ETSI TR 119 164-1 V1.1.1 (2016-06)

ETSI TR 119 164-1 V1.1.1 (2016-06)






TECHNICAL REPORT
Electronic Signatures and Infrastructures (ESI);
Associated Signature Containers (ASiC) -
Testing Conformance and Interoperability;
Part 1: Overview

---------------------- Page: 1 ----------------------
2 ETSI TR 119 164-1 V1.1.1 (2016-06)



Reference
DTR/ESI-0019164-1
Keywords
ASiC, conformance, e-commerce, electronic
signature, profile, security, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TR 119 164-1 V1.1.1 (2016-06)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 6
4 Testing Conformance and Interoperability . 6
4.1 Part 2: Test suites for testing interoperability of ASiC baseline containers . 6
4.2 Part 3: Test suites for testing interoperability of additional ASiC containers . 7
4.3 Part 4: Testing Conformance for ASiC baseline containers . 7
4.4 Part 5: Testing Conformance for additional ASiC containers . 7
Annex A (informative): Bibliography . 8
History . 9


ETSI

---------------------- Page: 3 ----------------------
4 ETSI TR 119 164-1 V1.1.1 (2016-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Report (TR) has been produced by ETSI Technical Committee Electronic Signatures and Infrastructures
(ESI).
The present document is part 1 of a multi-part deliverable covering ASiC containers - Testing Conformance and
Interoperability, as identified below:
ETSI TR 119 164-1: "Overview";
ETSI TS 119 164-2: "Test suites for testing interoperability of ASiC baseline containers";
ETSI TS 119 164-3: "Test suites for testing interoperability of ASiC containers other than baseline";
ETSI TS 119 164-4: "Testing Conformance of ASiC baseline containers";
ETSI TS 119 164-5: "Testing Conformance of additional ASiC containers.
Modal verbs terminology
In the present document "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be
interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The multi-part deliverable defines test suites for testing interoperability and conformance of ASiC containers. The set of
Technical Specifications consists of four documents.
The test suites for testing interoperability of ASiC baseline containers (Part 2) and the specification required for
building software tools for testing technical conformity of ASiC baseline containers (Part 4) are defined against ETSI
EN 319 162-1 [i.1]. The test suites for testing interoperability of additional ASiC containers (Part 3) and the
specification required for building software tools for testing technical conformity of additional ASiC containers (Part 5)
are defined against ETSI EN 319 162-2 [i.2].
The test suites for testing interoperability of ASiC containers other than baseline (Part 3) and the specifications required
for building software tools for testing technical conformity of ASiC containers other than baseline (Part 5) are defined
against:
• containers based on the building blocks specified in ETSI EN 319 162-1 [i.1], clause 4.3 for ASiC-S
containers and clause 4.4 for ASiC-E containers; and
• additional containers as spedified in ETSI EN 319 162-2 [i.2].
ETSI

---------------------- Page: 4 --------------------
...