EN 62149-9:2014

SLOVENSKI STANDARD
01-oktober-2014
$NWLYQHNRPSRQHQWHLQQDSUDYHRSWLþQLKYODNHQ,]YHGEHQLVWDQGDUGLGHO
2GGDMQRVSUHMHPQLPRGXOL]GRSLUDQLPLRGVHYQLPLSROSUHYRGQLãNLPLRSWLþQLPL
RMDþHYDOQLNL,(&
Fibre optic active components and devices - Performance standards - Part 9: Seeded
reflective semiconductor optical amplifier transceivers
Ta slovenski standard je istoveten z: EN 62149-9:2014
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62149-9
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2014
ICS 33.180.20
English Version
Fibre optic active components and devices - Performance
standards - Part 9: Seeded reflective semiconductor optical
amplifier transceivers
(IEC 62149-9:2014)
Composants et dispositifs actifs à fibres optiques - Normes Aktive Lichtwellenleiterbauelemente und geräte -
de performances - Partie 9: Émetteurs-récepteurs Betriebsverhalten - Teil 9: Injizierte reflektierende optische
amplificateurs optiques à semiconducteurs réfléchissants Halbleiterverstärker-Sende- und Empfangsmodule
répartis (IEC 62149-9:2014)
(CEI 62149-9:2014)
This European Standard was approved by CENELEC on 2014-05-29. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62149-9:2014 E
Foreword
The text of document 86C/1145/CDV, future edition 1 of IEC 62149-9, prepared by SC 86C, "Fibre optic
systems and active devices", of IEC TC 86, "Fibre optics" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 62149-9:2014.
The following dates are fixed:
(dop) 2015-02-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-05-29
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 62149-9:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:

IEC 60191 (all parts) NOTE Harmonized as EN 60191 (all parts).
IEC 60747-5-1 NOTE Harmonized as EN 60747-5-1.
IEC 60749 (all parts) NOTE Harmonized as EN 60749 (all parts).
IEC 60825 (all parts) NOTE Harmonized as EN 60825 (all parts).
IEC 60874 (all parts) NOTE Harmonized as EN 60874 (all parts).
IEC 61290-1-3 NOTE Harmonized as EN 61290-1-3.
IEC 62007-1 NOTE Harmonized as EN 62007-1.
IEC 62007-2 NOTE Harmonized as EN 62007-2.
IEC 62148-1 NOTE Harmonized as EN 62148-1.
IEC 62149-1 NOTE Harmonized as EN 62149-1.
IEC 62149-4 NOTE Harmonized as EN 62149-4.

- 3 - EN 62149-9:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by
(mod), the relevant EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-6 -  Environmental testing -- Part 2-6: Tests - EN 60068-2-6 -
Test Fc: Vibration (sinusoidal)
IEC 60068-2-20 -  Environmental testing -- Part 2-20: Tests - EN 60068-2-20 -
Test T: Test methods for solderability and
resistance to soldering heat of devices with
leads
IEC 60068-2-27 -  Environmental testing -- Part 2-27: Tests - EN 60068-2-27 -
Test Ea and guidance: Shock
IEC 60068-2-38 -  Environmental testing -- Part 2-38: Tests - EN 60068-2-38 -
Test Z/AD: Composite temperature/humidity
cyclic test
IEC 60068-2-78 -  Environmental testing -- Part 2-78: Tests - EN 60068-2-78 -
Test Cab: Damp heat, steady state
IEC 60749-25 -  Semiconductor devices - Mechanical and EN 60749-25 -
climatic test methods -- Part 25:
Temperature cycling
IEC 60749-26 -  Semiconductor devices - Mechanical and EN 60749-26 -
climatic test methods -- Part 26: Electrostatic
discharge (ESD) sensitivity testing - Human
body model (HBM)
2) 1)
IEC 60825-1 -  Safety of laser products -- Part 1: Equipment EN 60825-1 -
classification and requirements
2) 3)
IEC 60950-1 (mod) -  Information technology equipment - Safety -- EN 60950-1 2006
Part 1: General requirements
3)
+A11 2009
3)
+ A1 2010
3)
+A12 2011
3)
+AC 2011
3)
+ A2 2013
IEC 61300-2-47 -  Fibre optic interconnecting devices and EN 61300-2-47 -
passive components - Basic test and
measurement procedures -- Part 2-47: Tests
- Thermal shocks
IEC Guide 107 -  Electromagnetic compatibility - Guide to the - -
drafting of electromagnetic compatibility
publications
ITU-T 2012 Multichannel seeded DWDM applications -
Recommendation with single channel optical interfaces
G.698.3
ITU-T 2006 Optical interface for single channel STM-64 -
Recommendation and other SDH systems with optical
G.691 amplifiers
1)
prEN at date of issue.
2)
Undated reference.
3)
Valid edition at date of issue.

IEC 62149-9 ®
Edition 1.0 2014-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic active components and devices – Performance standards –

Part 9: Seeded reflective semiconductor optical amplifier transceivers

Composants et dispositifs actifs à fibres optiques – Normes de performances –

Partie 9: Émetteurs-récepteurs amplificateurs optiques à semiconducteurs

réfléchissants répartis
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX Q
ICS 33.180.20 ISBN 978-2-8322-1542-5

– 2 – IEC 62149-9:2014 © IEC 2014
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols and abbreviations . 7
3.1 Terms and definitions. 7
3.2 Symbols and abbreviations . 7
4 Product parameters . 8
4.1 Absolute limiting ratings . 8
4.2 Operating environment . 8
4.3 Functional specification . 9
5 Testing . 9
5.1 General . 9
5.2 Characterization testing . 9
5.3 Performance testing . 9
6 Environmental specifications . 9
6.1 General safety . 9
6.2 Laser safety . 9
6.3 Electromagnetic compatibility (EMC) requirements . 9
Annex A (normative) Specifications for seeded RSOA transceivers . 10
A.1 Absolute limiting ratings . 10
A.2 Operating environment . 10
A.3 Functional specification . 10
A.4 Diagrams . 11
A.5 Labelling . 12
A.6 Testing . 12
A.6.1 General . 12
A.6.2 Characterization testing . 12
A.6.3 Performance testing . 13
Annex B (normative) Sample size, sequencing and grouping requirements . 15
Bibliography . 16

Figure 1 – Seeded DWDM transmission based on RSOA transceivers . 5
Figure A.1 – Receiver section schematic . 12
Figure A.2 – Transmitter section schematic . 12

Table 1 – Operating environment . 8
Table A.1 – Absolute limiting ratings . 10
Table A.2 – Receiver section: functional specification . 10
Table A.3 – Transmitter section: functional specification . 11
Table A.4 – Transmitter section characterization tests . 13
Table A.5 – Receiver section characterization tests . 13
Table A.6 – Performance test plan . 14
Table B.1 – Sample size, sequencing and grouping requirements . 15

IEC 62149-9:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PERFORMANCE STANDARDS –
Part 9: Seeded reflective semiconductor optical amplifier transceivers

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entr
...