ETSI EN 301 823-1-2 V1.1.1 (2001-01)

SLOVENSKI STANDARD
SIST EN 301 823-1-2 V1.1.1:2006
01-februar-2006
Širokopasovna radijska dostopovna omrežja (BRAN) – Zelo zmogljivo radijsko
lokalno omrežje (HIPERLAN), tip 2 – Specifikacija za preskušanje skladnosti
protokola krmiljenja podatkovnih povezav (DLC) – 1. del: Funkcija za prenos
osnovnih podatkov – 2. poddel: Zgradba preskušalnega niza in namen
preskušanja (TSS&TP) – Specifikacija
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing
for the Data Link Control (DLC) protocol; Part 1: Basic data transport function; Sub-part
2: Test Suite Structure and Test Purposes (TSS&TP) specification
Ta slovenski standard je istoveten z: EN 301 823-1-2 Version 1.1.1
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
35.110 Omreževanje Networking
SIST EN 301 823-1-2 V1.1.1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 301 823-1-2 V1.1.1:2006

---------------------- Page: 2 ----------------------

SIST EN 301 823-1-2 V1.1.1:2006
ETSI EN 301 823-1-2 V1.1.1 (2001-01)
European Standard (Telecommunications series)
Broadband Radio Access Networks (BRAN);
HIPERLAN Type 2;
Conformance testing for the
Data Link Control (DLC) protocol;
Part 1: Basic data transport function;
Sub-part 2: Test Suite Structure and
Test Purposes (TSS&TP) specification

---------------------- Page: 3 ----------------------

SIST EN 301 823-1-2 V1.1.1:2006
2 ETSI EN 301 823-1-2 V1.1.1 (2001-01)
Reference
DEN/BRAN-002T004-1-2
Keywords
access, control, data, HIPERLAN, radio, TSS&TP
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33492 94 4200 Fax: +33493 65 4716
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2001.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 301 823-1-2 V1.1.1:2006
3 ETSI EN 301 823-1-2 V1.1.1 (2001-01)
Contents
Intellectual Property Rights .4
Foreword.4
1 Scope.5
2 References.5
3 Definitions and abbreviations.5
3.1 Definitions . 5
3.2 Abbreviations. 6
4 Test suite structure.6
4.1 Structure . 6
4.2 Test groups . 6
4.2.1 Protocol groups. 6
4.2.1.1 Transmission mode. 7
4.2.2 Main test groups . 7
4.2.2.1 Capability (CA) tests . 7
4.2.2.2 Valid Behaviour (BV) tests. 7
4.2.2.3 Invalid Behaviour (BI) tests . 7
4.2.2.4 Inopportune Behaviour (BO) tests. 7
5 Test Purposes (TP).7
5.1 Introduction. 7
5.1.1 TP definition conventions. 7
5.1.2 TP naming conventions. 8
5.1.3 Sources of TP definitions . 8
5.2 Test purposes for AP . 8
5.2.1 Acknowledge mode. 8
5.3 Test purposes for MT . 10
5.3.1 Acknowledge mode. 10
History .12
ETSI

---------------------- Page: 5 ----------------------

SIST EN 301 823-1-2 V1.1.1:2006
4 ETSI EN 301 823-1-2 V1.1.1 (2001-01)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Project Broadband Radio Access
Networks (BRAN).
The present document is sub-part 2 of a multi-part deliverable covering Broadband Radio Access Networks (BRAN);
HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) protocol; Part 1: Basic data transport
function, as identified below:
Sub-part 1: "Protocol Implementation Conformance Statement (PICS) proforma";
Sub-part 2: "Test Suite Structure and Test Purposes (TSS&TP) specification";
Sub-part 3: "Abstract Test Suite (ATS) specification".
National transposition dates
Date of adoption of this EN: 19 January 2001
Date of latest announcement of this EN (doa): 30 April 2001
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 October 2001
Date of withdrawal of any conflicting National Standard (dow): 31 October 2001
ETSI

---------------------- Page: 6 ----------------------

SIST EN 301 823-1-2 V1.1.1:2006
5 ETSI EN 301 823-1-2 V1.1.1 (2001-01)
1 Scope
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the BRAN HIPERLAN
Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 1: Basic data transport function.
The objective of the present document is to provide a basis for conformance tests for HIPERLAN Type 2 equipment
giving a high probability of air interface inter-operability between different manufacturers' HIPERLAN Type 2
equipment.
The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [3] and ISO/IEC 9646-2 [4]) as well as
the ETSI rules for conformance testing (ETS 300 406 [2]) are used as a basis for the test methodology.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
• A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
[1] ETSI TS 101 761-1 (V1.1.1): "Broadband Radio Access Networks (BRAN); HIPERLAN Type 2;
Data Link Control (DLC) Layer; Part 1: Basic data transport functions".
[2] ETSI ETS 300 406 (1995): "Methods for Testing and Specification (MTS); Protocol and profile
conformance testing specifications; Standardization methodology".
[3] ISO/IEC 9646-1 (1991): "Information technology - Open Systems Interconnection - Conformance
testing methodology and framework - Part 1: General concepts". (See also
CCITT Recommendation X.290 (1991)).
[4] ISO/IEC 9646-2 (1991): "Information technology - Open Systems Interconnection - Conformance
testing methodology and framework - Part 2: Abstract Test Suite specification". (See also
CCITT Recommendation X.291 (1991)).
[5] ISO/IEC 9646-6 (1991): "Information technology - Open Systems Interconnection - Conformance
testing methodology and framework - Part 6: Protocol profile test specification".
[6] ISO/IEC 9646-7 (1991): "Information technology - Open Systems Interconnection - Conformance
testing methodology and framework - Part 7: Implementation Conformance Statements".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
a) The terms defined in ISO/IEC 9646-7 [6]; and
b) The definitions in TS 101 761-1 [1].
ETSI

---------------------- Page: 7 ----------------------

SIST EN 301 823-1-2 V1.1.1:2006
6 ETSI EN 301 823-1-2 V1.1.1 (2001-01)
3.2 Abbreviations
For the purposes of the present document, the abbreviations defined in ISO/IEC 9646-1 [3], ISO/IEC 9646-6 [5],
ISO/IEC 9646-7 [6] and the abbreviations defined in TS 101 761-1 [1] apply. In particular, the following definitions
apply:
AP Access Point
ARQ Automatic Repeat Request
BCH Broadcast CHannel
BI Invalid Behaviour
BO Inopportune Behaviour
BV Valid Behaviour
CA Capability tests
CC Central Controller
DCC DLC user Connection Control
DLC Data Link Control
DUC DLC User Connection
EC Error Control
IUT Implementation Under Test
LCH Long CHannel
MAC Medium Access Control
MT Mobile Terminal
PDU Protocol Data Unit
PICS Protocol Implementation Conformance Statement
TSS Test Suite Structure
TP Test Purposes
4 Test suite structure
4.1 Structure
Figure 1 shows the DLC Error Control Test Suite Structure (TSS) including its subgroups defined for the conformance
testing.
Test Suite Protocol group Protocol subgroup Test group
CA BV BI BO
ERC-AP/ ERC-MT DLC Error Control service Acknowledge mode x
Repetition mode x
Unacknowledge mode x
Figure 1: TSS for HIPERLAN 2 DLC Error Control service
The test suite is structured as a tree with a first level defined as ERC-AP or ERC-MT representing the protocol group
"DLC Error Control service for AP and DLC Error Control service for MT".
4.2 Test groups
The test groups are organized in three levels. The first level creates one protocol group representing the protocol
services. The second level separates the protocol services in functional modules. The last level in each branch contains
one or more of the standard ISO subgroups CA, BV, BI and BO.
4.2.1 Protocol groups
The protocol groups identify the DLC Error Control service, as defined in TS 101 761-1 [1].
ETSI

---------------------- Page: 8 ----------------------

SIST EN 301 823-1-2 V1.1.1:2006
7 ETSI EN 301 823-1-2 V1.1.1 (2001-01)
4.2.1.1 Transmission mode
The Error Control service
...