EN 60264-4-1:2010

SLOVENSKI STANDARD
SIST EN 60264-4-1:2011
01-januar-2011
1DGRPHãþD
SIST EN 60264-4-1:2001
Pakiranje navijalnih žic - 4-1. del: Preskusne metode - Dostavne tuljave iz
plastomernih snovi (IEC 60264-4-1:1997 + A1:2009)
Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from
thermoplastic materials (IEC 60264-4-1:1997 + A1:2009)
Verpackung von Wickeldrähten - Teil 4-1: Prüfverfahren - Lieferspulen aus
thermoplastischem Kunststoff (IEC 60264-4-1:1997 + A1:2009)
Conditionnement des fils de bobinage - Partie 4-1: Méthodes d'essai - Bobines de
livraison faites de matériau thermoplastique (CEI 60264-4-1:1997 + A1:2009)
Ta slovenski standard je istoveten z: EN 60264-4-1:2010
ICS:
29.060.10 Žice Wires
55.060 Tulci. Vretena Spools. Bobbins
SIST EN 60264-4-1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60264-4-1:2011

---------------------- Page: 2 ----------------------

SIST EN 60264-4-1:2011

EUROPEAN STANDARD
EN 60264-4-1

NORME EUROPÉENNE
November 2010
EUROPÄISCHE NORM

ICS 29.060.10; 55.060 Supersedes EN 60264-4-1:1994


English version


Packaging of winding wires -
Part 4-1: Methods of test -
Delivery spools made from thermoplastic materials
(IEC 60264-4-1:1997 + A1:2009)


Conditionnement des fils de bobinage -  Verpackung von Wickeldrähten -
Partie 4-1: Méthodes d'essai - Teil 4-1: Prüfverfahren -
Bobines de livraison faites de matériau Lieferspulen aus thermoplastischem
thermoplastique Kunststoff
(CEI 60264-4-1:1997 + A1:2009) (IEC 60264-4-1:1997 + A1:2009)




This European Standard was approved by CENELEC on 2010-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60264-4-1:2010 E

---------------------- Page: 3 ----------------------

SIST EN 60264-4-1:2011
EN 60264-4-1:2010 - 2 -
Foreword
The text of the International Standard IEC 60264-4-1:1997 + A1:2009, prepared by IEC TC 55, Winding
wires, was submitted to the Unique Acceptance Procedure and was approved by CENELEC as
EN 660264-4-1 on 2010-11-01 without any modification.
This European Standard supersedes EN 60264-4-1:1994.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2013-11-01
__________
Endorsement notice
The text of the International Standard IEC 60264-4-1:1997 + A1:2009 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60264-4-1:2011
IEC 60264-4-1
®
Edition 2.1 2009-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Packaging of winding wires –
Part 4-1: Methods of test – Delivery spools made from thermoplastic materials

Conditionnement des fils de bobinage –
Partie 4-1: Méthodes d’essai – Bobines de livraison faites de matériau
thermoplastique

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CB
CODE PRIX
ICS 55.060; 29.060.10 ISBN 2-8318-1043-7
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 ----------------------

SIST EN 60264-4-1:2011
– 2 – 60264-4-1 © IEC:1997+A1:2009
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________

PACKAGING OF WINDING WIRES –

Part 4-1: Methods of test –
Delivery spools made from thermoplastic materials



FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60264-4-1 has been prepared by IEC technical committee 55:
Winding
...