Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und Sicherheit - Teil 1: Lampensockel

Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et de la sécurité - Partie 1: Culots de lampes

Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne zamenljivosti in varnosti - 1. del: Vznožki žarnic in sijalk - Dopolnilo A57 (IEC 60061-1:1969/A57:2017)

General Information

Status
Published
Publication Date
22-Mar-2018
Withdrawal Date
18-Jan-2021
Current Stage
6060 - Document made available - Publishing
Start Date
23-Mar-2018
Completion Date
23-Mar-2018

Relations

Buy Standard

Amendment
EN 60061-1:1999/A57:2018
English and French language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2018
Vznožki in okovi žarnic in sijalk skupaj s kalibri za kontrolo medsebojne
zamenljivosti in varnosti - 1. del: Vznožki žarnic in sijalk - Dopolnilo A57 (IEC
60061-1:1969/A57:2017)
Lamp caps and holders together with gauges for the control of interchangeability and
safety - Part 1: Lamp caps (IEC 60061-1:1969/A57:2017)
Lampensockel und -fassungen sowie Lehren zur Kontrolle der Austauschbarkeit und
Sicherheit - Teil 1: Lampensockel (IEC 60061-1:1969/A57:2017)
Culots de lampes et douilles ainsi que calibres pour le contrôle de l'interchangeabilité et
de la sécurité - Partie 1: Culots de lampes (IEC 60061-1:1969/A57:2017)
Ta slovenski standard je istoveten z: EN 60061-1:1993/A57:2018
ICS:
29.140.10 Grla in držala žarnic Lamp caps and holders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60061-1:1993/A57

NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2018
ICS 29.140.10
English Version
Lamp caps and holders together with gauges for the control of
interchangeability and safety - Part 1: Lamp caps
(IEC 60061-1:1969/A57:2017)
Culots de lampes et douilles ainsi que calibres pour le Lampensockel und -fassungen sowie Lehren zur Kontrolle
contrôle de l'interchangeabilité et de la sécurité - Partie 1: der Austauschbarkeit und Sicherheit - Teil 1: Lampensockel
Culots de lampes (IEC 60061-1:1969/A57:2017)
(IEC 60061-1:1969/A57:2017)
This amendment A57 modifies the European Standard EN 60061-1:1993; it was approved by CENELEC on 2018-01-19. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60061-1:1993/A57:2018 E

European foreword
The text of document 34B/1932/FDIS, future edition 1 of IEC 60061-1:1969/A57, prepared by
IEC/SC 34B "Lamp caps and holders" of IEC/TC 34 “Lamps and related equipment” was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 60061-1:1993/A57:2018.

The following dates are fixed:
• latest date by which the document has to be (dop) 2018-10-19
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2021-01-19
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60061-1:1969/A57:2017 was approved by CENELEC as a
European Standard without any modification.
NORME IEC
INTERNATIONALE
INTERNATIONAL 60061-1
STANDARD
AMENDEMENT 57
AMENDMENT 57
2017-12
Amendement 57
Culots de lampes et douilles ainsi que calibres

pour le contrôle de l'interchangeabilité
et de la sécurité –
Partie 1:
Culots de lampes
Amendment 57
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 1:
Lamp caps
Les feuilles de cet amendement sont à insérer dans
l'IEC 60061­1 (1969)
The sheets contained in this amendment are to be inserted
in IEC 60061­1 (1969)
 IEC 2017 Droits de reproduction réservés  Copyright - all rights reserved

International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch

NORME IEC
INTERNATIONALE
INTERNATIONAL
60061-1
STANDARD
Edition 3.57
2017-12
Modifiée selon les Compléments:
Amended in accordance with Supplements:

A(1970), B(1971), C(1972), D(1972), E(1972), F(1975), G(1977)
H(1977), J(1980), K(1983), L(1987), M(1989), N(1992), P(1994)

Q(1994), R(1995), S(1996), T(1996), U(1996), V(1997),
et les amendements/and amendments 21(1998), 22(1999), 23(1999), 24(2000), 25(2001), 26(2001),
27(2001), 28(2002), 29(2002), 30(2002), 31(2003), 32(2003), 33(2003), 34(2004), 35(2004), 36(2005),
37(2006), 38(2007), 39(2007), 40(2008), 41(2009), 42(2009), 43(2010), 44(2010), 45(2010), 46(2011),
47(2011), 48(2012), 49(2013), 50(2013), 51(2014), 52(2015), 53(2015), 54(2016), 55(2016), 56(2017)
et/and 57(2017)
Culots de lampes et douilles ainsi que calibres
pour le contrôle de l'interchangeabilité

et de la sécurité –
Partie 1:
Culots de lampes
Lamp caps and holders together with
gauges for the control of interchangeability
and safety –
Part 1:
Lamp caps
 IEC 2017 Droits de reproduction réservés  Copyright - all rights reserved

Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch

IEC 60061-1:1969/AMD57:2017  IEC 2017 – 1 –

SOMMAIRE CONTENTS
SOMMAIRE PAR DÉSIGNATION CONTENTS BY DESIGNATION
Feuilles Sheet
Culots à deux broches G1.27, GX1.27 & GY1.3 . 7004-2-2 Bi-pin caps G1.27, GX1.27 & GY1.3 . 7004-2-2
Culots à deux broches G2.54, GX2.54 & GY2.5 . 7004-3-2 Bi-pin caps G2.54, GX2.54 & GY2.5 . 7004-3-2
Culots PX26d, PY26d-1 … PY26d-7 . 7004-5-7 Caps PX26d, PY26d-1 … PY26d-7 . 7004-5-7
Culots à vis E11 . 7004-6-1 Screw caps E11 . 7004-6-1
Culots à vis EY10 . 7004-7-1 Screw caps EY10 . 7004-7-1
Culots à baïonnette BAX9s . 7004-8-1 Bayonet caps BAX9s . 7004-8-1
Culots à baïonnette BAY9s . 7004-9-1 Bayonet caps BAY9s . 7004-9-1
Culots B22d . 7004-10-7 Caps B22d . 7004-10-7
Culot à baïonnette B22d-3(90°/135°)/25x26 . 7004-10A-2 Bayonet cap B22d-3(90°/135°)/25x26 . 7004-10A-2
Culots B15d . 7004-11-6 Caps B15d . 7004-11-6
Culots à baïonnette BA15 . 7004-11A-10 Bayonet caps BA15 . 7004-11A-10
Culots à baïonnette BAY15d/BAY15s. 7004-11B-8 Bayonet caps BAY15d. 7004-11B-8
Culots BAZ15 . 7004-11C-3 Caps BAZ15 . 7004-11C-3
Culots à baïonnette BA15s-3 . 7004-11D-2 Bayonet caps BA15s-3. 7004-11D-2
Culots BAW15 . 7004-11E-1 Caps BAW15 . 7004-11E-1
Culots à baïonnette BA20 . 7004-12-7 Bayonet caps BA20 . 7004-12-7
Culots à baïonnette pour automobiles Bayonet automobile caps
BA21-3(120°) . 7004-13-4 BA21-3(120°) . 7004-13-4
Culot à baïonnette BA9 . 7004-14-9 Bayonet caps BA9 . 7004-14-9
Culot à baïonnette BA7 . 7004-15-2 Bayonet cap BA7 . 7004-15-2
Culot à baïonnette BY22d . 7004-17-3 Bayonet cap BY22d . 7004-17-3
Culots à baïonnette BAX15d . 7004-18-2 Bayonet caps BAX15d. 7004-18-2
Culots BAU15 . 7004-19-2 Caps BAU15 . 7004-19-2
Connecteur des lampes terminées G16d . 7004-20-2 Termination on finished lamps G16d . 7004-20-2
Culots à vis E27 . 7004-21-10 Screw caps E27 . 7004-21-10
Culots à vis E26 . 7004-21A-3 Screw caps E26 . 7004-21A-3
Culots à vis E10 . 7004-22-6 Screw caps E10 . 7004-22-6
Culots à vis E14 . 7004-23-7 Screw caps E14 . 7004-23-7
Culots à vis E40 . 7004-24-7 Screw caps E40 . 7004-24-7
Culots à vis E39 . 7004-24A-1 Screw caps E39 . 7004-24A-1
Culot à vis E5 . 7004-25-3 Screw cap E5 . 7004-25-3
Culot à vis E17 . 7004-26-2 Screw cap E17 . 7004-26-2
Culot à vis E27/51x39 . 7004-27-3 Screw cap E27/51x39 . 7004-27-3
Culot à vis E12 . 7004-28-2 Screw cap E12 . 7004-28-2
Culot à vis à double contact E26d . 7004-29-2 Double contact screw cap E26d . 7004-29-2
Culots à vis préfocus EP10 . 7004-30-2 Prefocus screw caps EP10 . 7004-30-2
Culots préfocus P20d, PX20d, PY20d & PZ20d . 7004-31-2 Prefocus caps P20d, PX20d, PY20d & PZ20d . 7004-31-2
Culots préfocus P22d & PX22d . 7004-32-2 Prefocus caps P22d & PX22d . 7004-32-2
Culots 2G13 . 7004-33-4 Caps 2G13 . 7004-33-4
Culots préfocus - Assemblage de la collerette Prefocus caps - Assembly of ring and cap
et du culot sur lampes terminées PX43t . 7004-34-2 on finished lamps PX43t . 7004-34-2
Culot préfocus PX13.5s . 7004-35-2 Prefocus cap PX13.5s . 7004-35-2
Culot préfocus P26s sur la lampe terminée . 7004-36-1 Prefocus cap P26s on finished lamp . 7004-36-1
Culots préfocus - Assemblage de la collerette Prefocus caps - Assembly of ring and
et du culot sur lampes terminées PKX22s . 7004-37-2 cap on finished lamps PKX22s . 7004-37-2

IEC 60061-1
IEC 60061-1:1969/AMD57:2017  IEC 2017 – 2 –

Feuilles Sheet
Culots préfocus P43t . 7004-39-6 Prefocus caps P43t . 7004-39-6
Culot préfocus P13.5s . 7004-40-2 Prefocus cap P13.5s . 7004-40-2
Culots préfocus P28s . 7004-42-7 Prefocus caps P28s . 7004-42-7
Culots pré
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.