EN IEC 62149-3:2023
(Main)Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems
Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems
IEC 62149-3: 2023 covers the performance specification for electroabsorption (EA) type optical modulators monolithically integrated with laser diodes for 40 Gbit/s fibre optic transmission systems. This document contains definitions for product performance requirements as well as a series of tests and measurements, for which clearly defined conditions, severities and pass/fail criteria are provided. The tests are intended to be run as an initial design verification to prove any product's ability to satisfy this document's requirements. This document is applicable for on-off keying modulation formats. A product that has been shown to meet all the requirements of a performance standard can be declared as compliant with the performance standard but will then be controlled by a quality assurance program. This fourth edition cancels and replaces the third edition published in 2020. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) specification of pull force for fibre pull test in Table 6 according to fibre type; b) change of symbol for kink free radiant power in Table 4 and Table 5; c) replacement of undefined symbols in Table 7; d) addition of IEC 62149-1 as a normative reference.
Aktive Lichtwellenleiterbauelemente und -bauteile - Betriebsverhaltensnormen - Teil 3: Modulator-integrierte Laserdioden-Sender für 40 Gbit/s-Lichtwellenleiter-Übertragungssysteme
Composants et dispositifs actifs fibroniques - Normes de performances - Partie 3: Émetteurs à diodes laser à modulateur intégré pour systèmes de transmission fibroniques 40 Gbit/s
IEC 62149-3: 2023 couvre les spécifications de performance concernant les modulateurs optiques à électroabsorption (EA) avec diodes laser intégrées de façon monolithique, destinés à des systèmes de transmission fibroniques 40 Gbit/s. Le présent document contient des définitions des exigences de performances de produits, ainsi qu’une série d’essais et de mesures, avec des conditions, des sévérités et des critères d’acceptation/de rejet clairement définis. Les essais sont destinés à être réalisés à titre de vérification initiale de conception, pour prouver la capacité d’un quelconque produit à satisfaire aux exigences du présent document. Le présent document s’applique aux formats de modulation tout ou rien. Un produit qui a montré qu’il satisfaisait à toutes les exigences d’une norme de performance peut être déclaré comme conforme à la norme de performance, mais il est ensuite contrôlé selon un programme d’assurance de la qualité. Cette quatrième édition annule et remplace la troisième édition parue en 2020. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) spécification de la force de traction pour l’essai de traction sur fibre dans le Tableau 6 selon le type de fibre; b) modification du symbole pour la puissance rayonnée sans non-linéarité dans le Tableau 4 et dans le Tableau 5; c) remplacement des symboles non définis dans le Tableau 7; d) ajout de l’IEC 62149-1 comme référence normative.
Optične aktivne komponente in naprave - Izvedbeni standardi - 3. del: Laserski diodni oddajniki z integriranim modulatorjem za optične prenosne sisteme 40 Gbit/s (IEC 62149-3:2023)
Ta del standarda IEC 62149 zajema specifikacijo delovanja za elektroabsorpcijske (EA) optične modulatorje z monolitno integriranimi laserskimi diodami za 40-Gbit/s sisteme za prenos optičnih vlaken. Ta dokument vsebuje opredelitve zahtev glede učinkovitosti izdelka ter vrsto preskusov in meritev, za katere so jasno opredeljeni pogoji, zahtevnost in merila za uspešno/neuspešno opravljen preskus. Preskusi so namenjeni preverjanju začetnega projektiranja, s katerim se dokaže, ali lahko izdelek izpolnjuje zahteve tega dokumenta.
Ta dokument se uporablja za vklopno-izklopne formate modulacije.
Izdelek, ki dokazano izpolnjuje vse zahteve izvedbenega standarda, je mogoče šteti za skladen z izvedbenim standardom, vendar ga bo v tem primeru nadzoroval program za zagotavljanje skladnosti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2023
Optične aktivne komponente in naprave - Izvedbeni standardi - 3. del: Laserski
diodni oddajniki z integriranim modulatorjem za optične prenosne sisteme 40
Gbit/s (IEC 62149-3:2023)
Fibre optic active components and devices - Performance standards - Part 3: Modulator-
integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems (IEC
62149-3:2023)
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 3: Sender mit
modulatorintegrierten Laserdioden für 40 Gbit/s-Lichtwellenleiter-Übertragungssysteme
(IEC 62149-3:2023)
Composants et dispositifs actifs fibroniques - Normes de performances - Partie 3:
Émetteurs à diodes laser à modulateur intégré pour systèmes de transmission
fibroniques 40 Gbit/s (IEC 62149-3:2023)
Ta slovenski standard je istoveten z: EN IEC 62149-3:2023
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62149-3
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2023
ICS 33.180.20 Supersedes EN IEC 62149-3:2020;
EN IEC 62149-3:2020/AC:2021-03
English Version
Fibre optic active components and devices - Performance
standards - Part 3: Modulator-integrated laser diode transmitters
for 40-Gbit/s fibre optic transmission systems
(IEC 62149-3:2023)
Composants et dispositifs actifs fibroniques - Normes de Aktive Lichtwellenleiterbauelemente und -geräte -
performances - Partie 3: Émetteurs à diodes laser à Betriebsverhaltensnormen - Teil 3: Modulator-integrierte
modulateur intégré pour systèmes de transmission Laserdioden-Sender für 40 Gbit/s-Lichtwellenleiter-
fibroniques 40 Gbit/s Übertragungssysteme
(IEC 62149-3:2023) (IEC 62149-3:2023)
This European Standard was approved by CENELEC on 2023-08-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62149-3:2023 E
European foreword
The text of document 86C/1839/CDV, future edition 4 of IEC 62149-3, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62149-3:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-05-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-08-23
document have to be withdrawn
This document supersedes EN IEC 62149-3:2020 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62149-3:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60068 (series) NOTE Approved as EN 60068 (series)
IEC 60793 (series) NOTE Approved as EN IEC 60793 (series)
IEC 60825 (series) NOTE Approved as EN 60825 (series)
IEC 60874 (series) NOTE Approved as EN 60874 (series)
IEC 61280 (series) NOTE Approved as EN IEC 61280 (series)
IEC 62007-2 NOTE Approved as EN 62007-2
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-1 - Environmental testing - Part 2-1: Tests - EN 60068-2-1 -
Test A: Cold
IEC 60068-2-2 - Environmental testing - Part 2-2: Tests - EN 60068-2-2 -
Test B: Dry heat
IEC 60068-2-6 - Environmental testing - Part 2-6: Tests - EN 60068-2-6 -
Test Fc: Vibration (sinusoidal)
IEC 60068-2-14 - Environmental testing - Part 2-14: Tests - EN 60068-2-14 -
Test N: Change of temperature
IEC 60068-2-27 - Environmental testing - Part 2-27: Tests - EN 60068-2-27 -
Test Ea and guidance: Shock
IEC 60068-2-78 - Environmental testing - Part 2-78: Tests - EN 60068-2-78 -
Test Cab: Damp heat, steady state
IEC 60749-7 - Semiconductor devices - Mechanical and EN 60749-7 -
climatic test methods - Part 7: Internal
moisture content measurement and the
analysis of other residual gases
IEC 60749-26 - Semiconductor devices - Mechanical and EN IEC 60749-26 -
climatic test methods - Part 26:
Electrostatic discharge (ESD) sensitivity
testing - Human body model (HBM)
IEC 60825-1 - Safety of laser products - Part 1: EN 60825-1 -
Equipment classification and requirements
IEC 60950-1 - Information technology equipment - Safety -
- Part 1: General requirements
IEC 61300-2-4 - Fibre optic interconnecting devices and EN IEC 61300-2-4 -
passive components - Basic test and
measurement procedures - Part 2-4: Tests
- Fibre or cable retention
IEC 62007-1 - Semiconductor optoelectronic devices for EN 62007-1 -
fibre optic system applications - Part 1:
Specification template for essential ratings
and characteristics
IEC 62149-1 - Fibre optic active components and devices EN 62149-1 -
- Performance standards - Part 1: General
and guidance
IEC 62572-3 - Fibre optic active components and devices EN 62572-3 -
- Reliability standards - Part 3: Laser
modules used for telecommunication
ITU-T - Spectral grids for WDM applications: - -
Recommendation DWDM frequency grid
G.694.1
ITU-T - Optical interfaces for equipment and - -
Recommendation systems relating to the synchronous digital
G.957 hierarchy
MIL-STD-883-1 - U.S. Department of Defense - Test method - -
standard - Environmental test methods for
microcircuits, Part 1: Test methods 1000-
IEC 62149-3 ®
Edition 4.0 2023-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic active components and devices – Performance standards –
Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic
transmission systems
Composants et dispositifs actifs fibroniques – Normes de performances –
Partie 3: Émetteurs à diodes laser à modulateur intégré pour systèmes de
transmission fibroniques 40 Gbit/s
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-7189-6
– 2 – IEC 62149-3:2023 © IEC 2023
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviated terms . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms . 7
4 Product parameters . 7
4.1 Absolute limiting ratings . 7
4.2 Operating environment . 8
4.3 Functional specification. 8
4.4 Diagrams . 10
5 Testing . 10
5.1 General . 10
5.2 Characterization testing . 10
5.3 Performance testing . 12
6 Environmental specifications . 14
6.1 General safety . 14
6.2 Laser safety . 14
Bibliography . 15
Figure 1 – Schematic diagram of a modulator-integrated laser diode transmitter . 10
Table 1 – Absolute limiting ratings . 8
Table 2 – Operating environment . 8
Table 3 – Operating conditions for functional specification . 8
Table 4 – Functional specification . 9
Table 5 – Characterization tests . 11
Table 6 – Performance test plan . 12
Table 7 – Recommended performance test failure criteria . 13
IEC 62149-3:2023 © IEC 2023 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PERFORMANCE STANDARDS –
Part 3: Modulator-integrated laser diode transmitters
for 40-Gbit/s fibre optic transmission systems
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications h
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.