ETSI EN 303 203 V2.1.1 (2015-11)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.UDPHWURY(8Short Range Devices (SRD) - Medical Body Area Network Systems (MBANSs) operating in the 2 483,5 MHz to 2 500 MHz range - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU35.240.80Uporabniške rešitve IT v zdravstveni tehnikiIT applications in health care technology33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 303 203 V2.1.1SIST EN 303 203 V2.1.1:2016en01-marec-2016SIST EN 303 203 V2.1.1:2016SLOVENSKI
STANDARD



SIST EN 303 203 V2.1.1:2016



ETSI EN 303 203 V2.1.1 (2015-11) Short Range Devices (SRD); Medical Body Area Network Systems (MBANSs) operating in the 2 483,5 MHz to 2 500 MHz range; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU
HARMONISED EUROPEAN STANDARD SIST EN 303 203 V2.1.1:2016



ETSI ETSI EN 303 203 V2.1.1 (2015-11) 2
Reference REN/ERM-TG30-311 Keywords health, network, radio, regulation, SRD, system ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2015. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 303 203 V2.1.1:2016



ETSI ETSI EN 303 203 V2.1.1 (2015-11) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Modal verbs terminology . 6 Introduction . 7 1 Scope . 8 2 References . 8 2.1 Normative references . 8 2.2 Informative references . 8 3 Definitions, symbols and abbreviations . 9 3.1 Definitions . 9 3.2 Symbols . 11 3.3 Abbreviations . 11 4 Technical requirements and specifications . 12 4.1 Environmental profile . 12 4.2 Conformance requirements . 12 4.2.1 Transmitter requirements . 12 4.2.1.1 Frequency Error . 12 4.2.1.1.1 Definition. 12 4.2.1.1.2 Limits . 12 4.2.1.1.3 Conformance . 12 4.2.1.2 Emission bandwidth . 12 4.2.1.2.1 Definition. 12 4.2.1.2.2 Limits . 12 4.2.1.2.3 Conformance . 12 4.2.1.3 Effective isotropic radiated power . 12 4.2.1.3.1 Definition. 12 4.2.1.3.2 Limits . 12 4.2.1.3.3 Conformance . 13 4.2.1.4 Spurious emissions . 13 4.2.1.4.1 Definition. 13 4.2.1.4.2 Limits . 13 4.2.1.4.3 Conformance . 13 4.2.1.5 Out-of-band emissions . 13 4.2.1.5.1 Definition. 13 4.2.1.5.2 Limits . 13 4.2.1.5.3 Conformance . 13 4.2.1.6 Frequency stability under low voltage conditions . 14 4.2.1.6.0 Applicability . 14 4.2.1.6.1 Definition. 14 4.2.1.6.2 Limits . 14 4.2.1.6.3 Conformance . 14 4.2.1.7 Duty cycle . 14 4.2.1.7.0 General remarks. 14 4.2.1.7.1 Definition. 14 4.2.1.7.2 Limits . 14 4.2.1.7.3 Conformance . 14 4.2.2 Receiver requirements . 15 4.2.2.1 Spurious radiation . 15 4.2.2.1.1 Definition. 15 4.2.2.1.2 Limits . 15 4.2.2.1.3 Conformance . 15 4.2.2.2 Receiver blocking . 15 4.2.2.2.1 Definition. 15 4.2.2.2.2 Limits . 15 SIST EN 303 203 V2.1.1:2016



ETSI ETSI EN 303 203 V2.1.1 (2015-11) 4 4.2.2.2.3 Conformance . 15 4.2.3 Spectrum access . 15 4.2.3.0 General requirements . 15 4.2.3.1 LBT threshold power level . 17 4.2.3.1.1 Definition. 17 4.2.3.1.2 Limits . 17 4.2.3.1.3 Conformance . 17 4.2.3.2 Monitoring system bandwidth . 17 4.2.3.2.0 General remarks. 17 4.2.3.2.1 Definition. 17 4.2.3.2.2 Limits . 17 4.2.3.2.3 Conformance . 17 4.2.3.3 Minimum channel monitoring period . 17 4.2.3.3.0 General remarks. 17 4.2.3.3.1 Definition. 17 4.2.3.3.2 Limits . 17 4.2.3.3.3 Conformance . 18 4.2.3.4 Channel access based on ambient levels relative to the calculated access LBT threshold level, PTh . 18 4.2.3.4.0 General requirements . 18 4.2.3.4.1 Conformance . 18 4.3 Mechanical and electrical design . 18 4.3.1 General . 18 4.3.2 Controls . 18 4.3.3 Transmitter shut-off facility . 18 5 Testing for compliance with technical requirements . 18 5.1 Environmental conditions for testing . 18 5.1.0 General requirements . 18 5.1.1 Presentation for testing . 19 5.1.1.0 General provisions . 19 5.1.1.1 Choice of model for testing . 19 5.1.1.2 Spurious emission testing for composite equipment . 19 5.1.1.3 Testing of equipment with alternative power levels . 19 5.1.1.4 Presentation of equipment that does not have an external RF connector (equipment with an integral antenna) . 20 5.1.1.4.1 Equipment with a permanent or temporary internal antenna connector . 20 5.1.1.4.2 Equipment with a temporary antenna connector . 20 5.1.2 Declarations by the applicant . 20 5.1.3 Auxiliary test equipment . 20 5.1.4 Test conditions . 20 5.1.4.1 Normal and extreme test conditions . 20 5.1.4.2 Test power source . 20 5.1.4.2.0 General requirements . 20 5.1.4.2.1 External test power source . 20 5.1.4.2.2 Internal test power source . 21 5.1.4.3 Normal test conditions . 21 5.1.4.3.1 Normal temperature and humidity . 21 5.1.4.3.2 Normal test power source . 21 5.1.4.4 Extreme test conditions . 21 5.1.4.4.1 Extreme temperatures . 21 5.1.4.4.2 Extreme test source voltages . 23 5.1.4.5 Normal test signals and test modulation. 23 5.1.4.5.0 General requirements . 23 5.1.4.5.1 Normal modulation test signals for data . 23 5.1.4.6 Antennas . 23 5.1.4.7 Test fixture . 23 5.1.4.8 Test sites and general arrangements for radiated measurements . 24 5.1.4.9 Modes of operation of the transmitter . 24 5.1.4.10 Measuring receiver . 24 5.1.4.11 General remarks on configuration for transmitter measurements . 25 5.1.4.12 General remarks on configuration for receiver measurements . 25 5.1.4.13 General remarks on configuration for monitoring system measurements . 26 SIST EN 303 203 V2.1.1:2016



ETSI ETSI EN 303 203 V2.1.1 (2015-11) 5 5.2 Interpretation of the measurement results . 26 5.3 Methods of measurement . 27 5.3.1 Frequency error . 27 5.3.1.0 General requirements . 27 5.3.1.1 Method of measurement for systems with an unmodulated carrier frequency operating mode . 27 5.3.1.2 Method of measurement for systems with a modulated output frequency . 27 5.3.2 Emission bandwidth . 28 5.3.3 Effective isotropic radiated power . 28 5.3.4 Transmitter spurious emissions . 29 5.3.5 Out-of-band emissions . 30 5.3.6 Frequency stability under low voltage conditions . 32 5.3.7 Receiver spurious emissions . 32 5.3.8 LBT threshold power level . 33 5.3.8.0 General remarks . 33 5.3.8.1 Measurement method using frequency administration commands . 33 5.3.8.2 Results based on the above test method . 33 5.3.9 Minimum channel monitoring period . 33 5.3.9.0 General remarks . 33 5.3.9.1 Measurement method using frequency administration commands . 33 5.3.9.2 Results based on the above test method . 34 5.3.10 Channel access based on ambient levels relative to the calculated access LBT threshold level, PTh . 34 5.3.10.0 Initial steps . 34 5.3.10.1 Accessing an unoccupied channel . 34 5.3.10.2 Results accessing an unoccupied channel . 34 5.3.10.3 Accessing the Least Interfered Channel . 34 5.3.10.4 Results accessing the Least Interfered Channel . 34 5.3.11 Receiver blocking . 34 5.3.11.0 General remarks . 34 5.3.11.1 Measurement method using frequency administration commands . 35 5.3.11.2 Results based on the above test method . 35 Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 36 Annex B (normative): Radiated measurements . 37 B.1 Test sites and arrangements for radiated measurements . 37 B.1.1 Outdoor test site . 37 B.1.2 Indoor test site . 37 B.1.3 Shielded anechoic test site . 38 B.2 Antennas . 40 B.2.1 Test antenna . 40 B.2.2 Substitution antenna . 40 B.3 Test practice and auxiliary test equipment . 41 B.3.0 General requirements . 41 B.3.1 Measuring distance . 41 B.3.2 Auxiliary cables . 41 Annex C (informative): Bibliography . 42 History . 43
SIST EN 303 203 V2.1.1:2016



ETSI ETSI EN 303 203 V2.1.1 (2015-11) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared in reply to the Commission's standardisation request Commission Implementing Decision C(2015) 5376 final of 04.08.2015 to provide a means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment - also known as the Radio Equipment Directive [i.3]. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations.
The present document covers
...