel Clauses 12.4.1.1 and 12.4.1.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.19 Radiated spurious emissions for MS supporting the R-GSM or ER-GSM frequency band - MS in idle mode Clauses 12.4.2.1 and 12.4.2.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.20 Receiver Blocking and spurious response - speech channels Clauses 14.7.1.1 and 14.7.1.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.21 Receiver Blocking and spurious response - speech channels for MS supporting the R-GSM or ER-GSM frequency band Clauses 14.7.3.1 and 14.7.3.2 of ETSI TS 151 010-1 [2] shall apply. 4.2.22 Improved Receiver Blocking and spurious response - speech channels for 8W MS supporting the R-GSM or ER-GSM frequency band Clauses 4.2.1 and 4.3.1 of ETSI TS 102 933-2 [4] shall apply. 4.2.23 Improved Receiver Blocking and spurious response - speech channels for 2W MS supporting the R-GSM or ER-GSM frequency band Clauses 5.2.1 and 5.3.1 of ETSI TS 102 933-2 [4] shall apply. 4.2.24 Improved Receiver Blocking and spurious response - control channels for 8W MS supporting the R-GSM or ER-GSM frequency band not supporting speech Clauses 4.2.2 and 4.3.2 of ETSI TS 102 933-2 [4] shall apply. SIST EN 301 511 V12.5.1:2017

ETSI ETSI EN 301 511 V12.5.1 (2017-03) 15 4.2.25 Improved Receiver Blocking and spurious response - control channels for 2W MS supporting the R-GSM or ER-GSM frequency band not supporting speech Clauses 5.2.2 and 5.3.2 of ETSI TS 102 933-2 [4] shall apply. 4.2.26 Frequency error and Modulation accuracy in EGPRS Configuration Clauses 13.17.1.1 and 13.17.1.2
...