ETSI TS 103 267 V1.1.1 (2015-12)

ETSI TS 103 267 V1.1.1 (2015-12)






TECHNICAL SPECIFICATION
SmartM2M;
Smart Appliances;
Communication Framework

---------------------- Page: 1 ----------------------
2 ETSI TS 103 267 V1.1.1 (2015-12)



Reference
DTS/SmartM2M-103 267 SAP_Com
Keywords
data, data sharing, M2M, IoT, model, smart
appliance, ontology, semantic

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2015.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 103 267 V1.1.1 (2015-12)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 6
4 Smart Appliances communication functionality and protocols . 6
4.1 Introduction . 6
4.2 Smart Appliances Communication Framework. 7
5 Interworking with the Smart Appliances Communication Framework . 8
Annex A (informative): Interworking support in oneM2M and ETSI M2M frameworks . 9
A.1 Introduction . 9
A.2 Guidelines and principles . 9
History . 12


ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 103 267 V1.1.1 (2015-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Smart Machine-to-Machine
communications (SmartM2M).
The final scope is to provide a set of specifications that assure a smooth communication between the Smart Appliances
in the building and between the Smart Appliances and remote applications.
An important aspect is to ensure a common interworking framework to cater for the communication among systems that
apply the full set of specifications as referenced in the present document. This is in recognition of the potential long
term existence of legacy and specialized systems and the need to communication amongst & between systems.
The full set of specifications cover three aspects:
1) The semantic aspect with a reference ontology and its mapping on the oneM2M Communication Framework,
based on the Study on Semantic Assets for Smart Appliances Interoperability of the European Commission
DG Communications Networks, Content & Technology [i.1].
- ETSI TS 103 264 [1].
2) The communication framework, the present document.
3) The full testing support for the above mentioned documents:
- ETSI TS 103 268-1 [i.6].
- ETSI TS 103 268-2 [i.7].
- ETSI TS 103 268-3 [i.8].
- ETSI TS 103 268-4 [i.9].
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 103 267 V1.1.1 (2015-12)
1 Scope
The present document defines a framework for Smart Appliances communication based on oneM2M specifications. It
will also provide adjustments as required by the interested stakeholders.
The present document includes:
• An introduction to the oneM2M framework and its relation with the ETSI M2M one.
• The specification of the interworking framework for Smart Appliances with normative reference to oneM2M
specifications.
• The specification about how to interwork with the oneM2M framework.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI TS 103 264: "SmartM2M Smart Appliances Common Ontology and oneM2M Mapping".
[2] ETSI TS 118 111: "Common Terminology".
[3] ETSI TS 118 102: "Requirements".
[4] ETSI TS 118 101: "Functional architecture".
[5] ETSI TS 118 104: "Service Layer Core Protocol Specification".
[6] ETSI TS 118 103: "Security solutions".
[7] ETSI TS 118 105: "Management Enablement (OMA)".
[8] ETSI TS 118 106: "Management Enablement (BBF)".
[9] ETSI TS 118 109: "HTTP Protocol Binding".
[10] ETSI TR 102 966: "Machine-to-Machine communications (M2M); Interworking between the
M2M Architecture and M2M Area Network technologies".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 103 267 V1.1.1 (2015-12)
[i.1] D-S4: "Study on Semantic Assets for Smart Appliances Interoperability European Commission
DG Communications Networks, Content & Technology".
[i.2] ETSI TR 102 725: "Machine-to-Machine communications (M2M); Definitions".
[i.3] ETSI TS 102 689: "Machine-to-Machine communications (M2M); M2M Service Requirements".
[i.4] ETSI TS 102 690: "Machine-to-Machine communications (M2M); Functional architecture".
[i.5] ETSI TS 102 921: "Machine-to-Machine communications (M2M); mIa, dIa and mId interfaces".
[i.6] ETSI TS 103 268-1: "SmartM2M Smart Appliances Ontology and Communication Framework
Testing Part 1: Testing methodology".
[i.7] ETSI TS 103 268-2: "Smart Appliances Ontology and Communication Framework Testing;
Part 2: Conformance testing Protocol Implementation Conformence Statements (PICS)".
[i.8] ETSI TS 103 268-3: "Smart Appliances Ontology and Communication Framework Testing;
Part 3: Conformance testing; Test Suite Structure and Test Purposes (TSS&TP)".
[i.9] ETSI TS 103 268-4: "Smart Appliances Ontology and Communication Framework Testing; Part 4:
Conformance testing Abstract Test Suite (ATS) and Protocol Implementation eXtra Information
for Testing (PIXIT)".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ETSI TS 118 111 [2] and the following
apply.
A term defined in the present document takes precedence over the definition of the same term, if any, in ETSI
TS 118 111 [2].
SmartAppliance: home appliance able to consume or produce energy, with potential communication means with other
Smart Appliances and/or local or
...