iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61169-1:2013/AC:2016-02

(Corrigendum)

Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods

Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods

IEC Corrigendum

Hochfrequenz-Steckverbinder - Teil 1: Fachgrundspezifikation - Allgemeine Anforderungen und Messverfahren

Connecteurs pour fréquences radioélectriques - Partie 1: Spécification générique - Exigences générales et méthodes de mesure

Radiofrekvenčni konektorji - 1. del: Rodovna specifikacija - Splošne zahteve in merilne metode - Popravek AC

Ta del standarda IEC 61169, ki je rodovna specifikacija, se nanaša na radiofrekvenčne konektorje za radiofrekvenčne prenosne vode, ki se uporabljajo v telekomunikacijski, elektronski in podobni opremi. Zagotavlja podlago za področne standarde, ki se uporabljajo za posamezne tipe konektorjev. Namenjen je določitvi enotnih konceptov in postopkov v zvezi s: – terminologijo; – standardnimi vrednostmi in značilnostmi; – preskusnimi in merilnimi postopki v zvezi z električnimi, mehanskimi in podnebnimi lastnostmi; – klasifikacijo konektorjev glede na podnebne preskusne postopke, ki vključujejo temperaturo in vlažnost. Preskusne metode in postopki iz tega standarda so namenjeni preskušanju sprejemljivosti ter homologacijskemu preskušanju.

General Information

Status
Published
Publication Date
18-Feb-2016
ICS
33.120.30 - RF connectors
Technical Committee
CLC/SR 46F - RF and microwave passive components
Drafting Committee
CLC/SR 46F - RF and microwave passive components
Current Stage
6060 - Document made available - Publishing
Start Date
19-Feb-2016
Completion Date
19-Feb-2016
Ref Project
SIST EN 61169-1:2014/AC:2016 - Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods

Relations

Corrects
EN 61169-1:2013 - Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods
Effective Date
23-Feb-2016

Buy Standard

EN 61169-1:2014/AC:2016EN 61169-1:2014/AC:2016
PreviousNext
Corrigendum
EN 61169-1:2014/AC:2016
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hochfrequenz-Steckverbinder - Teil 1: Fachgrundspezifikation - Allgemeine Anforderungen und MessverfahrenConnecteurs pour fréquences radioélectriques - Partie 1: Spécification générique - Exigences générales et méthodes de mesureRadio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods33.120.305)RF connectorsICS:Ta slovenski standard je istoveten z:EN 61169-1:2013/AC:2016-02SIST EN 61169-1:2014/AC:2016en01-maj-2016SIST EN 61169-1:2014/AC:2016SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 61169-1:2013/AC:2016-02
February 2016
ICS 33.120.30 English Version
Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods (IEC 61169-1:2013/COR1:2016)
Connecteurs pour fréquences radioélectriques - Partie 1: Spécification générique - Exigences générales et méthodes de mesure (IEC 61169-1:2013/COR1:2016)
Hochfrequenz-Steckverbinder - Teil 1: Fachgrundspezifikation - Allgemeine Anforderungen und Messverfahren
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61169-10:2024(Main)
Radio-frequency connectors - Part 10: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 3 mm (0,12 in) with snap-on coupling - Characteristic impedance 50 Ω (Type SMB)
SIST EN IEC 61169-10:2024

IEC 61169-10:2024, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for series SMB RF coaxial connectors with snap-on coupling with a characteristic impedance of 50 Ω. This document prescribes mating face dimensions for high performance connectors – grade 2, dimensional details of standard test connectors − grade 0, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to series SMB RF connectors. This document indicates recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H. The series SMB connectors are used to connect with all kinds of RF cables and microstrips in microwave transmission systems. The operating frequency is up to 4 GHz.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63138-2:2023(Main)
Multi-channel radio-frequency connectors - Part 2: Sectional specification for MQ4 series circular connectors
SIST EN IEC 63138-2:2024

IEC 63138-2:2023 is available as IEC 63138-2:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 63138-2:2023, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for MQ4 series circular connectors with four RF channels, as well as a detailed specification of the blank format. An MQ4 series circular connector with 50 Ω nominal impedance has four RF channels which can be engaged and disengaged at the same time. There are two versions of plug connectors, one is a quick-lock version, and the other is a threaded version. The socket connector provides two coupling mechanisms, a quick-lock and a threaded coupling. MQ4 series circular connectors can be used in mobile communication systems and in other communication equipment. This document also specifies the mating face dimensions and gauging information of MQ4 series circular connectors, and tests selected from IEC 63138-1, applicable to all detail specifications relating to MQ4 series circular connectors.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61169-71:2022(Main)
Radio-frequency connectors - Part 71: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 5 mm - Characteristic impedance 50 Ohms - type NEX10®
SIST EN IEC 61169-71:2022

This part of IEC 61169, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connector, typically for use in 50 Ω radio communication systems, type NEX10®. This document describes mating face dimensions for general purpose connectors - grade 2, dimensional details of standard test connectors-grade 1, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to type NEX10® RF coaxial connectors. This specification indicates recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H. The type NEX10® RF coaxial connectors are used with all kinds of RF cables and microstrip circuits in radio frequency transmission systems with operating frequencies up to 20 GHz. NOTE Metric dimension are original dimensions. All undimensioned pictorial configurations are for reference purpose only.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63138-3:2022(Main)
Multi-channel radio frequency connectors - Part 3: Sectional specification for MQ5 series circular connectors
SIST EN IEC 63138-3:2022

IEC 63138-3:2022, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for MQ5 series circular connectors with five RF channels, as well as a detailed specification of the blank format. This document also specifies the mating face dimensions and gauging information of MQ5 series circular connectors, and tests selected from IEC 63138-1, applicable to all detail specifications relating to MQ5 series circular connectors.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63295:2022(Main)
Specification for WB series glass beads with 50 Ω impedance for RF connectors
SIST EN IEC 63295:2022

This document provides the requirements for WB series glass beads with 50 Ω impedance for RF connectors, including, among other, the structure dimensions, IEC type designation, rating and characteristics, and quality assessment. These glass beads are used for the adaption of coaxial systems to microstrip circuits used extensively in microwave communication systems such as TR modules, power modules, integrated circuits where hermetic seal is required. They can serve as a part of an RF coaxial connector, multi-channel RF connector or hybrid connector, or can be applied directly in various communication module systems as an independent product. They provide a 50 Ω normative impedance with an operating frequency limit up to 65 GHz.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61169-17:2022(Main)
Radio-frequency connectors - Part 17: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with screw coupling - Characteristic impedance 50 ohms (Type TNC)
SIST EN IEC 61169-17:2022

IEC 61169-17:2022, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for series TNC RF coaxial connectors with threaded coupling with a characteristic impedance of 50 Ω. This document prescribes mating face dimensions for high performance connectors - grade 2, dimensional details of standard test connectors - grade 0, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to series TNC RF connectors. This document indicates recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61169-21:2022(Main)
Radio-frequency connectors - Part 21: Sectional specification for RF connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with screw coupling - Characteristic impedance 50 ohms (Type SC)
SIST EN IEC 61169-21:2022

This part of IEC 61169, which is a sectional specification (SS), provides information and rules for preparation of detail specification for type SC threaded RF coaxial connectors with 50 Ω characteristic impedance. The connectors are used with flexible and semi-rigid cables. And they are recommended to be utilized in medium power and low reflection applications up to 11 GHz. The dielectric filled interface is especially beneficial in applications involving severe environmental exposure. It prescribes mating face dimensions, dimensional details, gauging information for general connectors - grade 2 and standard test connectors - grade 0 as well as test schedules and inspection requirements selected from IEC 61169-1, applicable to all detail specifications relating to type SC RF connectors. Type SC interface specified in this specification is equivalent to type SC-B interface in IEC 60169-21: 1985. This specification indicates recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H. NOTE: For this part, original dimensions are in inches. All undimensioned pictorial configurations are for reference purpose only.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61169-68:2022(Main)
Radio-frequency connectors - Part 68: Sectional specification for series TRK bayonet coupling triaxial connectors
SIST EN IEC 61169-68:2022

This part of IEC 61169, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for series TRK bayonet coupling triaxial connectors. The series TRK bayonet coupling triaxial connectors having the advantages of quick connection and separation, high reliability, small size, good salt characteristics, four polarizations to prevent error-mate etc., can be connected to symmetrically twisted pair cables or triaxial cables. They have been widely used in 1553B data bus systems or other communication systems for digital signal transmission. It specifies mating face dimensions for series TRK bayonet coupling triaxial connectors, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to series TRK triaxial connectors. This document indicates recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H. NOTE Metric dimension are original dimensions. All undimensioned pictorial configurations are for reference purpose only.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61169-1-6:2022(Main)
Radio-frequency connectors - Part 1-6: Electrical test methods - RF power
SIST EN IEC 61169-1-6:2022

IEC 61169-1-6:2022 provides test methods for RF power rating and power handling of RF connectors at specified frequency, temperature and altitude. This document is applicable to cabled RF connectors, microstrip RF connectors and RF connector adapters. It is also suitable to test RF channels in multi-channel RF connectors and hybrid connectors.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61169-67:2022(Main)
Radio frequency connectors - Part 67: Sectional specification for series TRL threaded triaxial connectors
SIST EN IEC 61169-67:2022

This part of IEC 61169, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for series TRL threaded triaxial connectors. Series TRL threaded triaxial connectors with high reliability, small size, good salt characteristics can be connected with symmetrically twisted pair cables or triaxial cables. It has been used in 1553B data bus systems or other communication systems for digital signal transmission. It prescribes mating face dimensions for series TRL threaded triaxial connectors, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to series TRL threaded triaxial connectors. This specification indicates recommended performance characteristics to be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H. Note: Metric dimensions are original dimensions. All undimensioned pictorial configurations are for reference purpose only.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day