ETSI EN 302 217-2 V3.4.1 (2025-07)

HARMONISED EUROPEAN STANDARD
Fixed Radio Systems;
Characteristics and requirements for
point-to-point equipment and antennas;
Part 2: Digital systems operating in frequency bands
from 1 GHz to 174,8 GHz;
Harmonised Standard for access to radio spectrum

2 ETSI EN 302 217-2 V3.4.1 (2025-07)

Reference
REN/ATTM-0458
Keywords
antenna, DFRS, digital, DRRS, FWS,
point-to-point, radio, regulation, transmission

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2025.
All rights reserved.
ETSI
3 ETSI EN 302 217-2 V3.4.1 (2025-07)
Contents
Intellectual Property Rights . 9
Foreword . 9
Modal verbs terminology . 10
Introduction . 10
1 Scope . 11
2 References . 11
2.1 Normative references . 11
2.2 Informative references . 12
3 Definition of terms, symbols and abbreviations . 15
3.1 Terms . 15
3.2 Symbols . 15
3.3 Abbreviations . 16
4 Technical requirements specifications . 16
4.0 Basic understanding of all requirements . 16
4.1 Framework for categorization of system . 17
4.1.0 Requirement selection . 17
4.1.1 Introduction and equipment flexibility . 17
4.1.2 Operating frequency bands and channel arrangements . 18
4.1.3 Spectral efficiency classes . 18
4.1.4 System alternatives . 19
4.1.5 Channel arrangements and utilization . 19
4.1.6 Specific requirements for frequency bands . 20
4.1.7 Minimum RIC density for spectral efficiency class selection . 21
4.1.8 System identification and traffic loading . 22
4.1.9 Environmental profile . 23
4.2 Transmitter requirements . 23
4.2.0 General: system loading . 23
4.2.1 Transmitter power and power environmental variation . 24
4.2.1.1 Transmitter maximum power and EIRP . 24
4.2.1.2 Transmitter combined nominal output power and EIRP limits . 24
4.2.1.3 Transmitter output power environmental variation . 24
4.2.2 Transmitter power and frequency control . 25
4.2.2.1 Transmitter Power and Frequency Control (ATPC, RTPC and RFC) . 25
4.2.2.1.0 General background . 25
4.2.2.1.1 Automatic Transmit Power Control (ATPC) . 25
4.2.2.1.2 Remote Transmit Power Control (RTPC) . 25
4.2.2.1.3 Transmitter Remote Frequency Control (RFC) . 25
4.2.3 Transmitter Radio Frequency (RF) spectrum mask . 25
4.2.3.1 Limits background . 25
4.2.3.2 Limits . 29
4.2.4 Transmitter discrete CW components exceeding the transmitter Radio Frequency spectrum mask
limit . 41
4.2.4.1 Transmitter discrete CW components at the symbol rate . 41
4.2.4.2 Transmitter other discrete CW components exceeding the transmitter Radio Frequency spectrum
mask limit . 41
4.2.5 Transmitter unwanted emissions in the spurious domain . 42
4.2.6 Transmitter dynamic Change of Modulation Order . 43
4.2.7 Transmitter Frequency stability . 44
4.2.8 Transmitter emission limitations outside the allocated band . 44
4.3 Receiver requirements . 44
4.3.0 General: System loading . 44
4.3.1 Receiver unwanted emissions in the spurious domain. 45
4.3.2 BER as a function of Receiver input Signal Level (RSL). 45
4.3.3 Receiver selectivity . 46
ETSI
4 ETSI EN 302 217-2 V3.4.1 (2025-07)
4.3.3.1 Introduction . 46
4.3.3.2 Receiver co-channel, first and second adjacent channel interference sensitivity . 46
4.3.3.2.1 Requirements basic . 46
4.3.3.2.2 Limits for co-channel and first adjacent channel interference sensitivity . 47
4.3.3.2.3 Limits for second adjacent channel interference sensitivity . 47
4.3.3.3 Receiver Blocking (CW spurious interference sensitivity) . 48
4.4 Antenna Characteristics . 48
4.4.1 Integral antennas or dedicated antennas. 48
4.4.1.1 Introduction . 48
4.4.1.2 Radiation Pattern Envelope (Off-axis EIRP density) . 48
4.4.1.3 Antenna gain . 49
4.4.1.4 Antenna Cross-Polar Discrimination (XPD) . 49
4.4.2 Guidelines for stand-alone antennas . 49
5 Testing for compliance with technical requirements . 49
5.1 Environmental and other conditions for testing . 49
5.1.1 Environmental conditions . 49
5.1.1.1 Generality . 49
5.1.1.2 Minimum profile for equipment indoor use . 50
5.1.1.3 Minimum profile for equipment outdoor use . 50
5.1.2 Testing of equipment and antenna combination . 50
5.1.3 Other basic conditions . 50
5.2 Test methods for the transmitter . 51
5.2.0 General test summary . 51
5.2.1 Transmitter power and power environmental variation . 52
5.2.1.1 Transmitter maximum power and EIRP . 52
5.2.1.2 Transmitter combined nominal output power and EIRP limits . 53
5.2.1.3 Transmitter output power environmental variation . 53
5.2.2 Transmitter power and frequency control . 53
5.2.2.1 Transmitter Power and Frequency Control (ATPC, RTPC and RFC) . 53
5.2.2.1.1 Automatic Transmit Power Control (ATPC) . 53
5.2.2.1.2 Remote Transmit Power Control (RTPC) . 53
5.2.2.1.3 Transmitter Remote Frequency Control (RFC) . 54
5.2.3 Transmitter Radio Frequency spectrum mask. 54
5.2.4 Transmitter discrete CW components exceeding the transmitter Radio Frequency spectrum mask
limit . 54
5.2.5 Transmitter unwanted emissions in the spurious domain . 54
5.2.6 Transmitter dynamic Change of Modulation Order . 55
5.2.7 Transmitter Radio Frequency stability . 55
5.2.8 Transmitter emission limitations outside the allocated band . 55
5.3 Test methods for the receiver . 55
5.3.0 General test summary . 55
5.3.1 Receiver unwanted emissions in the spurious domain . 56
5.3.2 BER as a function of Receiver input Signal Level (RSL). 56
5.3.3 Receiver selectivity . 57
5.3.3.1 Void. 57
5.3.3.2 Receiver co-channel, first and second adjacent channel interference sensitivity . 57
5.3.3.2.1 Void . 57
5.3.3.2.2 Receiver co-channel and first adjacent channel . 57
5.3.3.2.3 Receiver second adjacent channel . 57
5.3.3.3 Receiver Blocking (CW spurious interference sensitivity) . 57
5.4 Antenna test methods . 58
5.4.1 Integral antennas or dedicated antenna . 58
5.4.1.1 Summary . 58
5.4.1.2 Radiation Pattern Envelope (Off-axis EIRP density) . 58
5.4.1.3 Antenna gain . 58
5.4.1.4 Antenna Cross-Polar Discrimination (XPD) . 58
5.4.2 Information on stand-alone antennas tests . 58
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 59
ETSI
5 ETSI EN 302 217-2 V3.4.1 (2025-07)
Annex B (normative): Frequency bands from 1,4 GHz to 2,6 GHz . 61
B.1 Introduction . 61
B.2 General characteristics . 61
B.2.1 Frequency characteristics and channel arrangements . 61
B.2.2 Transmission capacities . 62
B.3 Transmitter . 63
B.3.1 General requirements . 63
B.3.2 Transmitter Radio Frequency spectrum masks options . 63
B.4 Receiver . 64
B.4.1 General requirements . 64
B.4.2 BER as a function of Receiver input Signal Level (RSL) . 64
B.4.3 Receiver co-channel, first and second adjacent channels interference sensitivity . 65
Annex C (normative): Frequency bands from 3,5 GHz to 11 GHz (channel separation up to
30 MHz, 56/60 MHz and 112 MHz) . 66
C.1 Introduction . 66
C.2 General characteristics . 66
C.2.1 Frequency characteristics and channel arrangements . 66
C.2.2 Transmission capacities . 68
C.3 Transmitter . 68
C.3.1 General requirements . 68
C.3.2 Transmitter Radio Frequency (RF) spectrum masks . 68
C.4 Receiver . 69
C.4.1 General requirements . 69
C.4.2 BER as a function of Receiver input Signal Level (RSL) . 69
C.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 71
Annex D (normative): Frequency bands from 4 GHz to 11 GHz (channel separation 40 MHz
and 80 MHz) . 73
D.1 Introduction . 73
D.2 General characteristics . 73
D.2.1 Frequency characteristics and channel arrangements . 73
D.2.2 Transmission capacities . 74
D.3 Transmitter . 75
D.3.1 General requirements . 75
D.3.2 Transmitter Radio Frequency spectrum masks. 75
D.4 Receiver . 75
D.4.1 General requirements . 75
D.4.2 BER as a function of Receiver input Signal Level (RSL) . 75
D.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 77
Annex E (normative): Frequency bands 13 GHz, 15 GHz and 18 GHz . 78
E.1 Introduction . 78
E.2 General characteristics . 78
E.2.1 Frequency characteristics and channel arrangements . 78
E.2.2 Transmission capacities . 79
E.3 Transmitter . 79
E.3.1 General requirements . 79
E.3.2 Transmitter Radio Frequency spectrum masks. 79
E.4 Receiver . 80
E.4.1 General requirements . 80
E.4.2 BER as a function of Receiver input Signal Level (RSL) . 80
ETSI
6 ETSI EN 302 217-2 V3.4.1 (2025-07)
E.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 83
Annex F (normative): Frequency bands from 23 GHz to 42 GHz . 84
F.1 Introduction . 84
F.2 General characteristics . 84
F.2.1 Frequency characteristics and channel arrangements . 84
F.2.2 Transmission capacities . 85
F.3 Transmitter . 85
F.3.1 General requirements . 85
F.3.2 Transmitter Radio Frequency spectrum masks. 86
F.4 Receiver . 86
F.4.1 General requirements . 86
F.4.2 BER as a function of Receiver input Signal Level (RSL) . 86
F.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 89
Annex G (normative): Frequency bands from 50 GHz to 55 GHz . 90
G.1 Introduction . 90
G.2 General characteristics . 90
G.2.1 Frequency characteristics and channel arrangements . 90
G.2.2 Transmission capacities . 91
G.3 Transmitter . 91
G.3.1 General requirements . 91
G.3.2 Transmitter Radio Frequency (RF) spectrum masks . 91
G.4 Receiver . 92
G.4.1 General requirements . 92
G.4.2 BER as a function of Receiver input Signal Level (RSL) . 92
G.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 93
Annex H (informative): Frequency band 57 GHz to 66 GHz . 94
H.1 Information on FS use of the band . 94
Annex I (informative): Frequency band 64 GHz to 66 GHz . 95
I.1 Information on FS use of the band . 95
Annex J (normative): Frequency bands from 71 GHz to 86 GHz . 96
J.1 Introduction . 96
J.2 General characteristics . 96
J.2.1 Frequency characteristics and channel arrangements . 96
J.2.2 Transmission capacities . 97
J.3 Transmitter . 98
J.3.1 General requirements . 98
J.3.2 Transmitter power and EIRP limits . 98
J.3.2.1 Transmitter maximum power and EIRP . 98
J.3.2.2 Transmitter Combined nominal output power and EIRP limits . 98
J.3.2.2.0 Generality . 98
J.3.2.2.1 Equipment without ATPC as permanent feature . 98
J.3.2.2.2 Equipment implementing ATPC as permanent feature . 99
J.3.3 Transmitter Radio Frequency spectrum masks. 101
J.3.4 Transmitter emissions limitations outside the 71 GHz to 76 GHz and 81 GHz to 86 GHz ranges . 101
J.3.4.1 General requirements . 101
J.3.4.2 Requirement for emissions falling in the 86 GHz to 92 GHz band . 102
J.3.4.3 Conformance indications . 102
J.4 Receiver . 103
J.4.1 General requirements . 103
ETSI
7 ETSI EN 302 217-2 V3.4.1 (2025-07)
J.4.2 BER as a function of Receiver input Signal Level (RSL) . 103
J.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 105
J.5 Minimum antenna gain . 107
Annex K (normative): Frequency bands from 92 GHz to 114,25 GHz . 108
K.1 Introduction . 108
K.2 General characteristics . 108
K.2.1 Frequency characteristics and channel arrangements . 108
K.2.2 Transmission capacities . 109
K.3 Transmitter . 110
K.3.1 General requirements . 110
K.3.2 Transmitter power and EIRP limits . 110
K.3.2.1 Transmitter maximum power and EIRP . 110
K.3.2.2 Transmitter Combined nominal output power and EIRP limits . 111
K.3.2.2.0 Generality . 111
K.3.2.2.1 Equipment without ATPC as permanent feature . 111
K.3.2.2.2 Equipment implementing ATPC as permanent feature . 111
K.3.3 Transmitter Radio Frequency (RF) spectrum masks . 113
K.3.4 Transmitter emissions limitations outside the 92 GHz to 94 GHz, 94,1 GHz to 100 GHz, 102 GHz to
109,5 GHz and 111,8 to 114,25 GHz ranges . 113
K.3.4.1 General requirement . 113
K.3.4.2 Requirement for emissions falling in the 86 GHz to 92 GHz, 100 GHz to 102 GHz, 109,5 GHz to
111,8 GHz and 114,25 to 116 GHz ranges . 114
K.3.4.3 Conformance indications . 115
K.4 Receiver . 116
K.4.1 General requirements . 116
K.4.2 BER as a function of Receiver input Signal Level (RSL) . 116
K.4.3 Receiver co channel and first adjacent channel interference sensitivity . 118
K.5 Minimum antenna gain . 120
Annex L (normative): Frequency bands from 130 GHz to 174,8 GHz . 121
L.1 Introduction . 121
L.2 General characteristics . 121
L.2.1 Frequency characteristics and channel arrangements . 121
L.2.2 Transmission capacities . 122
L.3 Transmitter . 123
L.3.1 General requirements . 123
L.3.2 Transmitter power and EIRP limits . 124
L.3.2.1 Transmitter maximum power and EIRP . 124
L.3.2.2 Transmitter Combined nominal output power and EIRP limits . 124
L.3.2.2.0 Generality . 124
L.3.2.2.1 Equipment without ATPC as permanent feature . 124
L.3.2.2.2 Equipment implementing ATPC as permanent feature . 125
L.3.3 Transmitter Radio Frequency spectrum masks. 127
L.3.4 Transmitter emissions limitations outside the 130 GHz to 134 GHz, 141 GHz to 148,5 GHz, 151,5 GHz
to 164 GHz and 167 GHz to 174,8 GHz ranges . 127
L.3.4.1 General requirement . 127
L.3.4.2 Requirement for emissions falling in the 148,5 GHz to 151,5 GHz and 164 GHz to 167 GHz. 128
L.3.4.3 Conformance indications . 128
L.4 Receiver . 129
L.4.1 General requirements . 129
L.4.2 BER as a function of Receiver input Signal Level (RSL) . 129
L.4.3 Receiver co channel and first adjacent channel interference sensitivity . 132
L.5 Minimum antenna gain . 136
ETSI
8 ETSI EN 302 217-2 V3.4.1 (2025-07)
Annex M: Void . 137
Annex N (normative): Definition of equivalent data rates for packet data, PDH/SDH and
other signals on the traffic interface. 138
N.1 Introduction . 138
N.2 General characteristics . 138
N.2.1 Frequency characteristics and channel arrangements . 138
N.2.2 Transmission capacities . 138
N.3 System parameters . 142
N.3.0 Introduction . 142
N.3.1 Transmitter . 142
N.3.2 Receiver . 142
N.3.3 FER as a function of BER . 142
Annex O (normative): Test report in relation to flexi
...

SLOVENSKI STANDARD
01-september-2025
Fiksni radijski sistemi - Karakteristike in zahteve za opremo tipa točka-točka in
antene - 2. del: Digitalni sistemi, ki delujejo v frekvenčnih pasovih od 1 GHz do
174,8 GHz - Harmonizirani standard za dostop do radijskega spektra
Fixed Radio Systems - Characteristics and requirements for point-to-point equipment
and antennas - Part 2: Digital systems operating in frequency bands from 1 GHz to 174,8
GHz - Harmonised Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 302 217-2 V3.4.1 (2025-07)
ICS:
33.060.30 Radiorelejni in fiksni satelitski Radio relay and fixed satellite
komunikacijski sistemi communications systems
33.120.40 Antene Aerials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

HARMONISED EUROPEAN STANDARD
Fixed Radio Systems;
Characteristics and requirements for
point-to-point equipment and antennas;
Part 2: Digital systems operating in frequency bands
from 1 GHz to 174,8 GHz;
Harmonised Standard for access to radio spectrum

2 ETSI EN 302 217-2 V3.4.1 (2025-07)

Reference
REN/ATTM-0458
Keywords
antenna, DFRS, digital, DRRS, FWS,
point-to-point, radio, regulation, transmission

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2025.
All rights reserved.
ETSI
3 ETSI EN 302 217-2 V3.4.1 (2025-07)
Contents
Intellectual Property Rights . 9
Foreword . 9
Modal verbs terminology . 10
Introduction . 10
1 Scope . 11
2 References . 11
2.1 Normative references . 11
2.2 Informative references . 12
3 Definition of terms, symbols and abbreviations . 15
3.1 Terms . 15
3.2 Symbols . 15
3.3 Abbreviations . 16
4 Technical requirements specifications . 16
4.0 Basic understanding of all requirements . 16
4.1 Framework for categorization of system . 17
4.1.0 Requirement selection . 17
4.1.1 Introduction and equipment flexibility . 17
4.1.2 Operating frequency bands and channel arrangements . 18
4.1.3 Spectral efficiency classes . 18
4.1.4 System alternatives . 19
4.1.5 Channel arrangements and utilization . 19
4.1.6 Specific requirements for frequency bands . 20
4.1.7 Minimum RIC density for spectral efficiency class selection . 21
4.1.8 System identification and traffic loading . 22
4.1.9 Environmental profile . 23
4.2 Transmitter requirements . 23
4.2.0 General: system loading . 23
4.2.1 Transmitter power and power environmental variation . 24
4.2.1.1 Transmitter maximum power and EIRP . 24
4.2.1.2 Transmitter combined nominal output power and EIRP limits . 24
4.2.1.3 Transmitter output power environmental variation . 24
4.2.2 Transmitter power and frequency control . 25
4.2.2.1 Transmitter Power and Frequency Control (ATPC, RTPC and RFC) . 25
4.2.2.1.0 General background . 25
4.2.2.1.1 Automatic Transmit Power Control (ATPC) . 25
4.2.2.1.2 Remote Transmit Power Control (RTPC) . 25
4.2.2.1.3 Transmitter Remote Frequency Control (RFC) . 25
4.2.3 Transmitter Radio Frequency (RF) spectrum mask . 25
4.2.3.1 Limits background . 25
4.2.3.2 Limits . 29
4.2.4 Transmitter discrete CW components exceeding the transmitter Radio Frequency spectrum mask
limit . 41
4.2.4.1 Transmitter discrete CW components at the symbol rate . 41
4.2.4.2 Transmitter other discrete CW components exceeding the transmitter Radio Frequency spectrum
mask limit . 41
4.2.5 Transmitter unwanted emissions in the spurious domain . 42
4.2.6 Transmitter dynamic Change of Modulation Order . 43
4.2.7 Transmitter Frequency stability . 44
4.2.8 Transmitter emission limitations outside the allocated band . 44
4.3 Receiver requirements . 44
4.3.0 General: System loading . 44
4.3.1 Receiver unwanted emissions in the spurious domain. 45
4.3.2 BER as a function of Receiver input Signal Level (RSL). 45
4.3.3 Receiver selectivity . 46
ETSI
4 ETSI EN 302 217-2 V3.4.1 (2025-07)
4.3.3.1 Introduction . 46
4.3.3.2 Receiver co-channel, first and second adjacent channel interference sensitivity . 46
4.3.3.2.1 Requirements basic . 46
4.3.3.2.2 Limits for co-channel and first adjacent channel interference sensitivity . 47
4.3.3.2.3 Limits for second adjacent channel interference sensitivity . 47
4.3.3.3 Receiver Blocking (CW spurious interference sensitivity) . 48
4.4 Antenna Characteristics . 48
4.4.1 Integral antennas or dedicated antennas. 48
4.4.1.1 Introduction . 48
4.4.1.2 Radiation Pattern Envelope (Off-axis EIRP density) . 48
4.4.1.3 Antenna gain . 49
4.4.1.4 Antenna Cross-Polar Discrimination (XPD) . 49
4.4.2 Guidelines for stand-alone antennas . 49
5 Testing for compliance with technical requirements . 49
5.1 Environmental and other conditions for testing . 49
5.1.1 Environmental conditions . 49
5.1.1.1 Generality . 49
5.1.1.2 Minimum profile for equipment indoor use . 50
5.1.1.3 Minimum profile for equipment outdoor use . 50
5.1.2 Testing of equipment and antenna combination . 50
5.1.3 Other basic conditions . 50
5.2 Test methods for the transmitter . 51
5.2.0 General test summary . 51
5.2.1 Transmitter power and power environmental variation . 52
5.2.1.1 Transmitter maximum power and EIRP . 52
5.2.1.2 Transmitter combined nominal output power and EIRP limits . 53
5.2.1.3 Transmitter output power environmental variation . 53
5.2.2 Transmitter power and frequency control . 53
5.2.2.1 Transmitter Power and Frequency Control (ATPC, RTPC and RFC) . 53
5.2.2.1.1 Automatic Transmit Power Control (ATPC) . 53
5.2.2.1.2 Remote Transmit Power Control (RTPC) . 53
5.2.2.1.3 Transmitter Remote Frequency Control (RFC) . 54
5.2.3 Transmitter Radio Frequency spectrum mask. 54
5.2.4 Transmitter discrete CW components exceeding the transmitter Radio Frequency spectrum mask
limit . 54
5.2.5 Transmitter unwanted emissions in the spurious domain . 54
5.2.6 Transmitter dynamic Change of Modulation Order . 55
5.2.7 Transmitter Radio Frequency stability . 55
5.2.8 Transmitter emission limitations outside the allocated band . 55
5.3 Test methods for the receiver . 55
5.3.0 General test summary . 55
5.3.1 Receiver unwanted emissions in the spurious domain . 56
5.3.2 BER as a function of Receiver input Signal Level (RSL). 56
5.3.3 Receiver selectivity . 57
5.3.3.1 Void. 57
5.3.3.2 Receiver co-channel, first and second adjacent channel interference sensitivity . 57
5.3.3.2.1 Void . 57
5.3.3.2.2 Receiver co-channel and first adjacent channel . 57
5.3.3.2.3 Receiver second adjacent channel . 57
5.3.3.3 Receiver Blocking (CW spurious interference sensitivity) . 57
5.4 Antenna test methods . 58
5.4.1 Integral antennas or dedicated antenna . 58
5.4.1.1 Summary . 58
5.4.1.2 Radiation Pattern Envelope (Off-axis EIRP density) . 58
5.4.1.3 Antenna gain . 58
5.4.1.4 Antenna Cross-Polar Discrimination (XPD) . 58
5.4.2 Information on stand-alone antennas tests . 58
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 59
ETSI
5 ETSI EN 302 217-2 V3.4.1 (2025-07)
Annex B (normative): Frequency bands from 1,4 GHz to 2,6 GHz . 61
B.1 Introduction . 61
B.2 General characteristics . 61
B.2.1 Frequency characteristics and channel arrangements . 61
B.2.2 Transmission capacities . 62
B.3 Transmitter . 63
B.3.1 General requirements . 63
B.3.2 Transmitter Radio Frequency spectrum masks options . 63
B.4 Receiver . 64
B.4.1 General requirements . 64
B.4.2 BER as a function of Receiver input Signal Level (RSL) . 64
B.4.3 Receiver co-channel, first and second adjacent channels interference sensitivity . 65
Annex C (normative): Frequency bands from 3,5 GHz to 11 GHz (channel separation up to
30 MHz, 56/60 MHz and 112 MHz) . 66
C.1 Introduction . 66
C.2 General characteristics . 66
C.2.1 Frequency characteristics and channel arrangements . 66
C.2.2 Transmission capacities . 68
C.3 Transmitter . 68
C.3.1 General requirements . 68
C.3.2 Transmitter Radio Frequency (RF) spectrum masks . 68
C.4 Receiver . 69
C.4.1 General requirements . 69
C.4.2 BER as a function of Receiver input Signal Level (RSL) . 69
C.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 71
Annex D (normative): Frequency bands from 4 GHz to 11 GHz (channel separation 40 MHz
and 80 MHz) . 73
D.1 Introduction . 73
D.2 General characteristics . 73
D.2.1 Frequency characteristics and channel arrangements . 73
D.2.2 Transmission capacities . 74
D.3 Transmitter . 75
D.3.1 General requirements . 75
D.3.2 Transmitter Radio Frequency spectrum masks. 75
D.4 Receiver . 75
D.4.1 General requirements . 75
D.4.2 BER as a function of Receiver input Signal Level (RSL) . 75
D.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 77
Annex E (normative): Frequency bands 13 GHz, 15 GHz and 18 GHz . 78
E.1 Introduction . 78
E.2 General characteristics . 78
E.2.1 Frequency characteristics and channel arrangements . 78
E.2.2 Transmission capacities . 79
E.3 Transmitter . 79
E.3.1 General requirements . 79
E.3.2 Transmitter Radio Frequency spectrum masks. 79
E.4 Receiver . 80
E.4.1 General requirements . 80
E.4.2 BER as a function of Receiver input Signal Level (RSL) . 80
ETSI
6 ETSI EN 302 217-2 V3.4.1 (2025-07)
E.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 83
Annex F (normative): Frequency bands from 23 GHz to 42 GHz . 84
F.1 Introduction . 84
F.2 General characteristics . 84
F.2.1 Frequency characteristics and channel arrangements . 84
F.2.2 Transmission capacities . 85
F.3 Transmitter . 85
F.3.1 General requirements . 85
F.3.2 Transmitter Radio Frequency spectrum masks. 86
F.4 Receiver . 86
F.4.1 General requirements . 86
F.4.2 BER as a function of Receiver input Signal Level (RSL) . 86
F.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 89
Annex G (normative): Frequency bands from 50 GHz to 55 GHz . 90
G.1 Introduction . 90
G.2 General characteristics . 90
G.2.1 Frequency characteristics and channel arrangements . 90
G.2.2 Transmission capacities . 91
G.3 Transmitter . 91
G.3.1 General requirements . 91
G.3.2 Transmitter Radio Frequency (RF) spectrum masks . 91
G.4 Receiver . 92
G.4.1 General requirements . 92
G.4.2 BER as a function of Receiver input Signal Level (RSL) . 92
G.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 93
Annex H (informative): Frequency band 57 GHz to 66 GHz . 94
H.1 Information on FS use of the band . 94
Annex I (informative): Frequency band 64 GHz to 66 GHz . 95
I.1 Information on FS use of the band . 95
Annex J (normative): Frequency bands from 71 GHz to 86 GHz . 96
J.1 Introduction . 96
J.2 General characteristics . 96
J.2.1 Frequency characteristics and channel arrangements . 96
J.2.2 Transmission capacities . 97
J.3 Transmitter . 98
J.3.1 General requirements . 98
J.3.2 Transmitter power and EIRP limits . 98
J.3.2.1 Transmitter maximum power and EIRP . 98
J.3.2.2 Transmitter Combined nominal output power and EIRP limits . 98
J.3.2.2.0 Generality . 98
J.3.2.2.1 Equipment without ATPC as permanent feature . 98
J.3.2.2.2 Equipment implementing ATPC as permanent feature . 99
J.3.3 Transmitter Radio Frequency spectrum masks. 101
J.3.4 Transmitter emissions limitations outside the 71 GHz to 76 GHz and 81 GHz to 86 GHz ranges . 101
J.3.4.1 General requirements . 101
J.3.4.2 Requirement for emissions falling in the 86 GHz to 92 GHz band . 102
J.3.4.3 Conformance indications . 102
J.4 Receiver . 103
J.4.1 General requirements . 103
ETSI
7 ETSI EN 302 217-2 V3.4.1 (2025-07)
J.4.2 BER as a function of Receiver input Signal Level (RSL) . 103
J.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 105
J.5 Minimum antenna gain . 107
Annex K (normative): Frequency bands from 92 GHz to 114,25 GHz . 108
K.1 Introduction . 108
K.2 General characteristics . 108
K.2.1 Frequency characteristics and channel arrangements . 108
K.2.2 Transmission capacities . 109
K.3 Transmitter . 110
K.3.1 General requirements . 110
K.3.2 Transmitter power and EIRP limits . 110
K.3.2.1 Transmitter maximum power and EIRP . 110
K.3.2.2 Transmitter Combined nominal output power and EIRP limits . 111
K.3.2.2.0 Generality . 111
K.3.2.2.1 Equipment without ATPC as permanent feature . 111
K.3.2.2.2 Equipment implementing ATPC as permanent feature . 111
K.3.3 Transmitter Radio Frequency (RF) spectrum masks . 113
K.3.4 Transmitter emissions limitations outside the 92 GHz to 94 GHz, 94,1 GHz to 100 GHz, 102 GHz to
109,5 GHz and 111,8 to 114,25 GHz ranges . 113
K.3.4.1 General requirement . 113
K.3.4.2 Requirement for emissions falling in the 86 GHz to 92 GHz, 100 GHz to 102 GHz, 109,5 GHz to
111,8 GHz and 114,25 to 116 GHz ranges . 114
K.3.4.3 Conformance indications . 115
K.4 Receiver . 116
K.4.1 General requirements . 116
K.4.2 BER as a function of Receiver input Signal Level (RSL) . 116
K.4.3 Receiver co channel and first adjacent channel interference sensitivity . 118
K.5 Minimum antenna gain . 120
Annex L (normative): Frequency bands from 130 GHz to 174,8 GHz . 121
L.1 Introduction . 121
L.2 General characteristics . 121
L.2.1 Frequency characteristics and channel arrangements . 121
L.2.2 Transmission capacities . 122
L.3 Transmitter . 123
L.3.1 General requirements . 123
L.3.2 Transmitter power and EIRP limits . 124
L.3.2.1 Transmitter maximum power and EIRP . 124
L.3.2.2 Transmitter Combined nominal output power and EIRP limits . 124
L.3.2.2.0 Generality . 124
L.3.2.2.1 Equipment without ATPC as permanent feature . 124
L.3.2.2.2 Equipment implementing ATPC as permanent feature . 125
L.3.3 Transmitter Radio Frequency spectrum masks. 127
L.3.4 Transmitter emissions limitations outside the 130 GHz to 134 GHz, 141 GHz to 148,5 GHz, 151,5 GHz
to 164 GHz and 167 GHz to 174,8 GHz ranges . 127
L.3.4.1 General requirement . 127
L.3.4.2 Requirement for emissions falling in the 148,5 GHz to 151,5 GHz and 164 GHz to 167 GHz. 128
L.3.4.3 Conformance indications . 128
L.4 Receiver . 129
L.4.1 General requirements . 129
L.4.2 BER as a function of Receiver input Signal Level (RSL) . 129
L.4.3 Receiver co channel and first adjacent channel interference sensitivity . 132
L.5 Minimum antenna gain . 136
ETSI
8 ETSI EN 302 217-2 V3.4.1 (2025-07)
Annex M: Void . 137
Annex N (normative): Definition of equivalent data rates for packet data, PDH/SDH and
other signals on the traffic interface. 138
N.1 Introduction . 138
N.2 General characteristics .
...

SLOVENSKI STANDARD
01-september-2025
Fiksni radijski sistemi - Karakteristike in zahteve za opremo in antene tipa točka-
točka - 2. del: Digitalni sistemi, ki delujejo v frekvenčnih pasovih od 1 GHz do
174,8 GHz - Harmonizirani standard za dostop do radijskega spektra
Fixed Radio Systems - Characteristics and requirements for point-to-point equipment
and antennas - Part 2: Digital systems operating in frequency bands from 1 GHz to 174,8
GHz - Harmonised Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 302 217-2 V3.4.1 (2025-07)
ICS:
33.060.30 Radiorelejni in fiksni satelitski Radio relay and fixed satellite
komunikacijski sistemi communications systems
33.120.40 Antene Aerials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

HARMONISED EUROPEAN STANDARD
Fixed Radio Systems;
Characteristics and requirements for
point-to-point equipment and antennas;
Part 2: Digital systems operating in frequency bands
from 1 GHz to 174,8 GHz;
Harmonised Standard for access to radio spectrum

2 ETSI EN 302 217-2 V3.4.1 (2025-07)

Reference
REN/ATTM-0458
Keywords
antenna, DFRS, digital, DRRS, FWS,
point-to-point, radio, regulation, transmission

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2025.
All rights reserved.
ETSI
3 ETSI EN 302 217-2 V3.4.1 (2025-07)
Contents
Intellectual Property Rights . 9
Foreword . 9
Modal verbs terminology . 10
Introduction . 10
1 Scope . 11
2 References . 11
2.1 Normative references . 11
2.2 Informative references . 12
3 Definition of terms, symbols and abbreviations . 15
3.1 Terms . 15
3.2 Symbols . 15
3.3 Abbreviations . 16
4 Technical requirements specifications . 16
4.0 Basic understanding of all requirements . 16
4.1 Framework for categorization of system . 17
4.1.0 Requirement selection . 17
4.1.1 Introduction and equipment flexibility . 17
4.1.2 Operating frequency bands and channel arrangements . 18
4.1.3 Spectral efficiency classes . 18
4.1.4 System alternatives . 19
4.1.5 Channel arrangements and utilization . 19
4.1.6 Specific requirements for frequency bands . 20
4.1.7 Minimum RIC density for spectral efficiency class selection . 21
4.1.8 System identification and traffic loading . 22
4.1.9 Environmental profile . 23
4.2 Transmitter requirements . 23
4.2.0 General: system loading . 23
4.2.1 Transmitter power and power environmental variation . 24
4.2.1.1 Transmitter maximum power and EIRP . 24
4.2.1.2 Transmitter combined nominal output power and EIRP limits . 24
4.2.1.3 Transmitter output power environmental variation . 24
4.2.2 Transmitter power and frequency control . 25
4.2.2.1 Transmitter Power and Frequency Control (ATPC, RTPC and RFC) . 25
4.2.2.1.0 General background . 25
4.2.2.1.1 Automatic Transmit Power Control (ATPC) . 25
4.2.2.1.2 Remote Transmit Power Control (RTPC) . 25
4.2.2.1.3 Transmitter Remote Frequency Control (RFC) . 25
4.2.3 Transmitter Radio Frequency (RF) spectrum mask . 25
4.2.3.1 Limits background . 25
4.2.3.2 Limits . 29
4.2.4 Transmitter discrete CW components exceeding the transmitter Radio Frequency spectrum mask
limit . 41
4.2.4.1 Transmitter discrete CW components at the symbol rate . 41
4.2.4.2 Transmitter other discrete CW components exceeding the transmitter Radio Frequency spectrum
mask limit . 41
4.2.5 Transmitter unwanted emissions in the spurious domain . 42
4.2.6 Transmitter dynamic Change of Modulation Order . 43
4.2.7 Transmitter Frequency stability . 44
4.2.8 Transmitter emission limitations outside the allocated band . 44
4.3 Receiver requirements . 44
4.3.0 General: System loading . 44
4.3.1 Receiver unwanted emissions in the spurious domain. 45
4.3.2 BER as a function of Receiver input Signal Level (RSL). 45
4.3.3 Receiver selectivity . 46
ETSI
4 ETSI EN 302 217-2 V3.4.1 (2025-07)
4.3.3.1 Introduction . 46
4.3.3.2 Receiver co-channel, first and second adjacent channel interference sensitivity . 46
4.3.3.2.1 Requirements basic . 46
4.3.3.2.2 Limits for co-channel and first adjacent channel interference sensitivity . 47
4.3.3.2.3 Limits for second adjacent channel interference sensitivity . 47
4.3.3.3 Receiver Blocking (CW spurious interference sensitivity) . 48
4.4 Antenna Characteristics . 48
4.4.1 Integral antennas or dedicated antennas. 48
4.4.1.1 Introduction . 48
4.4.1.2 Radiation Pattern Envelope (Off-axis EIRP density) . 48
4.4.1.3 Antenna gain . 49
4.4.1.4 Antenna Cross-Polar Discrimination (XPD) . 49
4.4.2 Guidelines for stand-alone antennas . 49
5 Testing for compliance with technical requirements . 49
5.1 Environmental and other conditions for testing . 49
5.1.1 Environmental conditions . 49
5.1.1.1 Generality . 49
5.1.1.2 Minimum profile for equipment indoor use . 50
5.1.1.3 Minimum profile for equipment outdoor use . 50
5.1.2 Testing of equipment and antenna combination . 50
5.1.3 Other basic conditions . 50
5.2 Test methods for the transmitter . 51
5.2.0 General test summary . 51
5.2.1 Transmitter power and power environmental variation . 52
5.2.1.1 Transmitter maximum power and EIRP . 52
5.2.1.2 Transmitter combined nominal output power and EIRP limits . 53
5.2.1.3 Transmitter output power environmental variation . 53
5.2.2 Transmitter power and frequency control . 53
5.2.2.1 Transmitter Power and Frequency Control (ATPC, RTPC and RFC) . 53
5.2.2.1.1 Automatic Transmit Power Control (ATPC) . 53
5.2.2.1.2 Remote Transmit Power Control (RTPC) . 53
5.2.2.1.3 Transmitter Remote Frequency Control (RFC) . 54
5.2.3 Transmitter Radio Frequency spectrum mask. 54
5.2.4 Transmitter discrete CW components exceeding the transmitter Radio Frequency spectrum mask
limit . 54
5.2.5 Transmitter unwanted emissions in the spurious domain . 54
5.2.6 Transmitter dynamic Change of Modulation Order . 55
5.2.7 Transmitter Radio Frequency stability . 55
5.2.8 Transmitter emission limitations outside the allocated band . 55
5.3 Test methods for the receiver . 55
5.3.0 General test summary . 55
5.3.1 Receiver unwanted emissions in the spurious domain . 56
5.3.2 BER as a function of Receiver input Signal Level (RSL). 56
5.3.3 Receiver selectivity . 57
5.3.3.1 Void. 57
5.3.3.2 Receiver co-channel, first and second adjacent channel interference sensitivity . 57
5.3.3.2.1 Void . 57
5.3.3.2.2 Receiver co-channel and first adjacent channel . 57
5.3.3.2.3 Receiver second adjacent channel . 57
5.3.3.3 Receiver Blocking (CW spurious interference sensitivity) . 57
5.4 Antenna test methods . 58
5.4.1 Integral antennas or dedicated antenna . 58
5.4.1.1 Summary . 58
5.4.1.2 Radiation Pattern Envelope (Off-axis EIRP density) . 58
5.4.1.3 Antenna gain . 58
5.4.1.4 Antenna Cross-Polar Discrimination (XPD) . 58
5.4.2 Information on stand-alone antennas tests . 58
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 59
ETSI
5 ETSI EN 302 217-2 V3.4.1 (2025-07)
Annex B (normative): Frequency bands from 1,4 GHz to 2,6 GHz . 61
B.1 Introduction . 61
B.2 General characteristics . 61
B.2.1 Frequency characteristics and channel arrangements . 61
B.2.2 Transmission capacities . 62
B.3 Transmitter . 63
B.3.1 General requirements . 63
B.3.2 Transmitter Radio Frequency spectrum masks options . 63
B.4 Receiver . 64
B.4.1 General requirements . 64
B.4.2 BER as a function of Receiver input Signal Level (RSL) . 64
B.4.3 Receiver co-channel, first and second adjacent channels interference sensitivity . 65
Annex C (normative): Frequency bands from 3,5 GHz to 11 GHz (channel separation up to
30 MHz, 56/60 MHz and 112 MHz) . 66
C.1 Introduction . 66
C.2 General characteristics . 66
C.2.1 Frequency characteristics and channel arrangements . 66
C.2.2 Transmission capacities . 68
C.3 Transmitter . 68
C.3.1 General requirements . 68
C.3.2 Transmitter Radio Frequency (RF) spectrum masks . 68
C.4 Receiver . 69
C.4.1 General requirements . 69
C.4.2 BER as a function of Receiver input Signal Level (RSL) . 69
C.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 71
Annex D (normative): Frequency bands from 4 GHz to 11 GHz (channel separation 40 MHz
and 80 MHz) . 73
D.1 Introduction . 73
D.2 General characteristics . 73
D.2.1 Frequency characteristics and channel arrangements . 73
D.2.2 Transmission capacities . 74
D.3 Transmitter . 75
D.3.1 General requirements . 75
D.3.2 Transmitter Radio Frequency spectrum masks. 75
D.4 Receiver . 75
D.4.1 General requirements . 75
D.4.2 BER as a function of Receiver input Signal Level (RSL) . 75
D.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 77
Annex E (normative): Frequency bands 13 GHz, 15 GHz and 18 GHz . 78
E.1 Introduction . 78
E.2 General characteristics . 78
E.2.1 Frequency characteristics and channel arrangements . 78
E.2.2 Transmission capacities . 79
E.3 Transmitter . 79
E.3.1 General requirements . 79
E.3.2 Transmitter Radio Frequency spectrum masks. 79
E.4 Receiver . 80
E.4.1 General requirements . 80
E.4.2 BER as a function of Receiver input Signal Level (RSL) . 80
ETSI
6 ETSI EN 302 217-2 V3.4.1 (2025-07)
E.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 83
Annex F (normative): Frequency bands from 23 GHz to 42 GHz . 84
F.1 Introduction . 84
F.2 General characteristics . 84
F.2.1 Frequency characteristics and channel arrangements . 84
F.2.2 Transmission capacities . 85
F.3 Transmitter . 85
F.3.1 General requirements . 85
F.3.2 Transmitter Radio Frequency spectrum masks. 86
F.4 Receiver . 86
F.4.1 General requirements . 86
F.4.2 BER as a function of Receiver input Signal Level (RSL) . 86
F.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 89
Annex G (normative): Frequency bands from 50 GHz to 55 GHz . 90
G.1 Introduction . 90
G.2 General characteristics . 90
G.2.1 Frequency characteristics and channel arrangements . 90
G.2.2 Transmission capacities . 91
G.3 Transmitter . 91
G.3.1 General requirements . 91
G.3.2 Transmitter Radio Frequency (RF) spectrum masks . 91
G.4 Receiver . 92
G.4.1 General requirements . 92
G.4.2 BER as a function of Receiver input Signal Level (RSL) . 92
G.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 93
Annex H (informative): Frequency band 57 GHz to 66 GHz . 94
H.1 Information on FS use of the band . 94
Annex I (informative): Frequency band 64 GHz to 66 GHz . 95
I.1 Information on FS use of the band . 95
Annex J (normative): Frequency bands from 71 GHz to 86 GHz . 96
J.1 Introduction . 96
J.2 General characteristics . 96
J.2.1 Frequency characteristics and channel arrangements . 96
J.2.2 Transmission capacities . 97
J.3 Transmitter . 98
J.3.1 General requirements . 98
J.3.2 Transmitter power and EIRP limits . 98
J.3.2.1 Transmitter maximum power and EIRP . 98
J.3.2.2 Transmitter Combined nominal output power and EIRP limits . 98
J.3.2.2.0 Generality . 98
J.3.2.2.1 Equipment without ATPC as permanent feature . 98
J.3.2.2.2 Equipment implementing ATPC as permanent feature . 99
J.3.3 Transmitter Radio Frequency spectrum masks. 101
J.3.4 Transmitter emissions limitations outside the 71 GHz to 76 GHz and 81 GHz to 86 GHz ranges . 101
J.3.4.1 General requirements . 101
J.3.4.2 Requirement for emissions falling in the 86 GHz to 92 GHz band . 102
J.3.4.3 Conformance indications . 102
J.4 Receiver . 103
J.4.1 General requirements . 103
ETSI
7 ETSI EN 302 217-2 V3.4.1 (2025-07)
J.4.2 BER as a function of Receiver input Signal Level (RSL) . 103
J.4.3 Receiver co-channel and first adjacent channel interference sensitivity . 105
J.5 Minimum antenna gain . 107
Annex K (normative): Frequency bands from 92 GHz to 114,25 GHz . 108
K.1 Introduction . 108
K.2 General characteristics . 108
K.2.1 Frequency characteristics and channel arrangements . 108
K.2.2 Transmission capacities . 109
K.3 Transmitter . 110
K.3.1 General requirements . 110
K.3.2 Transmitter power and EIRP limits . 110
K.3.2.1 Transmitter maximum power and EIRP . 110
K.3.2.2 Transmitter Combined nominal output power and EIRP limits . 111
K.3.2.2.0 Generality . 111
K.3.2.2.1 Equipment without ATPC as permanent feature . 111
K.3.2.2.2 Equipment implementing ATPC as permanent feature . 111
K.3.3 Transmitter Radio Frequency (RF) spectrum masks . 113
K.3.4 Transmitter emissions limitations outside the 92 GHz to 94 GHz, 94,1 GHz to 100 GHz, 102 GHz to
109,5 GHz and 111,8 to 114,25 GHz ranges . 113
K.3.4.1 General requirement . 113
K.3.4.2 Requirement for emissions falling in the 86 GHz to 92 GHz, 100 GHz to 102 GHz, 109,5 GHz to
111,8 GHz and 114,25 to 116 GHz ranges . 114
K.3.4.3 Conformance indications . 115
K.4 Receiver . 116
K.4.1 General requirements . 116
K.4.2 BER as a function of Receiver input Signal Level (RSL) . 116
K.4.3 Receiver co channel and first adjacent channel interference sensitivity . 118
K.5 Minimum antenna gain . 120
Annex L (normative): Frequency bands from 130 GHz to 174,8 GHz . 121
L.1 Introduction . 121
L.2 General characteristics . 121
L.2.1 Frequency characteristics and channel arrangements . 121
L.2.2 Transmission capacities . 122
L.3 Transmitter . 123
L.3.1 General requirements . 123
L.3.2 Transmitter power and EIRP limits . 124
L.3.2.1 Transmitter maximum power and EIRP . 124
L.3.2.2 Transmitter Combined nominal output power and EIRP limits . 124
L.3.2.2.0 Generality . 124
L.3.2.2.1 Equipment without ATPC as permanent feature . 124
L.3.2.2.2 Equipment implementing ATPC as permanent feature . 125
L.3.3 Transmitter Radio Frequency spectrum masks. 127
L.3.4 Transmitter emissions limitations outside the 130 GHz to 134 GHz, 141 GHz to 148,5 GHz, 151,5 GHz
to 164 GHz and 167 GHz to 174,8 GHz ranges . 127
L.3.4.1 General requirement . 127
L.3.4.2 Requirement for emissions falling in the 148,5 GHz to 151,5 GHz and 164 GHz to 167 GHz. 128
L.3.4.3 Conformance indications . 128
L.4 Receiver . 129
L.4.1 General requirements . 129
L.4.2 BER as a function of Receiver input Signal Level (RSL) . 129
L.4.3 Receiver co channel and first adjacent channel interference sensitivity . 132
L.5 Minimum antenna gain . 136
ETSI
8 ETSI EN 302 217-2 V3.4.1 (2025-07)
Annex M: Void . 137
Annex N (normative): Definition of equivalent data rates for packet data, PDH/SDH and
other signals on the traffic interface. 138
N.1 Introduction . 138
N.2 General characteristics .
...