ETSI EN 302 065-4 V1.1.1 (2016-11)

ETSI EN 302 065-4 V1.1.1 (2016-11)






HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD) using
Ultra Wide Band technology (UWB);
Harmonised Standard covering the essential requirements of
article 3.2 of the Directive 2014/53/EU;
Part 4: Material Sensing devices using
UWB technology below 10,6 GHz

---------------------- Page: 1 ----------------------
2 ETSI EN 302 065-4 V1.1.1 (2016-11)



Reference
DEN/ERM-TGUWB-132
Keywords
harmonised standard, radio, SRD, testing, UWB

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 302 065-4 V1.1.1 (2016-11)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 10
3.1 Definitions . 10
3.2 Symbols . 10
3.3 Abbreviations . 11
4 Technical requirements specifications . 11
4.1 Environmental conditions . 11
4.2 General . 11
4.3 Transmitter conformance requirements . 12
4.3.1 Operating bandwidth. 12
4.3.1.1 Applicability. 12
4.3.1.2 Description . 12
4.3.1.3 Limits . 13
4.3.1.4 Conformance . 13
4.3.2 Maximum value of mean power spectral density . 13
4.3.2.1 Applicability. 13
4.3.2.2 Description . 13
4.3.2.3 Limits . 13
4.3.2.4 Conformance . 14
4.3.3 Maximum value of Peak power . 14
4.3.3.1 Applicability. 14
4.3.3.2 Description . 14
4.3.3.3 Limits . 14
4.3.3.4 Conformance . 14
4.3.4 Exterior Limits . 15
4.3.4.1 Introduction . 15
4.3.4.2 Exterior maximum value of mean power spectral density . 15
4.3.4.2.1 Applicability . 15
4.3.4.2.2 Description . 15
4.3.4.2.3 Limits . 15
4.3.4.2.4 Conformance . 16
4.3.4.3 Exterior maximum value of peak power . 16
4.3.4.3.1 Applicability . 16
4.3.4.3.2 Description . 17
4.3.4.3.3 Limits . 17
4.3.4.3.4 Conformance . 17
4.3.4.4 Exterior Other Emissions (OE) . 17
4.3.4.4.1 Applicability . 17
4.3.4.4.2 Description . 17
4.3.4.4.3 Limits . 17
4.3.4.4.4 Conformance . 17
4.3.4.5 Exterior Total Power . 17
4.3.4.5.1 Applicability . 17
4.3.4.5.2 Description . 18
4.3.4.5.3 Limits . 18
4.3.4.5.4 Conformance . 19
4.3.5 Total Power . 19
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 302 065-4 V1.1.1 (2016-11)
4.3.6 Other Emissions (OE) . 19
4.3.6.1 Applicability. 19
4.3.6.2 Description . 19
4.3.6.3 Limits . 19
4.3.6.4 Conformance . 19
4.3.7 Transmitter unwanted emissions . 20
4.4 Receiver Conformance requirements . 20
4.4.1 General . 20
4.4.2 Receiver spurious emissions . 20
4.4.2.1 Applicability. 20
4.4.2.2 Description . 20
4.4.2.3 Limits . 20
4.4.2.4 Conformance . 20
4.4.3 Receiver Interferer signal handling . 20
4.4.3.1 Applicability. 20
4.4.3.2 Description . 21
4.4.3.3 Limits . 21
4.4.3.4 Conformance . 21
4.5 Requirements for spectrum access . 21
4.5.1 Detect and Avoid (DAA) . 21
4.5.2 Listen-before-talk (LBT) . 21
4.5.2.1 Applicability. 21
4.5.2.2 Description . 21
4.5.2.3 Limits . 23
4.5.2.4 Conformance . 24
4.5.3 Low Duty Cycle (LDC) . 24
4.5.3.1 Applicability. 24
4.5.3.2 Description . 24
4.5.3.3 Limits . 24
4.5.3.4 Conformance . 24
4.6 Antenna Requirements . 24
4.7 Other Requirements and Mitigation techniques . 25
5 Testing for compliance with technical requirements . 25
5.1 Environmental conditions for testing . 25
5.2 General conditions for testing . 25
5.2.1 Product information . 25
5.2.2 Requirements for the test modulation . 25
5.2.3 Test conditions, power supply and ambient temperatures . 25
5.2.4 Choice of equipment for test suites . 25
5.2.5 Multiple Operating bandwidths and multiband equipment . 25
5.2.6 Testing of host connected equipment and plug-in radio devices . 25
5.3 Interpretation of the measurement results . 26
5.3.0 General . 26
5.3.1 Measurement uncertainty is equal to or less than maximum acceptable uncertainty . 26
5.3.2 Measurement uncertainty is greater than maximum acceptable uncertainty . 26
5.3.3 Emissions . 26
6 Conformance methods of measurement . 26
6.1 Introduction . 26
6.2 Initial Measurement steps . 26
6.3 Radiated measurements . 26
6.3.1 General . 26
6.3.2 Test sites and general arrangements for measurements involving the use of radiated fields . 26
6.3.3 Guidance on the use of a radiation test site . 26
6.3.3.1 General . 26
6.3.3.2 Range length . 27
6.3.4 Coupling of signals . 27
6.3.5 Standard test methods . 27
6.3.5.1 Generic measurement method . 27
6.3.5.1.1 Calibrated setup . 27
6.3.5.1.2 Substitution method . 27
ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 302 065-4 V1.1.1 (2016-11)
6.3.6 Standard calibration method . 27
6.4 Conducted measurements . 27
6.5 Conformance methods of measurement for transmitter . 27
6.5.1 General . 27
6.5.2 Method of measurements of the Ultra Wideband Emissions . 28
6.5.3 Operating bandwidth. 28
6.5.4 Mean power spectral density measurements . 29
6.5.5 Peak power spectral density measurements . 29
6.5.6 Exterior limit measurement. 29
6.5.6.1 General . 29
6.5.6.2 Exterior Mean power spectral density measurements . 29
6.5.6.3 Exterior Peak power spectral density measurements . 30
6.5.6.4 Exterior Other emissions . 30
6.5.6.5 Exterior Total Power spectral density (UE-TP) . 30
6.5.7 Total Power spectral density (UE-TP) . 30
6.5.8 Other emissions (OE). 30
6.6 Conformance methods of measurement for receiver . 31
6.6.1 Receiver spurious emissions . 31
6.6.2 Interferer signal handling . 31
6.7 Conformance test suites for spectrum access . 31
6.7.1 Detect and Avoid Mechanisms . 31
6.7.2 Listen Before Talk . 31
6.7.2.1 Measurement procedure . 31
6.7.2.2 Test set-up . 31
6.7.2.3 Listen Before Talk (LBT) requirements for radar: threshold levels and reception times to protect
Radar services . 34
6.7.3 Low Duty Cycle . 34
6.8 Conformance test suites for antenna requirements . 35
6.9 Other test suites . 35
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 36
Annex B (informative): Application form for testing . 38
B.1 Introduction . 38
B.2 Product Information for ETSI EN 302 065-4, clause 5.2.1 . 38
B.2.1 Type of Equipment (stand-alone, combined, plug-in radio device, etc.) . 38
B.2.2 The nominal voltages of the stand-alone radio equipment or the nominal voltages of the combined
(host) equipment or test jig in case of plug-in devices . 38
B.3 Signal related Information for ETSI 302 065-4, clause 4.3 . 39
B.3.1 Introduction . 39
B.3.2 Operating bandwidth(s) of the equipment: . 39
B.3.3 The worst case mode for each of the following tests:. 39
B.4 RX test Information for ETSI EN 302 065-4, clause 4.4 . 39
B.4.1 Introduction . 39
B.4.2 Performance criterion and level of performance . 39
B.4.3 Applicable Interferers . 39
B.5 Information on spectrum access by ETSI EN 302 065-4, clause 4.5 . 40
B.5.1 Introduction . 40
B.5.2 Spectrum access . 40
B.6 Additional information provided by the applicant . 40
B.6.1 About the DUT . 40
B.6.2 Additional items and/or supporting equipment provided . 40
Annex C (normative): Equivalent mitigation techniques . 42
C.1 Equivalent mitigation techniques and LDC limits . 42
C.2 Test Procedure . 42
ETSI

---------------------- Page: 5 ----------------------
6 ETSI EN 302 065-4 V1.1.1 (2016-11)
C.3 Limit . 42
Annex D (normative): Definition of the representative absorbing material and procedure
for measurement of the undesired emissions . 43
D.1 Representative absorbing material definition for measuring the undesired emissions and LBT
function. 43
D.2 Representative wall . 43
D.3 Other absorbing
...

Draft ETSI EN 302 065-4 V1.1.0 (2016-04)






HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD) using
Ultra Wide Band technology (UWB);
Harmonised Standard covering the essential requirements of
article 3.2 of the Directive 2014/53/EU;
Part 4: Material Sensing devices using
UWB technology below 10,6 GHz;

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 302 065-4 V1.1.0 (2016-04)



Reference
DEN/ERM-TGUWB-132
Keywords
Harmonised standard, radio, SRD, testing, UWB

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 302 065-4 V1.1.0 (2016-04)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 10
3.1 Definitions . 10
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specifications . 11
4.1 Environmental conditions . 11
4.2 General . 11
4.3 Transmitter conformance requirements . 12
4.3.1 Operating bandwidth. 12
4.3.1.1 Applicability. 12
4.3.1.2 Description . 12
4.3.1.3 Limits . 12
4.3.1.4 Conformance . 12
4.3.2 Maximum value of mean power spectral density . 13
4.3.2.1 Applicability. 13
4.3.2.2 Description . 13
4.3.2.3 Limits . 13
4.3.2.4 Conformance . 14
4.3.3 Maximum value of Peak power . 14
4.3.3.1 Applicability. 14
4.3.3.2 Description . 14
4.3.3.3 Limits . 14
4.3.3.4 Conformance . 14
4.3.4 Exterior Limits . 15
4.3.4.1 Introduction . 15
4.3.4.2 Exterior maximum value of mean power spectral density . 15
4.3.4.2.1 Applicability . 15
4.3.4.2.2 Description . 15
4.3.4.2.3 Limits . 15
4.3.4.2.4 Conformance . 16
4.3.4.3 Exterior maximum value of peak power . 16
4.3.4.3.1 Applicability . 16
4.3.4.3.2 Description . 16
4.3.4.3.3 Limits . 16
4.3.4.3.4 Conformance . 16
4.3.4.4 Exterior Other Emissions (OE) . 16
4.3.4.4.1 Applicability . 16
4.3.4.4.2 Description . 16
4.3.4.4.3 Limits . 16
4.3.4.4.4 Conformance . 17
4.3.4.5 Exterior Total Power . 17
4.3.4.5.1 Applicability . 17
4.3.4.5.2 Description . 17
4.3.4.5.3 Limits . 18
4.3.4.5.4 Conformance . 18
4.3.5 Total Power . 18
ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 302 065-4 V1.1.0 (2016-04)
4.3.6 Other Emissions (OE) . 18
4.3.6.1 Applicability. 18
4.3.6.2 Description . 18
4.3.6.3 Limits . 18
4.3.6.4 Conformance . 18
4.3.7 Transmitter unwanted emissions . 19
4.4 Receiver Conformance requirements . 19
4.4.1 Receiver requirements . 19
4.4.2 Receiver spurious emissions . 19
4.4.2.1 Applicability. 19
4.4.2.2 Description . 19
4.4.2.3 Limits . 19
4.4.2.4 Conformance . 19
4.4.3 Receiver Interferer signal handling . 19
4.4.3.1 Applicability. 19
4.4.3.2 Description . 19
4.4.3.3 Limits . 20
4.4.3.4 Conformance . 20
4.5 Requirements for spectrum access . 20
4.5.1 Detect and Avoid (DAA) . 20
4.5.2 Listen-before-talk (LBT) . 20
4.5.2.1 Applicability. 20
4.5.2.2 Description . 20
4.5.2.3 Limits . 22
4.5.2.4 Conformance . 23
4.5.3 Low Duty Cycle (LDC) . 23
4.5.3.1 Applicability. 23
4.5.3.2 Description . 23
4.5.3.3 Limits . 23
4.5.3.4 Conformance . 23
4.6 Antenna Requirements . 23
4.7 Other Requirements and Mitigation techniques . 23
5 Testing for compliance with technical requirements . 23
5.1 Environmental conditions for testing . 23
5.2 General conditions for testing . 23
5.2.1 Product information . 23
5.2.2 Requirements for the test modulation . 24
5.2.3 Test conditions, power supply and ambient temperatures . 24
5.2.4 Choice of equipment for test suites . 24
5.2.5 Multiple Operating bandwidths and multiband equipment . 24
5.2.6 Testing of host connected equipment and plug-in radio devices . 24
5.3 Interpretation of the measurement results . 24
5.3.0 General . 24
5.3.1 Measurement uncertainty is equal to or less than maximum acceptable uncertainty . 24
5.3.2 Measurement uncertainty is greater than maximum acceptable uncertainty . 24
5.3.3 Emissions . 24
6 Conformance methods of measurement . 24
6.1 Introduction . 24
6.2 Initial Measurement steps . 24
6.3 Radiated measurements . 25
6.3.1 General . 25
6.3.2 Test sites and general arrangements for measurements involving the use of radiated fields . 25
6.3.3 Guidance on the use of a radiation test site . 25
6.3.3.1 General . 25
6.3.3.2 Range length . 25
6.3.4 Coupling of signals . 25
6.3.5 Standard test methods . 25
6.3.5.1 Generic measurement method . 25
6.3.5.1.1 Calibrated setup . 25
6.3.5.1.2 Substitution method . 25
ETSI

---------------------- Page: 4 ----------------------
5 Draft ETSI EN 302 065-4 V1.1.0 (2016-04)
6.3.6 Standard calibration method . 25
6.4 Conducted measurements . 25
6.5 Conformance methods of measurement for transmitter . 25
6.5.1 General . 25
6.5.2 Method of measurements of the Ultra Wideband Emissions . 26
6.5.3 Operating bandwidth. 26
6.5.4 Mean power spectral density measurements . 27
6.5.5 Peak power spectral density measurements . 27
6.5.6 Exterior limit measurement. 27
6.5.6.1 General . 27
6.5.6.2 Exterior Mean power spectral density measurements . 27
6.5.6.3 Exterior Peak power spectral density measurements . 28
6.5.6.4 Exterior Other emissions . 28
6.5.6.5 Exterior Total Power spectral density (UE-TP) . 28
6.5.7 Total Power spectral density (UE-TP) . 28
6.5.8 Other emissions (OE). 28
6.6 Conformance methods of measurement for receiver . 28
6.6.1 Receiver spurious emissions . 28
6.6.2 Interferer signal handling . 29
6.7 Conformance test suites for spectrum access . 29
6.7.1 Detect and Avoid Mechanisms . 29
6.7.2 Listen Before Talk . 29
6.7.2.1 Measurement procedure . 29
6.7.2.2 Test set-up . 29
6.7.2.3 Listen Before Talk (LBT) requirements for radar: threshold levels and reception times to protect
Radar services. . 31
6.7.3 Low Duty Cycle . 32
6.8 Conformance test suites for antenna requirements . 32
6.9 Other test suites . 32
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 33
Annex B (informative): Application form for testing . 35
B.1 Introduction . 35
B.2 Product Information for ETSI EN 302 065-4, clause 5.2.1 . 35
B.2.1 Type of Equipment (stand-alone, combined, plug-in radio device, etc.) . 35
B.2.2 The nominal voltages of the stand-alone radio equipment or the nominal voltages of the combined
(host) equipment or test jig in case of plug-in devices . 35
B.3 Signal related Information for ETSI 302 065-4, clause 4.3 . 36
B.3.1 Introduction . 36
B.3.2 Operating bandwidth(s) of the equipment: . 36
B.3.3 The worst case mode for each of the following tests:. 36
B.4 RX test Information for ETSI EN 302 065-4, clause 4.4 . 36
B.4.1 Introduction . 36
B.4.2 Performance criterion and level of performance . 36
B.4.3 Applicable Interferers . 36
B.5 Information on spectrum access by ETSI EN 302 065-4, clause 4.5 . 37
B.5.1 Introduction . 37
B.5.2 Spectrum access . 37
B.6 Additional information provided by the applicant . 37
B.6.1 About the DUT . 37
B.6.2 Additional items and/or supporting equipment provided . 37
Annex C (normative): Equivalent mitigation techniques . 39
C.1 Equivalent mitigation techniques and LDC limits . 39
C.2 Test Procedure . 39
ETSI

---------------------- Page: 5 ----------------------
6 Draft ETSI EN 302 065-4 V1.1.0 (2016-04)
C.3 Limit . 39
Annex D (normative): Definition of the representative absorbing material and procedure
for measurement of the undesired emissions . 40
D.1 Representative absorbing material definition for measuring the undesired emissions and LBT
function. 40
D.2 Representative wall .
...