ETSI TS 134 123-3 V15.4.0 (2020-02)

ETSI TS 134 123-3 V15.4.0 (2020-02)






TECHNICAL SPECIFICATION
Universal Mobile Telecommunications System (UMTS);
User Equipment (UE) conformance specification;
Part 3: Abstract test suite (ATS)
(3GPP TS 34.123-3 version 15.4.0 Release 15)



---------------------- Page: 1 ----------------------
3GPP TS 34.123-3 version 15.4.0 Release 15 1 ETSI TS 134 123-3 V15.4.0 (2020-02)



Reference
RTS/TSGR-0534123-3vF40
Keywords
UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2020.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 34.123-3 version 15.4.0 Release 15 2 ETSI TS 134 123-3 V15.4.0 (2020-02)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Legal Notice
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities. These shall be
interpreted as being references to the corresponding ETSI deliverables.
The cross reference between 3GPP and ETSI identities can be found under http://webapp.etsi.org/key/queryform.asp.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 34.123-3 version 15.4.0 Release 15 3 ETSI TS 134 123-3 V15.4.0 (2020-02)
Contents
Intellectual Property Rights . 2
Legal Notice . 2
Modal verbs terminology . 2
Foreword . 15
Introduction . 15
1 Scope . 16
2 References . 16
3 Definitions and abbreviations . 19
3.1 Definitions . 19
3.2 Abbreviations . 19
4 Requirements on the TTCN development . 19
5 TTCN-2 ATS structure . 20
5.1 Modularity . 20
5.1.1 Module structure . 21
5.1.2 Contents of the modules . 23
5.1.3 Example of a working platform . 23
6 Test method and testing architecture . 24
6.1 Test method . 24
6.2 TTCN-2 Testing architecture . 25
6.2.1 Lower Tester (LT) . 25
6.2.2 Configuration and initialization . 25
6.2.3 Upper Tester (UT) . 26
6.2.4 TTCN-2 . 26
6.2.5 Model extension . 26
6.2.6 Multiplexing of RLC services . 26
6.3 NAS test method and architecture . 26
6.3.1 Test configuration . 26
6.3.2 Routing UL NAS massages in SS . 27
6.4 RRC and RAB test method and architecture . 28
6.4.1 Test configuration . 28
6.4.2 RAB test method . 29
6.4.2.1 Sending data on the same TTI . 29
6.4.2.2 Sending continuous data on consecutive TTIs . 29
6.5 RLC test method and architecture . 30
6.5.1 Testing architecture. 30
6.5.2 Test method . 31
6.5.2.1 Handling SUFIs in TTCN . 34
6.5.2.2 Void. 35
6.6 SMS test method and architecture . 35
6.6.1 SMS CS test method and architecture. 35
6.6.2 SMS PS test method and architecture . 35
6.6.3 SMS Cell broadcasting test method and architecture. 35
6.7 MAC test method and architecture . 35
6.7.1 Testing architecture. 35
6.7.2 Test method . 36
6.7.2.1 Abnormal decoding situations . 36
6.7.2.2 MAC_es/e test method (Rel-6 or later) . 36
6.7.2.3 MAC_is/i test method (Rel-8 or later) . 37
6.8 BMC test method and architecture . 39
6.8.1 BMC test architecture . 39
6.8.2 BMC test method . 39
6.9 PDCP test . 41
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 34.123-3 version 15.4.0 Release 15 4 ETSI TS 134 123-3 V15.4.0 (2020-02)
6.9.1 PDCP test architecture . 41
6.9.2 PDCP test method . 42
6.9.2.1 CS voice over HSPA . 42
6.9.2.2 Network initiated secondary PDP context . 43
6.10 Multi-RAT Handover Test Model . 43
6.10.1 Overview . 43
6.10.2 ASP function description . 44
6.10.2.1 Identities . 44
6.10.2.2 Cell configuration and control. 44
6.10.2.3 L1 (GERAN) configuration and control . 44
6.10.2.3.1 Basic physical channel configuration . 45
6.10.2.3.2 Multislot configuration for circuit or packet switched channels . 45
6.10.2.3.3 Frame in the near future. 46
6.10.2.3.4 L1 header . 46
6.10.2.4 L2 configuration and control . 46
6.10.2.4.1 Don't response to some handover access bursts. 46
6.10.2.4.2 No UA reply to SABM . 46
6.10.2.5 System Information sending. 46
6.10.2.6 Paging . 47
6.10.2.7 Generic procedures for GPRS signalling . 47
6.10.2.7.1 GPRS generic attach procedures and ciphering mode control . 47
6.10.2.7.2 Cell change order within a TBF. 49
6.10.2.8 Generic configuration procedure for GSM ciphering mode control . 51
6.10.2.9 L|H bits convention and bit padding in DL . 51
6.10.2.9.1 GERAN DL RLC/MAC message bit padding . 51
6.10.2.9.2 GSM DL message spare padding . 52
6.10.2.9.3 L | H convention in rest octets of GSM DL messages . 52
6.10.2.9.4 Spare Bits . 52
6.10.2.9.5 GSM System Information messages on SACCH . 52
6.10.2.9.6 GSM Measurement Information messages on SACCH. 52
6.11 DCH-DSCH model (R99 or Rel-4) . 54
6.12 DCH with HS-DSCH (MAC-hs) model (FDD, Rel-5 or later) . 55
6.12a DCH with HS-DSCH model for 1.28 Mcps TDD (Rel-5 or later) . 56
6.12b DCH with HS-DSCH (MAC-ehs) model (FDD, Rel-7 or later) . 57
6.12c HS-DSCH (MAC-hs/ehs) model (FDD, Rel-7 or later)(No DCH Associated) . 58
6.12d HS-DSCH (MAC-ehs) model for DC/4C -HSDPA (FDD, Rel-8 or later) . 59
6.12e HS-DSCH (MAC-ehs) model for Multiflow Operation (FDD, Rel-11 or later) . 60
6.13 E-DCH model (Rel-6 or later) . 62
6.13.1 MAC-e/MAC-es test model . 62
6.13.2 MAC-i/MAC-is test model (Rel-8 or later) . 64
6.13.2.1 MAC-i/MAC-is test model for Enhanced UL in Cell_FACH (Rel-8 or later) . 65
6.13.2.2 MAC-i/MAC-is test model for DC-HSUPA (Rel-9 or later) . 65
6.14 MBMS model (Rel-6 or later) . 66
6.14.1 MBMS RLC test model . 68
6.14.1.1 RLC test model for MTCH test . 68
6.14.1.2 RLC test model for MCCH test. 68
6.15 IP signalling. 68
6.16 Supplementary Service test method and architecture . 68
6.16.1 Test configuration . 68
6.17 UTRAN-WLAN Inter working Test Model . 68
6A TTCN-3 Test method and testing architecture . 69
6A.1 Test system architecture . 69
6A.1.1 General system architecture . 69
6A.1.2 Component architecture . 69
6A.2 Test model . 69
6A.3 ASP specifications . 71
6A.3.1 ASPs for Control Primitive Transmission . 71
6A.3.1.1 FDD Control ASP extension types . 74
6A.3.1.1.1 CPHY_RL_Setup extension . 74
6A.3.1.1.1a CPHY_RL_Modify extension . 78
6A.3.1.1.2 CMAC_MACehs_HARQAssign_MultiFlows extension . 79
ETSI

---------------------- Page: 5 ----------------------
3GPP TS 34.123-3 version 15.4.0 Release 15 5 ETSI TS 134 123-3 V15.4.0 (2020-02)
6A.3.1.1.3 CMAC_MAChs_MACehs_TFRCconfigure extension . 80
6A.3.1.1.4 CRLC_BindTestDataInMultipleMACehs_PDU_MultiFlows extension. 82
6A.3.1.1.5 CMAC_Config . 82
6A.3.1.1.6 CRLC_Config . 84
6A.3.1.2 TDD Control ASP extension types . 84
6A.3.1.3 FDD and TDD Control ASP types . 84
6A.3.1.3.1 CPHY_HS_DPCCH_CQI_MultiCell (Rel-10 or later) . 84
6A.3.1.3.2 CPHY_MeasurementConfig . 86
6A.3.1.3.3 CMAC_ConfigMACehs_NodeB (Rel-11 or later) . 86
6A.3.1.3.4 CMAC_MACehs_NodeB_CellMapping (Rel-11 or later) . 87
6A.3.1.3.5 CMAC_MACehs_HARQAssign_NodeB (Rel-11 or later) . 88
6A.3.1.3.6 CRLC_BindTestDataInMultipleMACehs_PDU_NodeB (Rel-11 or later) . 89
6A.3.1.3.7 CPHY_AICH_NegAckModeSet (Rel-11 or later) . 89
6A.3.2 ASPs for Data Transmission and Reception . 90
6A.4 Upper Tester Interface . 90
6A.5 IXIT Proforma . 91
7 PCO and ASP definitions . 91
7.1 NAS PCO and ASP definitions . 91
7.1.1 NAS PCO Definitions . 91
7.1.2 Primitives used at Dc PCO . 91
7.2 Ut PCO and ASP definitions . 92
7.2.1 Ut PCO Declarations . 92
7.2.2 Primitives used at Ut PCO . 93
7.3 RRC PCO and ASP definitions . 93
7.3.1 AM/UM/TM PCO and ASP definitions. 93
7.3.1.1 SAP and PCO for data transmission and reception . 93
7.3.2 Control PCO and ASP . 94
7.3.2.1 SAP and PCO for control primitives transmission and reception . 94
7.3.2.2 Control ASP Type Definition . 96
7.3.2.2.1 CPHY_AICH_AckModeSet . 96
7.3.2.2.2 CPHY_Cell_Config . 96
7.3.2.2.3 CPHY_Cell_Release . 97
7.3.2.2.3a CPHY_Cell_TimingAdjust . 98
7.3.2.2.3b CPHY_Detect_TFCI . 99
7.3.2.2.4 CPHY_Ini . 99
7.3.2.2.5 CPHY_Cell_TxPower_Modify . 100
7.3.2.2.6 CPHY_Frame_Number . 100
7.3.2.2.6a CPHY_SFN (Rel-6 or later) . 101
7.3.2.2.6b CPHY_MBMS_MICH_q (Rel-6 or later) . 101
7.3.2.2.6c CPHY_MBMS_NI (Rel-6 or later) . 105
7.3.2.2.7 CPHY_Out_of_Sync . 106
7.3.2.2.8 CPHY_PRACH_Measurement . 106
7.3.2.2.9 CPHY_RL_Modify . 107
7.3.2.2.10 CPHY_RL_Release . 108
7.3.2.2.11 CPHY_RL_Setup . 109
7.3.2.2.12 CPHY_Sync . 124
7.3.2.2.12a CPHY_HS_DPCCH_AckNack (Rel-5 or later) . 124
7.3.2.2.12b CPHY_HS_DPCCH_CQI (Rel-5 or later) . 125
7.3.2.2.12b1 CPHY_HS_DPCCH_CQI_DC (Rel-8 or later) . 126
7.3.2.2.12c CPHY_HS_DSCH_CRC_Mode (Rel-5 or later) . 127
7.3.2.2.13 CPHY_TrCH_Config .
...