FprEN IEC 60794-1-201:2024
(Main)Optical fibre cables - Part 1-201: Generic specification - Basic optical cable test procedures - Environmental test methods - Temperature cycling, method F1
Optical fibre cables - Part 1-201: Generic specification - Basic optical cable test procedures - Environmental test methods - Temperature cycling, method F1
IEC 60794-1-201: 2024 defines test procedures to be used in establishing uniform requirements for the environmental performance of: - optical fibre cables for use with telecommunication equipment and devices employing similar techniques; and - cables having a combination of both optical fibres and electrical conductors. Throughout this document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc. This document defines a test standard to determine the ability of a cable to withstand the effects of temperature cycling by observing changes in attenuation. See IEC 60794-1-2 for a reference guide to test methods of all types and for general requirements and definitions. This document partially replaces IEC 60794-1-22:2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 60794-1-22:2017: a) all references to the temperature sensing device have been removed and replaced with a note "for further study"; b) the conditioning procedure has been separated into Procedure 1 and Procedure 2 to avoid confusion; c) the ambient temperature test condition has been defined as per IEC 60794-1-2; d) the minimum soak time has been decreased for sample mass >16 kg in Table 1.
Lichtwellenleiterkabel - Teil 1-201: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Temperaturwechsel, Verfahren F1
Câbles à fibres optiques - Partie 1-201: Spécification générique - Procédures fondamentales d’essai des câbles optiques - Méthodes d’essai d’environnement - Cycles de température, méthode F1
L’IEC 60794-1-201:2024 définit les procédures d’essai à utiliser pour définir des exigences harmonisées pour les performances environnementales: - des câbles à fibres optiques destinés à être utilisés avec les équipements et dispositifs de télécommunications employant des techniques similaires; et - des câbles combinant fibres optiques et conducteurs électriques. Dans le présent document, le terme "câble optique" peut également englober les unités de fibres optiques, les unités de fibres en microconduit, etc. Le présent document définit une norme d’essai pour déterminer l’aptitude d’un câble à résister aux effets de cycles de température, en observant les variations de l’affaiblissement. Se reporter à l’IEC 60794-1-2 comme guide de référence des méthodes d’essai de tous types, et pour consulter les exigences générales et les définitions.
Optični kabli - 1-201. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Okoljske preskusne metode - Ciklične temperaturne spremembe, metoda F1
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 60794-1-201:2023
01-maj-2023
Optični kabli - 1-201. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Ciklične temperaturne spremembe, metoda F1
Optical fibre cables - Part 1-201: Generic specification - Basic optical cable test
procedures - Temperature cycling, Method F1
Ta slovenski standard je istoveten z: prEN IEC 60794-1-201:2023
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
oSIST prEN IEC 60794-1-201:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 60794-1-201:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60794-1-201:2023
86A/2290/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60794-1-201 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-03-17 2023-06-09
SUPERSEDES DOCUMENTS:
86A/2230/CD, 86A/2280/CC
IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are
reminded that the enquiry stage is the final stage for submitting "in some countries" clauses. See AC/22/2007.
TITLE:
Optical fibre cables - Part 1-201: Generic specification - Basic optical cable test procedures -
Temperature cycling, Method F1
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download
this electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee
positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other
purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60794-1-201:2023
IEC CDV 60794-1-201/Ed1 © IEC 2023 – 2 – 86A/2290/CDV
1 CONTENTS
2 CONTENTS . 1
3 FOREWORD . 3
4 1 Scope . 5
5 2 Normative references . 5
6 3 Terms and definitions . 5
7 4 Method F1 – Temperature cycling . 5
8 4.1 Object . 5
9 4.2 Sample . 6
10 4.3 Apparatus . 7
11 4.4 Procedure . 7
12 4.4.1 Preconditioning . 7
13 4.4.2 Initial measurement . 7
14 4.4.3 Conditioning . 7
15 4.4.4 Recovery . 9
16 4.5 Requirements . 9
17 4.6 Details to be specified .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.