ETSI TS 102 384 V10.2.0 (2015-03)

ETSI TS 102 384 V10.2.0 (2015-03)






TECHNICAL SPECIFICATION
Smart Cards;
UICC-Terminal interface;
Card Application Toolkit (CAT) conformance specification
(Release 10)

---------------------- Page: 1 ----------------------
Release 10 2 ETSI TS 102 384 V10.2.0 (2015-03)



Reference
RTS/SCP-00014va20
Keywords
smart card
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2015.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
Release 10 3 ETSI TS 102 384 V10.2.0 (2015-03)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 8
Introduction . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 10
3 Definitions and abbreviations . 10
3.1 Terminal definition and configurations . 10
3.2 Applicability . 10
3.2.1 Applicability of the present document . 10
3.2.2 Applicability of the individual tests . 11
3.2.3 Applicability to terminal equipment . 11
3.2.4 Definitions . 11
3.2.4.1 Format of the table of optional features . 11
3.2.4.2 Format of the applicability table . 11
3.2.4.3 Status and notations. 12
3.3 Table of optional features . 12
3.4 Applicability table . 15
3.5 Conventions for mathematical notations . 55
3.5.1 Mathematical signs . 55
3.6 Abbreviations . 55
4 Test equipment . 55
5 Testing methodology in general . 56
5.1 Testing of optional functions and procedures . 56
5.2 Test interfaces and facilities . 56
5.3 Information to be provided by the apparatus supplier . 56
6 Void . 57
7 Measurement uncertainty . 57
8 Format of tests . 57
9 Generic call set up procedures . 59
10 to 26 Void . 59
27 Testing of the UICC/Terminal interface . 59
27.1 to 27.21 Void . 59
27.22 Card Application Toolkit . 59
27.22.1a General Test purpose . 59
27.22.1b Definition of default values for Card Application Toolkit testing . 60
27.22.1 Initialization of Card Application Toolkit Enabled UICC by Card Application Toolkit Enabled
Terminal (Profile Download) . 63
27.22.1.1 Definition and applicability . 63
27.22.1.2 Conformance requirement . 63
27.22.1.3 Test purpose . 63
27.22.1.4 Method of test . 63
27.22.1.4.1 Initial conditions . 63
27.22.1.4.2 Procedure . 63
27.22.1.5 Test requirement . 64
27.22.2 Contents of the TERMINAL PROFILE command . 64
27.22.2.1 Definition and applicability . 64
27.22.2.2 Conformance requirement . 64
ETSI

---------------------- Page: 3 ----------------------
Release 10 4 ETSI TS 102 384 V10.2.0 (2015-03)
27.22.2.3 Test purpose . 64
27.22.2.4 Method of test . 64
27.22.2.4.1 Initial conditions . 64
27.22.2.4.2 Procedure . 64
27.22.2.5 Test requirement . 64
27.22.3 Servicing of proactive UICC commands . 65
27.22.3.1 Definition and applicability . 65
27.22.3.2 Conformance requirement . 65
27.22.3.3 Test purpose . 65
27.22.3.4 Method of test . 65
27.22.3.4.1 Initial conditions . 65
27.22.3.4.2 Procedure . 65
27.22.3.5 Test requirement . 65
27.22.4 Proactive UICC commands . 65
27.22.4.1 DISPLAY TEXT . 65
27.22.4.1.1 DISPLAY TEXT (Normal) . 65
27.22.4.1.2 DISPLAY TEXT (Support of "No response from user") . 75
27.22.4.1.3 DISPLAY TEXT (Display of extension text). 76
27.22.4.1.4 DISPLAY TEXT (Sustained text) . 78
27.22.4.1.5 DISPLAY TEXT (Display of icons) . 82
27.22.4.1.6 DISPLAY TEXT (UCS2 display supported in Cyrillic) . 87
27.22.4.1.7 DISPLAY TEXT (Variable Time out) . 89
27.22.4.1.8 DISPLAY TEXT (Support of Text Attribute) . 90
27.22.4.1.9 DISPLAY TEXT (UCS2 display in Chinese) . 116
27.22.4.1.10 DISPLAY TEXT (UCS2 display in Katakana) . 118
27.22.4.2 GET INKEY . 119
27.22.4.2.1 GET INKEY(normal) . 119
27.22.4.2.2 GET INKEY (No response from User) . 126
27.22.4.2.3 GET INKEY (UCS2 display in Cyrillic) . 128
27.22.4.2.4 GET INKEY (UCS2 entry in Cyrillic) . 130
27.22.4.2.5 GET INKEY ("Yes/No" Response) . 132
27.22.4.2.6 GET INKEY (display of Icon) . 134
27.22.4.2.7 GET INKEY (Help Information). 142
27.22.4.2.8 GET INKEY (Variable Time out) . 145
27.22.4.2.9 GET INKEY (Support of Text Attribute) . 147
27.22.4.2.10 GET INKEY (UCS2 display in Chinese) . 180
27.22.4.2.11 GET INKEY (UCS2 entry in Chinese) . 183
27.22.4.2.12 GET INKEY (UCS2 display in Katakana) . 185
27.22.4.2.13 GET INKEY (UCS2 entry in Katakana) . 187
27.22.4.3 GET INPUT . 189
27.22.4.3.1 GET INPUT (normal) . 189
27.22.4.3.2 GET INPUT (No response from User) . 202
27.22.4.3.3 GET INPUT (UCS2 display in Cyrillic) . 204
27.22.4.3.4 GET INPUT (UCS2 entry in Cyrillic) . 207
27.22.4.3.5 GET INPUT (default text) . 210
27.22.4.3.6 GET INPUT (display of Icon) . 214
27.22.4.3.7 GET INPUT (Help Information) . 222
27.22.4.3.8 GET INPUT (Support of Text Attribute) . 224
27.22.4.3.9 GET INPUT (UCS2 display in Chinese) . 261
27.22.4.3.10 GET INPUT (UCS2 entry in Chinese) . 264
27.22.4.3.11 GET INPUT (UCS2 display in Katakana) . 268
27.22.4.3.12 GET INPUT (UCS2 entry in Katakana) . 271
27.22.4.4 MORE TIME . 274
27.22.4.4.1 Definition and applicability . 274
27.22.4.4.2 Conformance requirement . 274
27.22.4.4.3 Test purpose . 274
27.22.4.4.4 Method of test . 274
27.22.4.4.5 Test requirement . 275
27.22.4.5 PLAY TONE. 275
27.22.4.5.1 PLAY TONE (Normal) . 275
27.22.4.5.2 PLAY TONE (UCS2 display in Cyrillic) . 287
27.22.4.5.3 PLAY TONE (display of Icon) . 290
ETSI

---------------------- Page: 4 ----------------------
Release 10 5 ETSI TS 102 384 V10.2.0 (2015-03)
27.22.4.5.4 PLAY TONE (Support of Text Attribute) . 298
27.22.4.5.5 PLAY TONE (UCS2 display in Chinese) . 327
27.22.4.5.6 PLAY TONE (UCS2 display in Katakana) . 330
27.22.4.6 POLL INTERVAL . 333
27.22.4.6.1 Definition and applicability . 333
27.22.4.6.2 Conformance requirement . 333
27.22.4.6.3 Test purpose . 333
27.22.4.6.4 Method of test . 334
27.22.4.6.5 Test requirement . 335
27.22.4.7 REFRESH . 335
27.22.4.7.1 REFRESH (normal) . 335
27.22.4.8 SET UP MENU and ENVELOPE MENU SELECTION . 338
27.22.4.8.1 SET UP MENU (normal) and ENVELOPE MENU SELECTION . 338
27.22.4.8.2 SET UP MENU (help request support) and ENVELOPE MENU SELECTION . 349
27.22.4.8.3 SET UP MENU (next action support) and ENVELOPE MENU SELECTION . 351
27.22.4.8.4 SET UP MENU (display of icons) and ENVELOPE MENU SELECTION . 353
27.22.4.8.5 SET UP MENU (soft keys support) and ENVELOPE MENU SELECTION . 358
27.22.4.8.6 SET UP MENU (support of Text Attribute) and ENVELOPE MENU SELECTION . 360
27.22.4.8.7 SET UP MENU (UCS2 display in Cyrillic) and ENVELOPE MENU SELECTION . 396
27.22.4.8.8 SET UP MENU (UCS2 display in Chinese) and ENVELOPE MENU SELECTION . 401
27.22.4.8.9 SET UP MENU (UCS2 display in Katakana) and ENVELOPE MENU SELECTION . 405
27.22.4.9 SELECT ITEM . 409
27.22.4.9.1 SELECT ITEM (mandatory features for Terminal supporting SELECT ITEM) . 409
27.22.4.9.2 SELECT ITEM (next action support) . 422
27.22.4.9.3 SELECT ITEM (default item support) . 423
27.22.4.9.4 SELECT ITEM (help request support) . 425
27.22.4.9.5 SELECT ITEM (icons support) . 427
27.22.4.9.6 SELECT ITEM (presentation style) . 431
27.22.4.9.7 SELECT ITEM (soft keys support) . 434
27.22.4.9.8 SELECT ITEM (Support of "No response from user") . 436
27.22.4.9.9 SELECT ITEM (Support of Text Attribute). 437
27.22.4.9.10 SELECT ITEM (UCS2 display in Cyrillic) . 471
27.22.4.9.11 SELECT ITEM (UCS2 display in Chinese) . 476
27.22.4.9.12 SELECT ITEM (UCS2 display in Katakana) . 478
27.22.4.10 SEND SHORT MESSAGE . 482
27.22.4.11 Void. 482
27.22.4.12 Void. 482
27.22.4.13 SET UP CALL . 482
27.22.4.14 POLLING OFF . 482
27.22.4.15 PROVIDE LOCAL INFORMATION . 482
27.22.4.15.1 Definition and applicability . 482
27.22.4.15.2 Conformance requirement . 483
27.22.4.15.3 Test purpose . 483
27.22.4.15.4 Method of tests . 483
27.22.4.15.5 Test requirement . 492
27.22.4.16 SET UP EVENT LIST . 492
27.22.4.16.1 SET UP EVENT LIST (normal) . 492
27.22.4.17 PERFORM CARD APDU . 499
27.22.4.17.1 PERFORM CARD APDU (normal) . 499
27.22.4.18 POWER OFF CARD . 517
27.22.4.18.1 POWER OFF CARD (normal) . 517
27.22.4.18.2 POWER OFF CARD (detachable card reader) . 519
27.22.4.19 POWER ON CARD . 520
27.22.4.19.1 POWER ON CARD (normal) . 520
27.22.4.19.2 POWER ON CARD (detachable card reader) . 524
27.22.4.20 GET READER STATUS . 525
27.22.4.20.1 GET READER STATUS (normal) . 525
27.22.4.20.2 GET CARD READER STATUS (detachable card reader) . 535
27.22.4.21 TIMER MANAGEMENT and ENVELOPE TIMER EXPIRATION . 537
27.22.4.21.1 TIMER MANAGEMENT (normal) . 537
27.22.4.21.2 ENVELOPE TIMER EXPIRATION (normal) . 575
27.22.4.22 SET UP IDLE MODE TEXT. 580
ETSI

---------------------- Page: 5 ----------------------
Release 10 6 ETSI TS 102 384 V10.2.0 (2015-03)
27.22.4.22.1 SET UP IDLE MODE TEXT (normal) . 580
27.22.4.22.2 SET UP IDLE MODE TEXT (Icon support) . 589
27.22.4.22.3 SET UP IDLE MODE TEXT (UCS2 display in Cyrillic) . 596
27.22.4.22.4 SET UP IDLE MODE TEXT (support of Text Attribute) . 597
27.22.4.22.5 SET UP IDLE MODE TEXT (UCS2 display in Chinese) . 625
27.22.4.22.6 SET UP IDLE MODE TEXT (UCS2 display in Katakana) . 626
27.22.4.23 RUN AT COMMAND . 628
27.22.4.23.1 RUN AT COMMAND (normal) . 628
27.22.4.23.2 RUN AT COMMAND (Icon support) . 630
27.22.4.23.3 RUN
...