EN 62077:2016

SLOVENSKI STANDARD
01-maj-2016
1DGRPHãþD
SIST EN 62077:2010
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2SWLþQLFLUNXODWRUML5RGRYQD
VSHFLILNDFLMD,(&
Fibre optic interconnecting devices and passive components - Fibre optic circulators -
Generic specification (IEC 62077:2015)
Ta slovenski standard je istoveten z: EN 62077:2016
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 62077
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2016
ICS 33.180.20 Supersedes EN 62077:2010
English Version
Fibre optic interconnecting devices and passive components -
Fibre optic circulators - Generic specification
(IEC 62077:2015)
Dispositifs d'interconnexion et composants passifs à fibres Lichtwellenleiter - Verbindungselemente und passive
optiques - Circulateurs fibroniques - Spécification générique Bauteile - Lichtwellenleiterzirkulatoren -
(IEC 62077:2015) Fachgrundspezifikation
(IEC 62077:2015)
This European Standard was approved by CENELEC on 2015-12-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62077:2016 E
European foreword
The text of document 86B/3862/CDV, future edition 3 of IEC 62077, prepared by SC 86B "Fibre optic
interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 62077:2016.
The following dates are fixed:
(dop) 2016-09-09
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2016-12-09
• latest date by which the national standards conflicting with
the document have to be withdrawn

This document supersedes EN 62077:2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62077:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068 NOTE Harmonized in EN 60068 series.
IEC 61300-2 NOTE Harmonized in EN 61300-2 series.
IEC 61300-3 NOTE Harmonized in EN 61300-3 series.
IEC 61753 NOTE Harmonized in EN 61753 series.
IEC 61754 NOTE Harmonized in EN 61754 series.
IEC 61978-1 NOTE Harmonized as EN 61978-1.
IEC 62005 NOTE Harmonized in EN 62005 series.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60027 series Letter symbols to be used in electrical EN 60027 series
technology
IEC 60050-731 -  International Electrotechnical - -
Vocabulary -
Chapter 731: Optical fibre
communication
IEC 60617 -  Graphical symbols for diagrams - -
IEC 60695-11-5 -  Fire hazard testing - EN 60695-11-5 -
Part 11-5: Test flames - Needle-flame
test method - Apparatus, confirmatory
test arrangement and guidance
IEC 60825 series Safety of laser products EN 60825 series
IEC 61300 series Fibre optic interconnecting devices and EN 61300 series
passive components - Basic test and
measurement procedures
IEC/TR 61930 -  Fibre optic graphical symbology - -
ISO 129-1 -  Technical drawings - Indication of - -
dimensions and tolerances -
Part 1: General principles
ISO 286-1 -  Geometrical product specifications EN ISO 286-1 -
(GPS) - ISO code system for tolerances
on linear sizes -
Part 1: Basis of tolerances, deviations
and fits
ISO 1101 -  Geometrical product specifications EN ISO 1101 -
(GPS) - Geometrical tolerancing -
Tolerances of form, orientation, location
and run-out
ISO 8601 -  Data elements and interchange - -
formats - Information interchange -
Representation of dates and times

IEC 62077 ®
Edition 3.0 2015-11
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Fibre optic

circulators – Generic specification

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.180.20 ISBN 978-2-8322-2988-0

– 2 – IEC 62077:2015  IEC 2015
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
3.1 Basic terms . 7
3.2 Component terms. 8
3.3 Performance parameters . 8
4 Requirements . 10
4.1 Classification . 10
4.1.1 General . 10
4.1.2 Type . 11
4.1.3 Style . 11
4.1.4 Variant . 12
4.1.5 Normative reference extensions. 12
4.2 Documentation . 13
4.2.1 Symbols . 13
4.2.2 Specification system . 13
4.2.3 Drawings . 15
4.2.4 Tests and measurements . 15
4.2.5 Test reports . 16
4.2.6 Instructions for use . 16
4.3 Standardization system . 16
4.3.1 Interface standards . 16
4.3.2 Performance standards . 17
4.3.3 Reliability standards . 17
4.3.4 Interlinking . 18
4.4 Design and construction . 19
4.4.1 Materials . 19
4.4.2 Workmanship . 19
4.5 Performance . 19
4.6 Identification and marking . 19
4.6.1 General . 19
4.6.2 Variant identification number . 19
4.6.3 Component marking . 20
4.6.4 Package marking . 20
4.7 Packaging . 20
4.8 Storage conditions . 20
4.9 Safety . 21
Annex A (informative) Example of technology of bulk circulator based on magneto-
optic effect . 22
Annex B (informative) Example of application of a circulator . 23
Bibliography . 24

Figure 1 – Completely circulated type configuration . 8
Figure 2 – Incompletely circulated type configuration . 8

IEC 62077:2015  IEC 2015 – 3 –
Figure 3 – Insertion loss . 9
Figure 4 – Isolation . 9
Figure 5 – Optical circulator style configurations . 12
Figure 6 – Standards currently under preparation . 18
Figure 7 – Example of a variant identification number . 20
Figure A.1 – Example of a circulator . 22
Figure B.1 – Example of application of a circulator . 23

Table 1 – Example of a typical circulator set classification . 11
Table 2 – The IEC specification structure . 14
Table 3 – Standards interlink matrix . 19

– 4 – IEC 62077:2015  IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING
DEVICES AND PASSIVE COMPONENTS –
FIBRE OPTIC CIRCULATORS – GENERIC SPECIFICATION

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to
...