ETSI EN 301 489-19 V2.1.1 (2019-04)

SLOVENSKI STANDARD
SIST EN 301 489-19 V2.1.1:2019
01-junij-2019
Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 19.
del: Posebni pogoji za sprejemne mobilne zemeljske postaje (ROMES), ki delujejo
v pasu 1,5 GHz in zagotavljajo podatkovne komunikacije, ter za sprejemnike
GNSS, ki delujejo v pasu RNSS (ROGNSS) in zagotavljajo določanje položaja,
navigacijo in časovne podatke - Harmonizirani standard, ki zajema bistvene
zahteve člena 3.1(b) direktive 2014/53/EU
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part
19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the
1,5 GHz band providing data communications and GNSS receivers operating in the
RNSS band (ROGNSS) providing positioning, navigation, and timing data - Harmonised
Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
Ta slovenski standard je istoveten z: ETSI EN 301 489-19 V2.1.1 (2019-04)
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
33.070.40 Satelit Satellite
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 489-19 V2.1.1:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 301 489-19 V2.1.1:2019

---------------------- Page: 2 ----------------------
SIST EN 301 489-19 V2.1.1:2019
ETSI EN 301 489-19 V2.1.1 (2019-04)






HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 19: Specific conditions for Receive Only Mobile
Earth Stations (ROMES) operating in the 1,5 GHz band
providing data communications and GNSS receivers
operating in the RNSS band (ROGNSS)
providing positioning, navigation, and timing data;
Harmonised Standard covering the essential requirements
of article 3.1(b) of Directive 2014/53/EU

---------------------- Page: 3 ----------------------
SIST EN 301 489-19 V2.1.1:2019

2 ETSI EN 301 489-19 V2.1.1 (2019-04)



Reference
REN/ERM-EMC-366-19
Keywords
data, earth station, EMC, harmonised standard,
mobile, MSS, radio, receiver, regulation, satellite,
testing

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2019.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 4 ----------------------
SIST EN 301 489-19 V2.1.1:2019

3 ETSI EN 301 489-19 V2.1.1 (2019-04)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions and abbreviations . 7
3.1 Definitions . 7
3.2 Abbreviations . 7
4 Test conditions . 7
4.1 General . 7
4.2 Arrangements for test signals . 7
4.2.0 General . 7
4.2.1 Arrangements for test signals at the input of ROMES and ROGNSS receivers . 8
4.2.2 Arrangements for test signals at the output of ROMES and ROGNSS receivers . 8
4.3 Exclusion bands . 8
4.3.0 General . 8
4.3.1 Receiver exclusion band . 8
4.4 Narrow band responses of receivers . 8
4.5 Normal test modulation . 9
5 Performance assessment . 9
5.1 General . 9
5.2 Equipment which can provide a continuous communications link . 9
5.3 Equipment which does not provide a continuous communications link . 9
5.4 Ancillary equipment . 9
5.5 Equipment classification . 9
6 Performance criteria . 9
6.1 General performance criteria . 9
6.2 Performance criteria for Continuous phenomena applied to ROMES and ROGNSS receivers (CR) . 10
6.3 Performance criteria for Transient phenomena applied to ROMES and ROGNSS receivers (TR). 10
6.4 Performance criteria for equipment which does not provide a continuous communication link . 10
7 Applicability overview . 11
7.1 Emission . 11
7.1.1 General . 11
7.1.2 Special conditions . 11
7.2 Immunity . 11
7.2.1 General . 11
7.2.2 Special conditions . 11
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 13
Annex B (normative): Definitions of ROMES and GNSS receivers operating in the RNSS
band within the scope of the present document . 15
B.1 Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band . 15
B.2 GNSS Receivers operating in the RNSS band . 15
Annex C (informative): Bibliography . 16
Annex D (informative): Change history . 17
ETSI

---------------------- Page: 5 ----------------------
SIST EN 301 489-19 V2.1.1:2019

4 ETSI EN 301 489-19 V2.1.1 (2019-04)
History . 18

ETSI

---------------------- Page: 6 ----------------------
SIST EN 301 489-19 V2.1.1:2019

5 ETSI EN 301 489-19 V2.1.1 (2019-04)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.2] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.
The present document is part 19 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

National transposition dates
Date of adoption of this EN: 12 June 2017
Date of latest announcement of this EN (doa): 31 July 2019
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2020
Date of withdrawal of any conflicting National Standard (dow): 31 January 2021

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 7 ----------------------
SIST EN 301 489-19 V2.1.1:2019

6 ETSI EN 301 489-19 V2.1.1 (2019-04)
1 Scope
The present document, together with ETSI EN 301 489-1 [1], covers the assessment of Receive Only Mobile Earth
Stations (ROMES) and GNSS receivers operating in the RNSS band (ROGNSS), as defined in annex B, and associated
ancillary equipment in respect of ElectroMagnetic Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of ROMES are not included
in the present document. Such technical specifications are found in the relevant product standards for the effective use
of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment and performance criteria for
ROMES and associated ancillary equipment.
ROMESs can have several configurations, including:
• portable equipment;
• fixed equipment;
• a number of modules including a display/control interface to the user.
The performance criteria used in the present document require that the satellite communications system of which the
ROMES is a part provides reliable delivery of data or messages.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and ETSI EN 301 489-1 [1], the provisions of the present document take precedence.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document. The applicable
environments referred to in ETSI EN 301 489-1 [1] where ROMES and or ROGNSS may be used should be declared
by the manufacturer.
2 References
2.1 Normative references
References are specific, identified by date of publication and/or edition number or version number. Only the cited
version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 489-1 (V2.2.0) (03-2017): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements; Harmonised Standard
covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential
requirements of article 6 of Directive 2014/30/EU".
[2] ITU-R Radio Regulations (2016).
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
ETSI

---------------------- Page: 8 ----------------------
SIST EN 301 489-19 V2.1.1:2019

7 ETSI EN 301 489-19 V2.1.1 (2019-04)
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
3 Definitions and abbreviations
3.1 Definitions
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.UHMHPQLNHElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing positioning, navigation, and timing data - Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.070.40SatelitSatellite33.060.01Radijske komunikacije na splošnoRadiocommunications in generalICS:Ta slovenski standard je istoveten z:ETSI EN 301 489-19 V2.1.1 (2019-04)SIST EN 301 489-19 V2.1.1:2019en01-junij-2019SIST EN 301 489-19 V2.1.1:2019SLOVENSKI
STANDARD



SIST EN 301 489-19 V2.1.1:2019



ETSI EN 301 489-19 V2.1.1 (2019-04) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing positioning, navigation, and timing data; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
HARMONISED EUROPEAN STANDARD SIST EN 301 489-19 V2.1.1:2019



ETSI ETSI EN 301 489-19 V2.1.1 (2019-04)2
Reference REN/ERM-EMC-366-19 Keywords data, earth station, EMC, harmonised standard, mobile, MSS, radio, receiver, regulation, satellite, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI deliverable is the one made publicly available in PDF format at www.etsi.org/deliver. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2019. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETM are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the oneM2M Partners. GSM® and the GSM logo are trademarks registered and owned by the GSM Association. SIST EN 301 489-19 V2.1.1:2019



ETSI ETSI EN 301 489-19 V2.1.1 (2019-04)3 Contents Intellectual Property Rights . 5 Foreword . 5 Modal verbs terminology . 5 1 Scope . 6 2 References . 6 2.1 Normative references . 6 2.2 Informative references . 6 3 Definitions and abbreviations . 7 3.1 Definitions . 7 3.2 Abbreviations . 7 4 Test conditions . 7 4.1 General . 7 4.2 Arrangements for test signals . 7 4.2.0 General . 7 4.2.1 Arrangements for test signals at the input of ROMES and ROGNSS receivers . 8 4.2.2 Arrangements for test signals at the output of ROMES and ROGNSS receivers . 8 4.3 Exclusion bands . 8 4.3.0 General . 8 4.3.1 Receiver exclusion band . 8 4.4 Narrow band responses of receivers . 8 4.5 Normal test modulation . 9 5 Performance assessment . 9 5.1 General . 9 5.2 Equipment which can provide a continuous communications link . 9 5.3 Equipment which does not provide a continuous communications link . 9 5.4 Ancillary equipment . 9 5.5 Equipment classification . 9 6 Performance criteria . 9 6.1 General performance criteria . 9 6.2 Performance criteria for Continuous phenomena applied to ROMES and ROGNSS receivers (CR) . 10 6.3 Performance criteria for Transient phenomena applied to ROMES and ROGNSS receivers (TR). 10 6.4 Performance criteria for equipment which does not provide a continuous communication link . 10 7 Applicability overview . 11 7.1 Emission . 11 7.1.1 General . 11 7.1.2 Special conditions . 11 7.2 Immunity . 11 7.2.1 General . 11 7.2.2 Special conditions . 11 Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 13 Annex B (normative): Definitions of ROMES and GNSS receivers operating in the RNSS band within the scope of the present document . 15 B.1 Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band . 15 B.2 GNSS Receivers operating in the RNSS band . 15 Annex C (informative): Bibliography . 16 Annex D (informative): Change history . 17 SIST EN 301 489-19 V2.1.1:2019



ETSI ETSI EN 301 489-19 V2.1.1 (2019-04)4 History . 18
SIST EN 301 489-19 V2.1.1:2019



ETSI ETSI EN 301 489-19 V2.1.1 (2019-04)5 Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.2] to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC [i.1]. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive and associated EFTA regulations. The present document is part 19 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
National transposition dates Date of adoption of this EN: 12 June 2017 Date of latest announcement of this EN (doa): 31 July 2019 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 January 2020 Date of withdrawal of any conflicting National Standard (dow): 31 January 2021
Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. SIST EN 301 489-19 V2.1.1:2019



ETSI ETSI EN 301 489-19 V2.1.1 (2019-04)6 1 Scope The present document, together with ETSI EN 301 489-1 [1], covers the assessment of Receive Only Mobile Earth Stations (ROMES) and GNSS receivers operating in the RNSS band (ROGNSS), as defined in annex B, and associated ancillary equipment in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of ROMES are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria for ROMES and associated ancillary equipment. ROMESs can have several configurations, including: • portable equipment; • fixed equipment; • a number of modules including a display/control interface to the user. The performance criteria used in the present document require that the satellite communications system of which the ROMES is a part provides reliable delivery of data or messages. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and ETSI EN 301 489-1 [1], the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document. The applicable environments referred to in ETSI EN 301 489-1 [1] where ROMES and or ROGNSS may be used should be declared by the manufacturer. 2 References 2.1 Normative references References are specific, identified by date of publication and/or edition number or version number. Only the cited version applies. Referenced documents which are not found to be publicly available in the expected location might be found at https://docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. [1] ETSI EN 301 489-1 (V2.2.0) (03-2017): "ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive 2014/30/EU". [2] ITU-R Radio Regulations (2016). 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. SIST EN 301 489-19 V2.1.1:2019



ETSI ETSI EN 301 489-19 V2.1.1 (2019-04)7 NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC. [i.2] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request to the European Committee for Electrotechnical Standardisation and to the European Telecommunications Standards Institute as regards radio equipment in support of Directive 2014/53/EU of the European Parliament and of the Council. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ET
...

Draft ETSI EN 301 489-19 V2.1.0 (2017-03)






HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 19: Specific conditions for Receive Only Mobile
Earth Stations (ROMES) operating in the 1,5 GHz band
providing data communications and GNSS receivers operating in the RNSS
band (ROGNSS) providing positioning, navigation, and timing data;
Harmonised Standard covering the essential requirements
of article 3.1(b) of Directive 2014/53/EU

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 301 489-19 V2.1.0 (2017-03)



Reference
REN/ERM-EMC-366-19
Keywords
data, earth station, EMC, mobile, MSS, radio,
receiver, regulation, satellite, testing

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2017.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 301 489-19 V2.1.0 (2017-03)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions and abbreviations . 7
3.1 Definitions . 7
3.2 Abbreviations . 7
4 Test conditions . 7
4.1 General . 7
4.2 Arrangements for test signals . 7
4.2.0 General . 7
4.2.1 Arrangements for test signals at the input of ROMES and ROGNSS receivers . 8
4.2.2 Arrangements for test signals at the output of ROMES and ROGNSS receivers . 8
4.3 Exclusion bands . 8
4.3.0 General . 8
4.3.1 Receiver exclusion band . 8
4.4 Narrow band responses of receivers . 8
4.5 Normal test modulation . 9
5 Performance assessment . 9
5.1 General . 9
5.2 Equipment which can provide a continuous communications link . 9
5.3 Equipment which does not provide a continuous communications link . 9
5.4 Ancillary equipment . 9
5.5 Equipment classification . 9
6 Performance criteria . 9
6.1 General performance criteria . 9
6.2 Performance criteria for Continuous phenomena applied to ROMES and ROGNSS receivers (CR) . 10
6.3 Performance criteria for Transient phenomena applied to ROMES and ROGNSS receivers (TR). 10
6.4 Performance criteria for equipment which does not provide a continuous communication link . 10
7 Applicability overview . 11
7.1 Emission . 11
7.1.1 General . 11
7.1.2 Special conditions . 11
7.2 Immunity . 11
7.2.1 General . 11
7.2.2 Special conditions . 11
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 13
Annex B (normative): Definitions of ROMES and GNSS receivers operating in the RNSS
band within the scope of the present document . 15
B.1 Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band . 15
B.2 GNSS Receivers operating in the RNSS band . 15
Annex C (informative): Bibliography . 16
Annex D (informative): Change history . 17
ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 301 489-19 V2.1.0 (2017-03)
History . 18

ETSI

---------------------- Page: 4 ----------------------
5 Draft ETSI EN 301 489-19 V2.1.0 (2017-03)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.2] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.1].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.
The present document is part 19 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 5 ----------------------
6 Draft ETSI EN 301 489-19 V2.1.0 (2017-03)
1 Scope
The present document, together with ETSI EN 301 489-1 [1], covers the assessment of Receive Only Mobile Earth
Stations (ROMES) and GNSS receivers operating in the RNSS band (ROGNSS), as defined in annex B, and associated
ancillary equipment in respect of ElectroMagnetic Compatibility (EMC).
Technical specifications related to the antenna port and emissions from the enclosure port of ROMES are not included
in the present document. Such technical specifications are found in the relevant product standards for the effective use
of the radio spectrum.
The present document specifies the applicable test conditions, performance assessment and performance criteria for
ROMES and associated ancillary equipment.
ROMESs can have several configurations, including:
• portable equipment;
• fixed equipment;
• a number of modules including a display/control interface to the user.
The performance criteria used in the present document require that the satellite communications system of which the
ROMES is a part provides reliable delivery of data or messages.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and ETSI EN 301 489-1 [1], the provisions of the present document take precedence.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document. The applicable
environments referred to in ETSI EN 301 489-1 [1] where ROMES and or ROGNSS may be used should be declared
by the manufacturer.
2 References
2.1 Normative references
References are specific, identified by date of publication and/or edition number or version number. Only the cited
version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 489-1 (V2.2.0) (03-2017): "Electromagnetic compatibility and Radio spectrum
Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements".
[2] ITU-R Radio Regulations (2016).
ETSI

---------------------- Page: 6 ----------------------
7 Draft ETSI EN 301 489-19 V2.1.0 (2017-03)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.2] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ETSI EN 301 489-1 [1] and the following
apply:
stand-by mode of operation: mode of operation in which the receiver is capable of receiving calls
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
CR Continuous phenomena applied to ROMES and ROGNSS
EMC ElectroMagnetic Compatibility
EUT Equipment Under Test
GNSS Global Navigation Satellite System
LMSS Land Mobile Satellite Service
RF Radio Frequency
ROGNSS Receive Only Global Navigation Satellite System
RNSS Radio-Navigation Satellite Service
ROMES Receive Only Mobile Earth Station
TR Transient phenomena applied to ROMES and ROGNSS
4 Test conditions
4.1 General
For emission and immunity tests the test modulation, test arrangements, etc., as specified in the present document,
clauses 4.1 to 4.5, shall apply.
In the following clauses, the Equipment Und
...