ETSI TS 145 008 V13.2.0 (2016-08)

ETSI TS 1145 008 V13.2.0 (201616-08)

TECHNICAL SPECIFICATIONION
Digital cellular telecommmmunications system (Phase e 2+) (GSM);
Radio s subsystem link control
(3GPP TS 45.0.008 version 13.2.0 Release 13 13)

R
GLOBAL SYSTTEME FOR
MOBILE COMMUUNNICATIONS
3GPP TS 45.008 version 13.2.0 Release 13 1 ETSI TS 145 008 V13.2.0 (2016-08)

Reference
RTS/TSGG-0145008vd20
Keywords
GSM
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3GPP TS 45.008 version 13.2.0 Release 13 2 ETSI TS 145 008 V13.2.0 (2016-08)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
http://webapp.etsi.org/key/queryform.asp.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
3GPP TS 45.008 version 13.2.0 Release 13 3 ETSI TS 145 008 V13.2.0 (2016-08)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 8
1 Scope . 9
1.1 References . 9
1.2 Abbreviations . 11
1.3 Definitions . 11
1.4 Restrictions . 11
2 General . 12
3 Handover . 13
3.1 Overall process . 13
3.2 MS measurement procedure . 13
3.3 BSS measurement procedure . 13
3.4 Strategy . 14
4 RF power control . 14
4.1 Overall process . 14
4.2 MS implementation . 14
4.2.1 General . 14
4.2.2 (EC-)RACH . 15
4.2.2.1 Random access procedure when EC operation is not enabled . 15
4.2.2.2 Random access procedure when EC operation is enabled . 16
4.3 MS power control range . 17
4.4 BSS implementation . 17
4.4.1 VAMOS subchannel power control for BSS in downlink . 17
4.5 BSS power control range . 17
4.6 Strategy . 18
4.7 Timing . 18
4.7.1 Normal Power Control . 18
4.7.2 Fast Power Control . 18
4.7.3 Enhanced Power Control . 19
4.8 Dedicated channels used for a voice group call or voice broadcast. 19
5 Radio link failure . 19
5.1 Criterion . 19
5.2 MS procedure . 20
5.3 BSS procedure . 20
6 Idle mode tasks . 20
6.1 Introduction . 20
6.2 Measurements for normal cell selection . 22
6.3 Measurements for stored list cell selection . 22
6.4 Criteria for cell selection and reselection . 23
6.4.1 C1 path loss criterion . 23
6.4.2 C2 reselection criterion . 24
6.4.3 C4 criteria . 25
6.4.4 Disabling of EC operation . 26
6.5 Downlink signalling failure . 26
6.6 Measurements for Cell Reselection . 26
6.6.0 General . 26
6.6.1 Monitoring of received signal level and BCCH data . 27
6.6.1.1 Applicability. 27
6.6.1.2 Monitoring of received signal level . 27
ETSI
3GPP TS 45.008 version 13.2.0 Release 13 4 ETSI TS 145 008 V13.2.0 (2016-08)
6.6.1.3 Monitoring of BCCH data and BSIC decoding . 27
6.6.1.4 Determination of available PLMNs . 28
6.6.1.5 Requirements for synchronization and reading of BCCH data . 28
6.6.1a Reduced Monitoring of received signal level and (EC-)BCCH data . 28
6.6.1a.1 General . 28
6.6.1a.2 Monitoring of the serving cell . 28
6.6.1a.3 Criteria for triggering measurements for cell re-selection. 29
6.6.1a.4 Monitoring of non-serving cells . 29
6.6.2 Path loss criteria and timings for cell re-selection . 30
6.6.3 Cell reselection algorithm for SoLSA . 31
6.6.4 Measurements on cells of other radio access technologies . 31
6.6.5 Algorithm for cell re-selection from GSM to UTRAN based on cell ranking . 35
6.6.6 Algorithm for inter-RAT cell re-selection based on priority information . 36
6.6.7 Cell selection and re-selection to CSG cells and hybrid cells . 39
6.6.7.1 Cell re-selection to CSG cells . 39
6.6.7.1a Cell re-selection to hybrid cells . 40
6.6.7.2 Manual CSG ID selection . 40
6.7 Release of TCH, SDCCH and DBPSCH . 40
6.7.1 Normal case . 40
6.7.2 Call re-establishment . 41
6.8 Abnormal cases and emergency calls . 41
6.9 RLA_EC signal level and SLA measurements . 42
6.9.1 General . 42
6.9.2 Physical parameters . 42
6.9.3 Statistical parameter . 42
6.9.4 Accuracy requirements . 43
6.9.5 Void . 43
6.9a RLA_GC signal level measurements . 43
6.9a.1 General . 43
6.9a.2 Physical parameter . 43
6.9a.3 Statistical parameter . 43
6.9a.4 Accuracy requirements . 43
6.10 Coverage class selection for EC-GSM-IoT . 43
6.10.1 General . 43
6.10.2 Downlink coverage class selection . 44
6.10.3 Uplink coverage class selection . 44
6.10.4 Coverage class adaptation for EC-CCCH . 45
6.10.5 Downlink coverage class update . 45
7 Network pre-requisites . 45
7.1 BCCH carriers . 45
7.2 Identification of surrounding BSS . 47
7.2.1 General . 47
7.2.2 Identification of surrounding BSS for handover measurements . 47
7.3 Handover measurements on other radio access technologies . 49
7.4 Handover measurements on UTRAN CSG cells and hybrid cells . 52
8 Radio link measurements . 53
8.1 Signal level . 53
8.1.1 General . 53
8.1.2 Physical parameter . 53
8.1.3 Statistical parameters . 54
8.1.4 Range of parameter . 54
8.1.5 Measurement quantity for other radio access technologies . 55
8.1.5.1 UTRAN FDD . 55
8.1.5.2 UTRAN TDD . 55
8.1.5.3 cdma2000 . 55
8.1.5.4 E-UTRAN FDD . 56
8.1.5.5 E-UTRAN TDD . 57
8.2 Signal quality . 57
8.2.1 General . 57
8.2.2 Physical parameter . 57
ETSI
3GPP TS 45.008 version 13.2.0 Release 13 5 ETSI TS 145 008 V13.2.0 (2016-08)
8.2.3 Statistical parameters . 58
8.2.3.1 RXQUAL . 58
8.2.3.2 MEAN_ BEP and CV_BEP . 58
8.2.4 Range of parameter RXQUAL . 59
8.2.5 Range of parameters MEAN_BEP and CV_BEP . 60
8.3 Aspects of discontinuous transmission (DTX) . 64
8.4 Measurement reporting . 65
8.4.1 Measurement reporting for the MS . 65
8.4.1a Measurement reporting for the MS in FPC mode . 67
8.4.1b Measurement reporting for the MS in EPC mode . 67
8.4.2 Measurement reporting for the MS on a SDCCH . 68
8.4.3 Additional cell reporting requirements for multi band MS . 68
8.4.4 Common aspects for the MS on a TCH, a SDCCH or a DBPSCH . 69
8.4.5 Measurement reporting for the BSS . 69
8.4.6 Extended measurement reporting . 70
8.4.7 Additional cell reporting requirements for multi-RAT MS . 70
8.4.8 Enhanced Measurement Reporting . 72
8.4.8.1 Reporting Priority . 72
8.4.8.2 Measurement Reporting . 73
8.4.8.3 NBR_RCVD_BLOCKS for FLO . 74
8.4.9 Requirements for measurement and reporting of CSG cells and hybrid cells . 74
8.5 Absolute MS-BTS distance . 75
8.5.1 General . 75
8.5.2 Physical parameter . 75
9 Control parameters . 76
10 GPRS mode tasks . 85
10.1 Cell Re-selection . 85
10.1.0 General . 85
10.1.1 Monitoring the received signal level and PBCCH data . 86
10.1.1.0 General . 86
10.1.1.1 Packet idle mode or MAC-Idle state . 87
10.1.1.2 Packet transfer mode or MAC-Shared state . 87
10.1.1.2a Broadcast/multicast receive mode . 89
10.1.1.3 Monitoring cells of other radio access technologies . 89
10.1.2 Cell Re-selection Criteria . 93
10.1.3 Cell Re-selection Algorithm . 94
10.1.3.1 Abnormal cell reselection . 95
10.1.3.2 Algorithm for cell re-selection from GSM to UTRAN based on cell ranking . 96
10.1.3.3 Algorithm for inter-RAT cell re-selection based on priority information . 97
10.1.3.4 Cell selection and re-selection to CSG cells and hybrid cells . 97
10.1.4 Network controlled Cell re-selection . 97
10.1.4.1 Measurement reporting . 98
10.1.4.2 Cell re-selection command . 103
10.1.4.3 Exceptional cases . 103
10.1a Measurement and Reporting of CSG Cells and hybrid cells . 103
10.2 RF Power Control . 104
10.2.1 MS output power . 104
10.2.2 BTS output power . 105
10.2.3 Measurements at MS side . 106
10.2.3.1 Deriving the C value . 107
10.2.3.1.1 Packet idle mode or MAC-Idle state . 107
10.2.3.1.2 Packet transfer mode or MAC-Shared state . 107
10.2.3.1.2.1 MS that have not enabled EC operation . 107
10.2.3.1.2.2 MS that have enabled EC operation . 109
10.2.3.2 Derivation of Channel Quality Report . 109
10.2.3.2.1 Packet transfer mode or MAC-Shared state . 110
10.2.3.2.2 Void . 113
10.2.3.2.3 Measurement reporting . 113
10.2.3.2.4 Measurement reporting - additional requirements for downlink dual carrier . 114
10.2.3.2.5 Measurement reporting - additional requirements for downlink multi carrier. 115
ETSI
3GPP TS 45.008 version 13.2.0 Release 13 6 ETSI TS 145 008 V13.2.0 (2016-08)
10.2.3.3 Range of parameters MEAN_BEP and CV_BEP for EGPRS2 . 115
10.2.4 Measurements at BSS side . 119
10.2a Packet-switched Handover . 119
10.3 Measurement requirements . 119
10.4 Control parameters . 119
11 CTS mode tasks . 127
11.1 CTS idle mode tasks . 127
11.1.1 CTS cell selection . 128
11.1.1.1 Synchronization and measurements for CTS cell selection . 128
11.1.1.2 Initial sychronization of CTS-MS . 128
11.1.2 Criterion for CTS cell selection . 128
11.1.3 Monitoring of CTSBCH and CTSPCH . 129
11.1.3.1 Monitoring of received signal level . 129
11.1.3.2 Downlink beacon failure . 129
11.1.3.3 Downlink paging failure . 129
11.1.4 Procedures with reporting to the CTS-FP . 129
11.1.4.1 AFA monitoring . 129
11.1.4.2 BCCH detection . 130
11.1.4.3 Observed Frequency Offset (OFO) measurement . 130
11.2 Intra-cell handover . 130
11.2.1 Overall process . 130
11.2.2 CTS-MS measurement procedure . 130
11.2.3 CTS-FP measurement procedure . 131
11.2.4 Strategy . 131
11.3 RF power control . 131
11.3.1 Overall process . 131
11.3.2 CTS-MS implementation . 131
11.3.3 CTS-MS power control range . 131
11.3.4 CTS-FP implementation . 132
11.3.5 CTS-FP power control range . 132
11.3.6 Strategy . 132
11.3.7 Timing . 132
11.4 Radio link failure . 132
11.4.1 Criterion . 132
11.4.2 CTS-MS procedure . 132
11.4.3 CTS-FP procedure . 133
11.5 Radio link measurements . 133
11.5.1 Signal strength . 133
11.5.1.1 General . 133
11.5.1.2 Physical parameter . 133
11.5.1.3 Statistical parameters . 133
11.5.1.4 Range of parameter . 133
11.5.2 Signal quality . 134
11.5.2.1 General . 134
11.5.2.2 Physical parameter . 134
11.5.2.3 Statistical parameters . 134
11.5.2.4 Range of parameter . 134
11.5.3 Aspects of discontinuous transmission (DTX) . 134
11.5.4 Measurement reporting for the CTS-MS on a TCH . 134
11.6 Control of CTS-FP service range . 135
11.7 Control parameters . 135
12 COMPACT Mode Tasks . 137
12.1 Introduction . 137
12.2 Network Pre-requisites . 137
12.2.1 CPBCCH carriers . 137
12.3 COMPACT Idle Mode Tasks . 137
12.3.1 Introduction. 137
12.3.2 Measurements for COMPACT Cell Selection . 137
12.3.3 Measurements for COMPACT Stored List Cell Selection . 138
12.3.4 Criteria for COMPACT Cell Selection . 138
ETSI
3GPP TS 45.008 version 13.2.0 Release 13 7 ETSI TS 145 008 V13.2.0 (2016-08)
12.3.5 Downlink Signalling Failure . 138
12.4 COMPACT Cell Reselection . 138
12.4.1 Monitoring the received signal level and CPBCCH data . 139
12.4.1.1 Packet idle mode or MAC-Idle state . 139
12.4.1.2 Packet transfer mode or MAC-Shared state . 139
12.4.2 COMPACT cell reselection criteria . 140
12.4.3 COMPACT cell reselection algorithm . 140
12.4.4 Network controlled Cell reselection . 140
12.4.5 COMPACT cell reselection measurement opportunities . 140
Annex A (informative): Definition of a basic GSM or DCS 1 800 handover and RF power
control algorithm . 141
A.1 Scope . 141
A.2 Functional requirement. 141
A.3 BSS pre-processing and threshold comparisons. 142
A.3.1 Measurement averaging process . 142
A.3.2 Threshold comparison process . 143
A.3.2.1 RF power control process . 143
A.3.2.2 Handover Process . 144
A.4 BSS decision algorithm . 145
A.4.1 Internal intracell handover according to radio criteria: (Interference problems) . 145
A.4.2 Internal handover according to other criteria. 146
A.4.3 General considerations . 146
A.5 Channel allocation . 146
A.6 Handover decision algorithm in the MSC . 147
Annex B (informative): Power Control Procedures . 149
B.1 Open loop control .
...