ETSI EN 302 372 V2.1.1 (2016-12)

ETSI EN 302 372 V2.1.1 (2016-12)






HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD);
Tank Level Probing Radar (TLPR) equipment operating in the
frequency ranges 4,5 GHz to 7 GHz, 8,5 GHz to 10,6 GHz,
24,05 GHz to 27 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz;
Harmonised Standard covering the essential requirements
of article 3.2 of the Directive 2014/53/EU

---------------------- Page: 1 ----------------------
2 ETSI EN 302 372 V2.1.1 (2016-12)



Reference
REN/ERM-TGUWB-131
Keywords
EHF, harmonised standard, radar, regulation,
SHF, short range, SRD, testing, UWB

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 302 372 V2.1.1 (2016-12)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 8
Introduction . 8
1 Scope . 10
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 11
3 Definitions, symbols and abbreviations . 12
3.1 Definitions . 12
3.2 Symbols . 13
3.3 Abbreviations . 14
4 Technical requirements specifications . 15
4.1 Environmental conditions . 15
4.2 General . 15
4.3 Transmitter conformance requirements . 15
4.3.1 Permitted frequency range of operation . 15
4.3.1.1 Applicability. 15
4.3.1.2 Description . 15
4.3.1.3 Limits . 15
4.3.1.4 Conformance . 15
4.3.2 Operating bandwidth. 16
4.3.2.1 Applicability. 16
4.3.2.2 Description . 16
4.3.2.3 Limits . 16
4.3.2.4 Conformance . 16
4.3.3 Maximum value of mean power spectral density . 16
4.3.4 Maximum value of peak power . 16
4.3.4.1 Applicability. 16
4.3.4.2 Description . 17
4.3.4.3 Limits . 17
4.3.4.4 Conformance . 17
4.3.5 Exterior limits . 17
4.3.6 Low duty cycle . 17
4.3.7 Other emissions . 17
4.3.8 Transmitter unwanted emissions . 17
4.3.8.1 Applicability. 17
4.3.8.2 Description . 17
4.3.8.3 Limits . 18
4.3.8.4 Conformance . 18
4.4 Receiver conformance requirements . 18
4.4.1 General . 18
4.4.2 Receiver spurious emissions . 18
4.4.2.1 Applicability. 18
4.4.2.2 Description . 18
4.4.2.3 Limits . 18
4.4.2.4 Conformance . 19
4.4.3 Interferer signal handling . 19
4.4.3.1 Applicability. 19
4.4.3.2 Description . 19
4.4.3.3 Limits . 19
4.4.3.4 Conformance . 20
4.5 Requirements for spectrum access . 20
4.5.1 Detect and avoid (DAA) . 20
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 302 372 V2.1.1 (2016-12)
4.5.2 Listen-before-talk (LBT) . 20
4.5.3 Low duty cycle (LDC) . 20
4.6 Antenna requirements . 20
4.7 Other requirements and mitigation techniques . 20
4.7.1 General . 20
4.7.2 Adaptive power control (APC) . 21
4.7.3 Activity factor and duty cycle . 21
4.7.3.1 Applicability. 21
4.7.3.2 Description . 21
4.7.3.3 Limits . 22
4.7.3.4 Conformance . 22
4.7.4 Frequency domain mitigation . 22
4.7.4.1 Applicability. 22
4.7.4.2 Description . 23
4.7.4.3 Limits . 23
4.7.4.4 Conformance . 23
4.7.5 Shielding effects . 23
4.7.5.1 Applicability. 23
4.7.5.2 Description . 23
4.7.5.3 Limits . 23
4.7.5.4 Conformance . 23
4.7.6 Thermal radiation . 23
4.7.7 Site registration . 23
4.7.8 Equivalent mitigation techniques . 23
4.7.8.1 Applicability. 23
4.7.8.2 Description . 24
4.7.8.3 Limits . 24
4.7.8.4 Conformance . 24
4.7.9 Range of modulation parameters . 24
4.7.9.1 Applicability. 24
4.7.9.2 Description . 24
4.7.9.3 Limits . 24
4.7.9.4 Conformance . 24
5 Testing for compliance with technical requirements . 24
5.1 Environmental conditions for testing . 24
5.2 General conditions for testing . 25
5.2.1 Product information . 25
5.2.2 Product information useful to facilitate testing . 25
5.2.3 Requirements for the test modulation . 25
5.2.4 Test conditions, power supply and ambient temperatures . 25
5.2.5 Choice of equipment for test suites . 25
5.2.6 Multiple operating bandwidths and multiband equipment . 26
5.2.7 Testing of host connected equipment and plug-in radio devices . 26
5.2.8 Radiated measurement arrangements. 26
5.3 Interpretation of the measurement results . 26
5.3.1 General . 26
5.3.2 Conversion loss data and measurement uncertainty . 27
5.3.3 Measurement uncertainty is equal to or less than maximum acceptable uncertainty . 28
5.3.4 Measurement uncertainty is greater than maximum acceptable uncertainty . 28
5.3.5 Emissions . 28
6 Conformance test suite . 28
6.1 Introduction . 28
6.2 Initial measurement steps . 28
6.3 Radiated measurements . 29
6.3.1 General . 29
6.3.2 Test sites and general arrangements for measurements involving the use of radiated fields . 29
6.3.3 Guidance on the use of a radiation test site . 29
6.3.4 Coupling of signals . 29
6.3.5 Standard test methods . 29
6.3.6 Standard calibration method . 29
ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 302 372 V2.1.1 (2016-12)
6.4 Conducted measurements . 29
6.4.1 General Setup . 29
6.4.2 Specific Setup . 29
6.5 Conformance test suite for transmitter parameters . 29
6.5.1 General . 29
6.5.2 Method of measurements of the Ultra-Wideband emissions . 30
6.5.3 Permitted frequency range of operation . 30
6.5.4 Operating bandwidth. 30
6.5.5 Mean power spectral density measurements . 31
6.5.6 Peak power measurements . 34
6.5.6.1 Description . 34
6.5.6.2 Radiated test procedure . 35
6.5.6.3 Conducted test procedure . 35
6.5.7 Exterior limit measurement. 35
6.5.8 Total Power . 35
6.5.9 Other Emissions . 35
6.6 Conformance test suite for receiver parameters . 35
6.6.1 Receiver spurious emissions . 35
6.6.2 Receiver sensitivity . 35
6.6.3 Interferer signal handling . 35
6.6.3.1 Description . 35
6.6.3.2 Interferer frequencies and power levels . 35
6.6.3.3 Real scenario . 36
6.6.3.4 Equivalent scenario . 37
6.6.3.5 Radiated test setup for the equivalent scenario . 37
6.6.3.6 Conducted test setup for the equivalent scenario . 40
6.6.3.7 Test procedure for the equivalent scenario . 41
6.6.3.8 Alternative scenario . 42
6.6.3.9 Radiated test setup for the alternative scenario . 42
6.6.3.10 Conducted test setup for the alternative scenario . 43
6.6.3.11 Test procedure for the alternative scenario . 44
6.7 Conformance test suites for spectrum access . 45
6.7.1 Detect and avoid mechanisms . 45
6.7.2 Listen before talk . 45
6.7.3 Low duty cycle . 45
6.8 Conformance test suites for antenna requirements . 45
6.9 Other test suites . 45
6.9.1 Adaptive power control (APC) . 45
6.9.2 Activity factor and duty cycle . 45
6.9.3 Frequency domain mitigation . 45
6.9.4 Shielding effects . 45
6.9.5 Thermal radiations . 46
6.9.6 Site registration . 46
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 47
Annex B (informative): Application form for testing . 48
B.1 Introduction . 48
B.2 General information as required by ETSI EN 302 372, clause 5.2 . 48
B.2.1 Type of equipment (stand-alone, combined, plug-in radio device, etc.) . 48
B.2.2 The nominal voltages of the stand-alone radio equipment or the nominal voltages of the combined
(host) equipment or test jig in case of plug-in devices . 48
B.3 Signal related information as required by ETSI EN 302 372, clause 4.3 . 49
B.3.1 Introduction . 49
B.3.2 Operational frequency range(s) of the equipment . 49
B.3.3 Nominal channel bandwidth(s) . 49
B.3.4 The type of modulation used by the equipment. 49
B.3.5 The worst case mode for each of the following tests . 49
ETSI

---------------------- Page: 5 ----------------------
...

Final draft ETSI EN 302 372 V2.1.1 (2016-10)






HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD);
Tank Level Probing Radar (TLPR) equipment operating in the
frequency ranges 4,5 GHz to 7 GHz, 8,5 GHz to 10,6 GHz,
24,05 GHz to 27 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz;
Harmonised Standard covering the essential requirements
of article 3.2 of the Directive 2014/53/EU

---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 302 372 V2.1.1 (2016-10)



Reference
REN/ERM-TGUWB-131
Keywords
EHF, harmonised standard, radar, regulation,
SHF, short range, SRD, testing, UWB

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 302 372 V2.1.1 (2016-10)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 8
Introduction . 8
1 Scope . 10
2 References . 11
2.1 Normative references . 11
2.2 Informative references . 11
3 Definitions, symbols and abbreviations . 12
3.1 Definitions . 12
3.2 Symbols . 13
3.3 Abbreviations . 14
4 Technical requirements specifications . 15
4.1 Environmental conditions . 15
4.2 General . 15
4.3 Transmitter conformance requirements . 15
4.3.1 Permitted frequency range of operation . 15
4.3.1.1 Applicability. 15
4.3.1.2 Description . 15
4.3.1.3 Limits . 15
4.3.1.4 Conformance . 16
4.3.2 Operating bandwidth. 16
4.3.2.1 Applicability. 16
4.3.2.2 Description . 16
4.3.2.3 Limits . 16
4.3.2.4 Conformance . 16
4.3.3 Maximum value of mean power spectral density . 17
4.3.4 Maximum value of peak power . 17
4.3.4.1 Applicability. 17
4.3.4.2 Description . 17
4.3.4.3 Limits . 17
4.3.4.4 Conformance . 17
4.3.5 Exterior limits . 17
4.3.6 Low duty cycle . 17
4.3.7 Other emissions . 17
4.3.8 Transmitter unwanted emissions . 18
4.3.8.1 Applicability. 18
4.3.8.2 Description . 18
4.3.8.3 Limits . 18
4.3.8.4 Conformance . 18
4.4 Receiver conformance requirements . 18
4.4.1 General . 18
4.4.2 Receiver spurious emissions . 18
4.4.2.1 Applicability. 18
4.4.2.2 Description . 19
4.4.2.3 Limits . 19
4.4.2.4 Conformance . 19
4.4.3 Interferer signal handling . 19
4.4.3.1 Applicability. 19
4.4.3.2 Description . 19
4.4.3.3 Limits . 20
4.4.3.4 Conformance . 20
4.5 Requirements for spectrum access . 20
4.5.1 Detect and avoid (DAA) . 20
ETSI

---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 302 372 V2.1.1 (2016-10)
4.5.2 Listen-before-talk (LBT) . 20
4.5.3 Low duty cycle (LDC) . 21
4.6 Antenna requirements . 21
4.7 Other requirements and mitigation techniques . 21
4.7.1 General . 21
4.7.2 Adaptive power control (APC) . 21
4.7.3 Activity factor and duty cycle . 21
4.7.3.1 Applicability. 21
4.7.3.2 Description . 21
4.7.3.3 Limits . 22
4.7.3.4 Conformance . 22
4.7.4 Frequency domain mitigation . 23
4.7.4.1 Applicability. 23
4.7.4.2 Description . 23
4.7.4.3 Limits . 23
4.7.4.4 Conformance . 23
4.7.5 Shielding effects . 23
4.7.5.1 Applicability. 23
4.7.5.2 Description . 23
4.7.5.3 Limits . 23
4.7.5.4 Conformance . 23
4.7.6 Thermal radiation . 23
4.7.7 Site registration . 23
4.7.8 Equivalent mitigation techniques . 24
4.7.8.1 Applicability. 24
4.7.8.2 Description . 24
4.7.8.3 Limits . 24
4.7.8.4 Conformance . 24
4.7.9 Range of modulation parameters . 24
4.7.9.1 Applicability. 24
4.7.9.2 Description . 24
4.7.9.3 Limits . 24
4.7.9.4 Conformance . 24
5 Testing for compliance with technical requirements . 25
5.1 Environmental conditions for testing . 25
5.2 General conditions for testing . 25
5.2.1 Product information . 25
5.2.2 Product information useful to facilitate testing . 25
5.2.3 Requirements for the test modulation . 25
5.2.4 Test conditions, power supply and ambient temperatures . 25
5.2.5 Choice of equipment for test suites . 25
5.2.6 Multiple operating bandwidths and multiband equipment . 26
5.2.7 Testing of host connected equipment and plug-in radio devices . 26
5.2.8 Radiated measurement arrangements. 26
5.3 Interpretation of the measurement results . 26
5.3.1 General . 26
5.3.2 Conversion loss data and measurement uncertainty . 27
5.3.3 Measurement uncertainty is equal to or less than maximum acceptable uncertainty . 28
5.3.4 Measurement uncertainty is greater than maximum acceptable uncertainty . 28
5.3.5 Emissions . 28
6 Conformance test suite . 28
6.1 Introduction . 28
6.2 Initial measurement steps . 28
6.3 Radiated measurements . 29
6.3.1 General . 29
6.3.2 Test sites and general arrangements for measurements involving the use of radiated fields . 29
6.3.3 Guidance on the use of a radiation test site . 29
6.3.4 Coupling of signals . 29
6.3.5 Standard test methods . 29
6.3.6 Standard calibration method . 29
ETSI

---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 302 372 V2.1.1 (2016-10)
6.4 Conducted measurements . 29
6.4.1 General Setup . 29
6.4.2 Specific Setup . 29
6.5 Conformance test suite for transmitter parameters . 29
6.5.1 General . 29
6.5.2 Method of measurements of the Ultra-Wideband emissions . 30
6.5.3 Permitted frequency range of operation . 30
6.5.4 Operating bandwidth. 30
6.5.5 Mean power spectral density measurements . 32
6.5.6 Peak power measurements . 34
6.5.6.1 Description . 34
6.5.6.2 Radiated test procedure . 35
6.5.6.3 Conducted test procedure . 35
6.5.7 Exterior limit measurement. 35
6.5.8 Total Power . 35
6.5.9 Other Emissions . 35
6.6 Conformance test suite for receiver parameters . 35
6.6.1 Receiver spurious emissions . 35
6.6.2 Receiver sensitivity . 35
6.6.3 Interferer signal handling . 35
6.6.3.1 Description . 35
6.6.3.2 Interferer frequencies and power levels . 35
6.6.3.3 Real scenario . 36
6.6.3.4 Equivalent scenario . 37
6.6.3.5 Radiated test setup for the equivalent scenario . 37
6.6.3.6 Conducted test setup for the equivalent scenario . 40
6.6.3.7 Test procedure for the equivalent scenario . 41
6.6.3.8 Alternative scenario . 42
6.6.3.9 Radiated test setup for the alternative scenario . 42
6.6.3.10 Conducted test setup for the alternative scenario . 43
6.6.3.11 Test procedure for the alternative scenario . 44
6.7 Conformance test suites for spectrum access . 45
6.7.1 Detect and avoid mechanisms . 45
6.7.2 Listen before talk . 45
6.7.3 Low duty cycle . 45
6.8 Conformance test suites for antenna requirements . 45
6.9 Other test suites . 45
6.9.1 Adaptive power control (APC) . 45
6.9.2 Activity factor and duty cycle . 45
6.9.3 Frequency domain mitigation . 45
6.9.4 Shielding effects . 45
6.9.5 Thermal radiations . 46
6.9.6 Site registration . 46
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 47
Annex B (informative): Application form for testing . 48
B.1 Introduction . 48
B.2 General information as required by ETSI EN 302 372, clause 5.2 . 48
B.2.1 Type of equipment (stand-alone, combined, plug-in radio device, etc.) . 48
B.2.2 The nominal voltages of the stand-alone radio equipment or the nominal voltages of the combined
(host) equipment or test jig in case of plug-in devices . 48
B.3 Signal related information as required by ETSI EN 302 372, clause 4.3 . 49
B.3.1 Introduction . 49
B.3.2 Operational frequency range(s) of the equipment . 49
B.3.3 Nominal channel bandwidth(s) . 49
B.3.4 The type of modulation used by the equipment. 49
B.3.5 The worst case mode for each of the following tests . 49
ETSI
...

Draft ETSI EN 302 372 V2.1.0 (2016-04)






HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD);
Tank Level Probing Radar (TLPR) equipment operating in the
frequency ranges 4,5 GHz to 7 GHz, 8,5 GHz to 10,6 GHz,
24,05 GHz to 27 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz;
Harmonised Standard covering the essential requirements
of article 3.2 of the Directive 2014/53/EU

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 302 372 V2.1.0 (2016-04)



Reference
REN/ERM-TGUWB-131
Keywords
EHF, harmonised standard, radar, regulation,
SHF, short range, SRD, testing, UWB

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 302 372 V2.1.0 (2016-04)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 8
Introduction . 8
1 Scope . 10
2 References . 11
2.1 Normative references . 11
2.2 Informative references . 11
3 Definitions, symbols and abbreviations . 12
3.1 Definitions . 12
3.2 Symbols . 13
3.3 Abbreviations . 14
4 Technical requirements specifications . 15
4.1 Environmental conditions . 15
4.2 General . 15
4.3 Transmitter conformance requirements . 15
4.3.1 Permitted frequency range of operation . 15
4.3.1.1 Applicability. 15
4.3.1.2 Description . 15
4.3.1.3 Limits . 15
4.3.1.4 Conformance . 16
4.3.2 Operating bandwidth. 16
4.3.2.1 Applicability. 16
4.3.2.2 Description . 16
4.3.2.3 Limits . 16
4.3.2.4 Conformance . 16
4.3.3 Maximum value of mean power spectral density . 17
4.3.4 Maximum value of peak power . 17
4.3.4.1 Applicability. 17
4.3.4.2 Description . 17
4.3.4.3 Limits . 17
4.3.4.4 Conformance . 17
4.3.5 Exterior limits . 17
4.3.6 Low duty cycle . 17
4.3.7 Other emissions . 17
4.3.8 Transmitter unwanted emissions . 17
4.3.8.1 Applicability. 17
4.3.8.2 Description . 18
4.3.8.3 Limits . 18
4.3.8.4 Conformance . 18
4.4 Receiver conformance requirements . 18
4.4.1 Receiver requirements . 18
4.4.2 Receiver spurious emissions . 18
4.4.2.1 Applicability. 18
4.4.2.2 Description . 18
4.4.2.3 Limits . 18
4.4.2.4 Conformance . 19
4.4.3 Interferer signal handling . 19
4.4.3.1 Applicability. 19
4.4.3.2 Description . 19
4.4.3.3 Limits . 20
4.4.3.4 Conformance . 20
4.5 Requirements for spectrum access . 20
4.5.1 Detect and avoid (DAA) . 20
ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 302 372 V2.1.0 (2016-04)
4.5.2 Listen-before-talk (LBT) . 20
4.5.3 Low duty cycle (LDC) . 20
4.6 Antenna requirements . 20
4.7 Other requirements and mitigation techniques . 21
4.7.1 General . 21
4.7.2 Adaptive power control (APC) . 21
4.7.3 Activity factor and duty cycle . 21
4.7.3.1 Applicability. 21
4.7.3.2 Description . 21
4.7.3.3 Limits . 22
4.7.3.4 Conformance . 22
4.7.4 Frequency domain mitigation . 22
4.7.4.1 Applicability. 22
4.7.4.2 Description . 23
4.7.4.3 Limits . 23
4.7.4.4 Conformance . 23
4.7.5 Shielding effects . 23
4.7.5.1 Applicability. 23
4.7.5.2 Description . 23
4.7.5.3 Limits . 23
4.7.5.4 Conformance . 23
4.7.6 Thermal radiation . 23
4.7.7 Site registration . 23
4.7.8 Equivalent mitigation techniques . 23
4.7.8.1 Applicability. 23
4.7.8.2 Description . 23
4.7.8.3 Limits . 24
4.7.8.4 Conformance . 24
4.7.9 Range of modulation parameters . 24
4.7.9.1 Applicability. 24
4.7.9.2 Description . 24
4.7.9.3 Limits . 24
4.7.9.4 Conformance . 24
5 Testing for compliance with technical requirements . 24
5.1 Environmental conditions for testing . 24
5.2 General conditions for testing . 24
5.2.1 Product information . 24
5.2.2 Product information useful to facilitate testing . 24
5.2.3 Requirements for the test modulation . 25
5.2.4 Test conditions, power supply and ambient temperatures . 25
5.2.5 Choice of equipment for test suites . 25
5.2.6 Multiple operating bandwidths and multiband equipment . 25
5.2.7 Testing of host connected equipment and plug-in radio devices . 25
5.2.8 Radiated measurement arrangements. 26
5.3 Interpretation of the measurement results . 26
5.3.1 General . 26
5.3.2 Conversion loss data and measurement uncertainty . 27
5.3.3 Measurement uncertainty is equal to or less than maximum acceptable uncertainty . 28
5.3.4 Measurement uncertainty is greater than maximum acceptable uncertainty . 28
5.3.5 Emissions . 28
6 Conformance test suite . 28
6.1 Introduction . 28
6.2 Initial measurement steps . 28
6.3 Radiated measurements . 28
6.3.1 General . 28
6.3.2 Test sites and general arrangements for measurements involving the use of radiated fields . 29
6.3.3 Guidance on the use of a radiation test site . 29
6.3.4 Coupling of signals . 29
6.3.5 Standard test methods . 29
6.3.6 Standard calibration method . 29
ETSI

---------------------- Page: 4 ----------------------
5 Draft ETSI EN 302 372 V2.1.0 (2016-04)
6.4 Conducted measurements . 29
6.4.1 General Setup . 29
6.4.2 Specific Setup . 29
6.5 Conformance test suite for transmitter parameters . 29
6.5.1 General . 29
6.5.2 Method of measurements of the Ultra-Wideband emissions . 29
6.5.3 Permitted frequency range of operation . 29
6.5.4 Operating bandwidth. 30
6.5.5 Mean power spectral density measurements . 31
6.5.6 Peak power measurements . 33
6.5.6.1 Description . 33
6.5.6.2 Radiated test procedure . 34
6.5.6.3 Conducted test procedure . 34
6.5.7 Exterior limit measurement. 34
6.5.8 Total Power . 34
6.5.9 Other Emissions . 34
6.6 Conformance test suite for receiver parameters . 34
6.6.1 Receiver spurious emissions . 34
6.6.2 Receiver sensitivity . 34
6.6.3 Interferer signal handling . 35
6.6.3.1 Description . 35
6.6.3.2 Interferer frequencies and power levels . 35
6.6.3.3 Real scenario . 35
6.6.3.4 Equivalent scenario . 36
6.6.3.5 Radiated test setup for the equivalent scenario . 36
6.6.3.6 Conducted test setup for the equivalent scenario . 39
6.6.3.7 Test procedure for the equivalent scenario . 40
6.6.3.8 Alternative scenario . 41
6.6.3.9 Radiated test setup for the alternative scenario . 42
6.6.3.10 Conducted test setup for the alternative scenario . 42
6.6.3.11 Test procedure for the alternative scenario . 43
6.7 Conformance test suites for spectrum access . 43
6.7.1 Detect and avoid mechanisms . 43
6.7.2 Listen before talk . 44
6.7.3 Low duty cycle . 44
6.8 Conformance test suites for antenna requirements . 44
6.9 Other test suites . 44
6.9.1 Adaptive power control (APC) . 44
6.9.2 Activity factor and duty cycle . 44
6.9.3 Frequency domain mitigation . 44
6.9.4 Shielding effects . 44
6.9.5 Thermal radiations . 44
6.9.6 Site registration . 44
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 45
Annex B (informative): Application form for testing . 46
B.1 Introduction . 46
B.2 General information as required by ETSI EN 302 372, clause 5.2 . 46
B.2.1 Type of equipment (stand-alone, combined, plug-in radio device, etc.) . 46
B.2.2 The nominal voltages of the stand-alone radio equipment or the nominal voltages of the combined
(host) equipment or test jig in case of plug-in devices . 46
B.3 Signal related information as required by ETSI EN 302 372, clause 5.3 . 47
B.3.1 Introduction . 47
B.3.2 Operational frequency range(s) of the equipment . 47
B.3.3 Nominal channel bandwidth(s) . 47
B.3.4 The type of modulation used by the equipment. 47
B.3.5 The worst case mode for each of the following tests . 47
ETSI

---------------------- Page: 5 ---
...