EN 60317-0-6:2001
(Main)Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
IEC 60317-0-6:2001 specifies general requirements of glass-fibre wound resin or varnish impregnated, bare or enamelled, round copper winding wires. The range of nominal conductor diameters is given in the relevant specification sheet. When a reference is made to a winding wire according to one of the IEC 60317 series, the following information should be given in the description: – reference to IEC specification; – nominal conductor diameter in millimetres; – grade of coating and glass covering. EXAMPLE: IEC 60317-48 0,500 1G2
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 0-6: Allgemeine Anforderungen - Runddrähte aus Kupfer, blank oder lackisoliert, mit Glasgewebe umsponnen und mit Harz oder Lack imprägniert
Spécifications pour types particuliers de fils de bobinage - Partie 0-6: Prescriptions générales - Fil de section circulaire en cuivre nu ou émaillé, guipé de fibres de verre imprégnées de résine ou de vernis
IEC 60317-0-6:2001 spécifie les prescriptions générales relatives au fil de section circulaire en cuivre, nu ou émaillé, recouvert d'un guipage de fibres de verre imprégnées de résine ou de vernis. La gamme des diamètres nominaux des conducteurs est donnée dans la feuille de spécification applicable. Quand il est fait référence à un fil de bobinage conforme à l'une des spécifications de la série IEC 60317, il est recommandé que les informations suivantes soient données dans la description: – référence de la spécification IEC; – diamètre nominal du conducteur en millimètres; – grade du revêtement et de l’enveloppe de fibre de verre. EXEMPLE: IEC 60317-48 0,500 1G2
Specifications for particular types of winding wires – Part 0–6: General requirements – Glass–fibre wound resin or varnish impregnated, bare or enamelled round copper wire
General Information
- Status
- Withdrawn
- Publication Date
- 18-Jul-2001
- Withdrawal Date
- 31-May-2004
- Technical Committee
- CLC/TC 55 - Winding wires
- Drafting Committee
- IEC/TC 55 - IEC_TC_55
- Parallel Committee
- IEC/TC 55 - IEC_TC_55
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 14-Jul-2023
- Completion Date
- 14-Jul-2023
Relations
- Effective Date
- 11-Aug-2020
- Effective Date
- 29-Jan-2023
Get Certified
Connect with accredited certification bodies for this standard
UL Solutions
Global safety science company with testing, inspection and certification.
CEPREI Certification Center (Guangzhou Saibao)
Pioneer of third-party certification, subsidiary of Electronic Fifth Research Institute.
CESI Beijing Certification (Saisi)
Subsidiary of China Electronics Standardization Institute (CESI), established 1963.
Sponsored listings
Frequently Asked Questions
EN 60317-0-6:2001 is a standard published by CLC. Its full title is "Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire". This standard covers: IEC 60317-0-6:2001 specifies general requirements of glass-fibre wound resin or varnish impregnated, bare or enamelled, round copper winding wires. The range of nominal conductor diameters is given in the relevant specification sheet. When a reference is made to a winding wire according to one of the IEC 60317 series, the following information should be given in the description: – reference to IEC specification; – nominal conductor diameter in millimetres; – grade of coating and glass covering. EXAMPLE: IEC 60317-48 0,500 1G2
IEC 60317-0-6:2001 specifies general requirements of glass-fibre wound resin or varnish impregnated, bare or enamelled, round copper winding wires. The range of nominal conductor diameters is given in the relevant specification sheet. When a reference is made to a winding wire according to one of the IEC 60317 series, the following information should be given in the description: – reference to IEC specification; – nominal conductor diameter in millimetres; – grade of coating and glass covering. EXAMPLE: IEC 60317-48 0,500 1G2
EN 60317-0-6:2001 is classified under the following ICS (International Classification for Standards) categories: 29.060.10 - Wires. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60317-0-6:2001 has the following relationships with other standards: It is inter standard links to EN IEC 60317-0-6:2020, EN 60317-0-6:2001/A1:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 60317-0-6:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2002
Specifications for particular types of winding wires – Part 0–6: General
requirements – Glass–fibre wound resin or varnish impregnated, bare or
enamelled round copper wire
Specifications for particular types of winding wires -- Part 0-6: General requirements -
Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten -- Teil 0-6:
Allgemeine Anforderungen - Runddrähte aus Kupfer, blank oder lackisoliert, mit
Glasgewebe umsponnen und mit Harz oder Lack imprägniert
Spécifications pour types particuliers de fils de bobinage -- Partie 0-6: Prescriptions
générales - Fil de section circulaire en cuivre nu ou émaillé, guipé de fibres de verre
imprégnées de résine ou de vernis
Ta slovenski standard je istoveten z: EN 60317-0-6:2001
ICS:
29.060.10 Žice Wires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...