EN 60300-3-3:2017

SLOVENSKI STANDARD
01-julij-2017
1DGRPHãþD
SIST EN 60300-3-3:2007
8SUDYOMDQMH]DJRWRYOMLYRVWLGHO9RGLOR]DXSRUDER,]UDþXQVWURãNRYY
åLYOMHQMVNHPFLNOX,(&
Dependability management - Part 3-3: Application guide - Life cycle costing (IEC 60300-
3-3:2017)
Zuverlässigkeitsmanagement - Teil 3-3: Anwendungsleitfaden - Lebenszykluskosten
(IEC 60300-3-3:2017)
Gestion de la sûreté de fonctionnement - Partie 3-3: Guide d'application - Evaluation du
coût de vie (IEC 60300-3-3:2017)
Ta slovenski standard je istoveten z: EN 60300-3-3:2017
ICS:
03.120.01 Kakovost na splošno Quality in general
21.020 =QDþLOQRVWLLQQDþUWRYDQMH Characteristics and design of
VWURMHYDSDUDWRYRSUHPH machines, apparatus,
equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60300-3-3

NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2017
ICS 21.020 Supersedes EN 60300-3-3:2004
English Version
Dependability management -
Part 3-3: Application guide - Life cycle costing
(IEC 60300-3-3:2017)
Gestion de la sûreté de fonctionnement - Partie 3-3: Guide Zuverlässigkeitsmanagement - Teil 3-3:
d'application - Évaluation du coût du cycle de vie Anwendungsleitfaden - Lebenszykluskosten
(IEC 60300-3-3:2017) (IEC 60300-3-3:2017)
This European Standard was approved by CENELEC on 2017-03-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60300-3-3:2017 E
European foreword
The text of document 56/1713/FDIS, future edition 3 of IEC 60300-3-3, prepared by IEC/TC 56
"Dependability" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2017-12-03
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2020-03-03
• latest date by which the national standards conflicting with
the document have to be withdrawn

This document supersedes EN 60300-3-3:2004.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60300-3-3:2017 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60300-1:2014 NOTE Harmonized as EN 60300-1:2014 (not modified).
IEC 62402 NOTE Harmonized as EN 62402.
IEC 62508 NOTE Harmonized as EN 62508.
IEC 62198 NOTE Harmonized as EN 62198.
IEC 61014 NOTE Harmonized as EN 61014.
IEC/ISO 31010 NOTE Harmonized as EN 31010.

IEC 60300-3-3 ®
Edition 3.0 2017-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Dependability management –
Part 3-3: Application guide – Life cycle costing

Gestion de la sûreté de fonctionnement –

Partie 3-3: Guide d’application – Évaluation du coût du cycle de vie

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 21.020 ISBN 978-2-8322-3886-8

– 2 – IEC 60300-3-3:2017 © IEC 2017
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms, definitions and abbreviated terms . 8
3.1 Terms and definitions . 8
3.2 Abbreviated terms . 11
4 Concepts of life cycle costing . 11
4.1 Objectives of life cycle costing . 11
4.2 Application of life cycle costing . 12
4.3 Factors influencing LCC . 13
4.4 Factors related to dependability . 13
5 Life cycle costing process . 14
5.1 General . 14
5.2 Establish the organizational context . 14
5.2.1 Formulate the context . 14
5.2.2 Identify alternatives . 16
5.3 Plan the analysis . 16
5.3.1 Define scope and objectives of the analysis . 16
5.3.2 Define analysis tasks and identify contributing personnel . 16
5.3.3 Identify constraints . 17
5.3.4 Identify relevant financial parameters . 17
5.4 Define the analysis approach . 18
5.4.1 Establish rules/methodology . 18
5.4.2 Select or develop an LCC model . 18
5.4.3 Define the cost breakdown structure . 19
5.4.4 Identify areas of uncertainty . 20
5.5 Perform the analysis . 21
5.5.1 Establish methods for estimating cost elements . 21
5.5.2 Collect cost data . 21
5.5.3 Aggregate cost per item for each stage or time period . 22
5.5.4 Perform LCC and sensitivity analysis . 22
5.5.5 Review analysis . 22
5.5.6 Assess achievement of analysis objectives . 22
6 Finalize the analysis . 23
6.1 Identify follow-up actions . 23
6.2 Document analysis . 23
Annex A (informative) Life cycle costing and the life cycle . 24
A.1 General . 24
A.2 Typical LCC analyses . 25
A.3 Committed versus actual costs . 25
Annex B (informative) Financial concepts . 27
B.1 General . 27
B.2 Consequential costs . 27
B.3 Warranty costs . 28
B.4 Liability costs . 28

IEC 60300-3-3:2017 © IEC 2017 – 3 –
B.5 Opportunity costs, discounting, inflation and taxation . 29
B.5.1 General . 29
B.5.2 Opportunity costs. 29
B.5.3 Taxation . 29
B.5.4 Exchange rate . 29
B.5.5 Generally accepted accounting principles . 29
Annex C (informative) Application of financial evaluation techniques . 30
C.1 General . 30
C.2 Discounted cash flow (DCF) . 30
C.3 Internal rate of return (IRR) . 30
C.4 Depreciation and amortization . 30
C.5 Cost-benefit analysis . 30
C.6 Time value of money . 31
Annex D (informative) Cost breakdown structures by life cycle stage . 32
D.1 General . 32
D.2 Life cycle stage cost element . 32
D.2.1 General . 32
D.2.2 Concept . 32
D.2.3 Development . 32
D.2.4 Realization . 33
D.2.5 Utilization . 33
D.2.6 Enhancement . 34
D.2.7 Retirement . 34
D.3 Cost element explanation . 34
D.3.1 General . 34
D.3.2 Project management . 35
D.3.3 Engineering . 35
D.3.4 Producibility engineering and planning . 35
D.3.5 Manufacturing . 35
D.3.6 Facilities . 35
D.3.7 Support and test equipment .
...