ETSI TS 102 797-1 V1.2.1 (2014-06)

ETSI TS 102 797-1 V1.2.1 (2014-06)






Technical Specification
Intelligent Transport Systems (ITS);
Communications Access for Land Mobiles (CALM);
Test specifications for ITS station management (ISO 24102);
Part 1: Protocol Implementation Conformance Statement
(PICS) specification

---------------------- Page: 1 ----------------------
2 ETSI TS 102 797-1 V1.2.1 (2014-06)



Reference
RTS/ITS-00266
Keywords
CALM, ITS, PICS, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2014.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 102 797-1 V1.2.1 (2014-06)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 7
4 Conformance to this PICS proforma specification . 7
Annex A (normative): PICS proforma for the "ITS station-internal management
communications protocol" . 8
A.1 Guidance for completing the PICS proforma . 8
A.1.1 Purposes and structure . 8
A.1.2 Abbreviations and conventions . 8
A.1.3 Instructions for completing the PICS proforma. 10
A.2 Identification of the implementation . 10
A.2.1 Date of the statement . 10
A.2.2 Implementation Under Test (IUT) identification . 10
A.2.3 System Under Test (SUT) identification . 10
A.2.4 Product supplier . 11
A.2.5 Client (if different from product supplier) . 11
A.2.6 PICS contact person . 12
A.3 Identification of the protocol . 12
A.4 Global statement of conformance . 12
A.5 Basic functionality . 13
A.6 Protocol elements . 13
A.6.1 Service access points . 13
A.6.2 PDUs . 13
A.6.3 PDU elements . 13
A.7 Protocol procedures . 14
A.8 Values . 15
A.9 Security. 15
Annex B (normative): PICS proforma for the "Fast service advertisement protocol" . 16
B.1 Guidance for completing the PICS proforma . 16
B.1.1 Purposes and structure . 16
B.1.2 Abbreviations and conventions . 16
B.1.3 Instructions for completing the PICS proforma. 18
B.2 Identification of the implementation . 18
B.2.1 Date of the statement . 18
B.2.2 Implementation Under Test (IUT) identification . 18
B.2.3 System Under Test (SUT) identification . 18
ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 102 797-1 V1.2.1 (2014-06)
B.2.4 Product supplier . 19
B.2.5 Client (if different from product supplier) . 19
B.2.6 PICS contact person . 20
B.3 Identification of the protocol . 20
B.4 Global statement of conformance . 20
B.5 Basic functionality . 21
B.6 Protocol elements . 22
B.6.1 Processing entities . 22
B.6.2 Service access points . 22
B.6.2 PDUs . 22
B.6.3 PDU elements . 22
B.6.3.1 Service initialization phase . 22
B.7 Protocol procedures . 23
B.7.1 Service provider . 23
B.7.2 Service user . 24
B.7.3 Supported protocols . 24
History . 26

ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 102 797-1 V1.2.1 (2014-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Intelligent Transport Systems
(ITS).
The present document is part 1 of a multi-part deliverable covering Communications Access for Land Mobiles
(CALM); Test specifications for ITS station management (ISO 24102), as identified below:
Part 1: "Protocol Implementation Conformance Statement (PICS) specification";
Part 2: "Test Suite Structure and Test Purposes (TSS & TP)";
Part 3: "Abstract Test Suite (ATS) and partial PIXIT proforma".
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "may not", "need", "need not", "will",
"will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms
for the expression of provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and
options have been implemented for a telecommunication specification. Such a statement is called a "Protocol
Implementation Conformance Statement" (PICS).
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 102 797-1 V1.2.1 (2014-06)
1 Scope
The present document provides the "Protocol Implementation Conformance Statement" (PICS) proforma for the ISO
protocols specified in ISO 24102-4 [1] and ISO 24102-5 [2] in compliance with the relevant requirements, and in
accordance with the relevant guidance given in ISO/IEC 9646-7 [4], ETS 300 406 [3] and EG 202 798 [i.1].
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are necessary for the application of the present document.
[1] ISO 24102-4:2013: "Intelligent transport systems -- Communications access for land mobiles
(CALM) -- ITS station management -- Part 4: Station-internal management communications".
[2] ISO 24102-5:2013: "Intelligent transport systems -- Communications access for land mobiles
(CALM) -- ITS station management -- Part 5: Fast service advertisement protocol (FSAP)".
[3] ETSI ETS 300 406 (1995): "Methods for testing and Specification (MTS); Protocol and profile
conformance testing specifications; Standardization methodology".
[4] ISO/IEC 9646-7: "Information technology -- Open Systems Interconnection -- Conformance
testing methodology and framework -- Part 7: Implementation Conformance Statements".
2.2 Informative references
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI EG 202 798: "Intelligent Transport Systems (ITS); Testing; Framework for conformance and
interoperability testing".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ISO 24102-4 [1], ISO 24102-5 [2],
ETS 300 406 [3], ISO/IEC 9646-7 [4], EG 202 798 [i.1] and the following apply:
PICS proforma: document, in the form of a questionnaire, which when completed for an implementation or system
becomes a PICS
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TS 102 797-1 V1.2.1 (2014-06)
Protocol Implementation Conformance Statement (PICS): statement made by the supplier of an implementation or
system claimed to conform to a given specification, stating which capabilities have been implemented
NOTE: The PICS can take several forms: protocol PICS, profile PICS, profile specific PICS, information object
PICS, etc.
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in ISO 24102-4 [1], ISO 24102-5 [2],
ETS 300 406 [3], ISO/IEC 9646-7 [4], EG 202 798 [i.1] and the following apply:
FSAP Fast Service Advertisement Protocol
IUT Implementation Under Test
PICS Protocol Implementation Conformance Statement
SUT System Under Test
4 Conformance to this PICS proforma specification
If it claims to conform to the present document, the actual PICS proformas to be filled in by a supplier shall be
technically equivalent to the text of the PICS proformas given in annexes A or B, and shall preserve the
numbering/naming and ordering of the proforma items.
A PICS which conforms to the set of "ITS station-internal management communication protocol (IICP)" [1] shall be a
conforming PICS proforma completed in accordance with the guidance for completion given in clause A.1.
A PICS which conforms to "Fast Service Advertisement Protocol" (FSAP) [2] shall be a conforming PICS proforma
completed in accordance with the guidance for completion given in clause B.1.
NOTE: "ITS station-internal management communications" is an integral functionality of an implementation
option of FSAP.
ETSI

---------------------- Page: 7 ----------------------
8 ETSI TS 102 797-1 V1.2.1 (2014-06)
Annex A (normative):
PICS proforma for the "ITS station-internal management
communications protocol"
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that
users of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its
intended purposes and may further publish the completed PICS.
A.1 Guidance for completing the PICS proforma
A.1.1 Purposes and structure
The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the
requirements defined in ISO 24102-4 [1] may provide information about the implementation in a standardized manner.
The PICS proforma is subdivided into clauses for the following categories of information:
• guidance for completing the PICS proforma;
• identification of the implementation;
• identification of the protocol;
• global statement of conformance;
• PICS proforma tables.
A.1.2 Abbreviations and conventions
The PICS proforma contained in this annex is comprised of information in tabular form in accordance with the
guidelines presented in ISO/IEC 9646-7 [4].
Item column
The item column contains a number which identifies the item in the table.
Item description column
The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly
means "is supported by the implementation?".
ETSI

---------------------- Page: 8 ----------------------
9 ETSI TS 102 797-1 V1.2.1 (2014-06)
Status column
The following notations, defined in ISO/IEC 9646-7 [4], are used for the status column:
m mandatory - the capability is required to be supported.
o optional - the capability may be supported or not.
n/a not applicable - in the given context, it is impossible to use the capability.
x prohibited (excluded) - there is a requirement not to use this capability in the given context.
o.i qualified optional - for mutually exclusive or selectable options from a set. "i" is an integer which
identifies a unique group of related optional items and the logic of their selection which is defined
immediately following the table.
ci conditional - the requirement on the capability ("m", "o", "x" or "n/a") depends on the support of
other optional or conditional items. "i" is an integer identifying a unique conditional status
expression which is defined immediately following the table.
Reference column
The reference column makes reference to ISO 24102-4 [1], except where explicitly stated otherwise.
Support column
The support column shall be filled in by the supplier of the implementation. The following common notations, defined
in ISO/IEC 9646-7 [4], are used for the support column:
Y or y supported by the implementation.
N or n not supported by the implementation.
N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional
status).
NOTE: As stated in ISO/IEC 9646-7 [4], support for a received PDU requires the ability to parse all valid
parameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter is non-
conformant. Support for a parameter on a PDU means that the semantics of that parameter are supported.
Values allowed column
The values allowed column contains the type, the list, the range or the length of values allowed. The following notations
are used:
• range of values: .
example: 5 . 20
• list of values: , , .,
example: 2, 4, 6, 8, 9
example: '1101'B, '1011'B, '1111'B
example: '0A'H, '34'H, '2F'H
• list of named values: (), (), ., ()
example: reject(1), accept(2)
• length: size ( . )
example: size (1 . 8)
Values supported column
The values supported column shall be filled in by the supplier of the implementation. In this column, the values or the
ranges of values supported by the implementation shall be indicated.
ETSI

---------------------- Page: 9 ----------------------
10 ETSI TS 102 797-1 V1.2.1 (2014-06)
References to items
For each possible item answer (answer in the support column) within the PICS proforma a unique reference exists,
used, for example, in the conditional expressions. It is defined as the table identifier, followed by a solidus character "/",
followed by the item number in the table. If there is more than one support column in a table, the columns are
discriminated by letters (a, b, etc.), respectively.
EXAMPLE 1: B.5/4 is the reference to the answer of item 4 in table 5 of annex B.
EXAMPLE 2: B.6/3b is the reference to the second answer (i.e. in the second support column) of item 3 in table 6
of annex B.
Prerequisite line
A prerequisite line takes the form: Prerequisite: .
A prerequisite line indicates that the whole table is not required to be completed if the predicate is FALSE.
A.1.3 Instructions for completing the PICS proforma
The supplier of the implementation shall complete the PICS proforma in each of the spaces provided. In particular, an
explicit answer shall be entered, in each of the support or supported column boxes provided, using the notation
described in clause A.1.2.
However, the tables containing in "user role" clause shall only be completed for user implementations, and the tables
containing in "network role" clause shall only be completed for network implementations.
If necessary, the supplier may provide additional comments in space at the bottom of the tables or separately.
More detailed instructions are given at the beginning of the different clauses of the PICS proforma.
A.2 Identification of the implementation
A.2.1 Date of the statement
.
A.2.2 Implementation Under Test (IUT) identification
IUT name:
.
.
IUT version:
.
A.2.3 System Under Test (SUT) identification
SUT name:
.
.
ETSI

---------------------- Page: 10 ----------------------
11 ETSI TS 102 797-1 V1.2.1 (2014-06)
Hardware configuration:
.
.
.
Operating system:
.
A.2.4 Product supplier
Name:
.
Address:
.
.
.
Telephone number:
.
Facsimile number:
.
E-mail address:
.
Additional information:
.
.
.
A.2.5 Client (if different from product supplier)
Name:
.
Address:
.
.
.
Telephone number:
.
ETSI

...