EN IEC 60794-1-213:2024
(Main)Optical fibre cables - Part 1-213: Generic specification - Basic optical cable test procedures - Environmental test methods - Microduct pressure withstand, method F13
Optical fibre cables - Part 1-213: Generic specification - Basic optical cable test procedures - Environmental test methods - Microduct pressure withstand, method F13
IEC 60794-1-213:2024 defines test procedures to be used in establishing uniform requirements for the environmental performance of microduct. The test determines the capability of the microduct to withstand internal pressure without leakage and visible damage. This document applies to microduct used for installation of microduct cable or fibre unit by blowing. Throughout this document, the wording "microduct" can also include protected microduct(s). See IEC 60794-1-2 for a reference guide to test methods of all types and for general requirements and definitions.This document partially cancels and replaces IEC 60794-1-22:2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 60794-1-22:2017: a) pressure gauge used to monitor internal pressure of microduct added as part of the test apparatus; b) "test temperature" added to the details to be specified; c) added a new subclause “4.7 Details to be reported”.
Lichtwellenleiterkabel - Teil 1-213: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Umweltprüfverfahren - Druckfestigkeit von Mikrorohren, Verfahren F13
Câbles à fibres optiques - Partie 1-213: Spécification générique - Procédures fondamentales d'essais des câbles optiques - Méthodes d'essais d'environnement - Tenue à la pression des microconduits, méthode F13
IEC 60794-1-213:2024 définit les procédures d’essai à utiliser afin d'établir des exigences uniformes applicables aux performances environnementales des microconduits. Cet essai détermine la capacité des microconduits à résister à la pression interne sans fuite ni dommages visibles. Le présent document s'applique aux microconduits utilisés pour l'installation par soufflage des câbles en microconduits ou des unités de fibres. Dans l'ensemble du document, le terme "microconduit" peut aussi englober les microconduits protégés. Voir l’IEC 60794-1-2 à titre de guide de référence pour les méthodes d'essai de tous les types et concernant les exigences générales et les définitions. Le présent document annule et remplace l'IEC 60794-1-22:2017. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'IEC 60794-1-22:2017: a) manomètre utilisé pour surveiller la pression interne des microconduits, ajouté en tant qu'élément de l'appareillage d'essai; b) "température d'essai" ajoutée dans les informations détaillées à spécifier; c) ajout d’un nouveau paragraphe 4.7 "Informations détaillées à consigner".
Optični kabli - 1-213. del: Splošna specifikacija - Osnovni preskusni postopki za optične kable - Okoljske preskusne metode - Odpornost mikrokanalov na pritisk, metoda F13 (IEC 60794-1-213:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 60794-1-213:2023
01-september-2023
Optični kabli - 1-213. del: Splošna specifikacija - Osnovni preskusni postopki za
optične kable - Okoljske preskusne metode - Odpornost mikrokanalov na pritisk,
metoda F13
Optical fibre cables - Part 1-213: Generic specification - Basic optical cable test
procedures - Environmental test methods - Microduct pressure withstand, Method F13
Ta slovenski standard je istoveten z: prEN IEC 60794-1-213:2023
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
oSIST prEN IEC 60794-1-213:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 60794-1-213:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60794-1-213:2023
86A/2331/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60794-1-213 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-06-30 2023-09-22
SUPERSEDES DOCUMENTS:
86A/2251/CD, 86A/2320/CC
IEC SC 86A : FIBRES AND CABLES
SECRETARIAT: SECRETARY:
France Mr Laurent Gasca
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the
final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Optical fibre cables - Part 1-213: Generic specification - Basic optical cable test procedures -
Environmental test methods - Microduct pressure withstand, Method F13
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60794-1-213:2023
IEC CDV 60794-1-213/Ed1 © IEC 2023 – 2 – 86A/2331/CDV
1 CONTENTS
2
3 FOREWORD . 3
4 1 Scope . 5
5 2 Normative references . 5
6 3 Terms and definitions . 5
7 4 Method F13 – Microduct pressure withstand . 5
8 4.1 Object . 5
9 4.2 Sample . 5
10 4.3 Apparatus . 6
11 4.4 Procedure . 6
12 4.5 Requirements . 6
13 4.6 Details to be specified . 6
14
---------------------- Page: 4 ----------------------
oSIST prEN IEC 60794-1-213:2023
IEC CDV 60794-1-213/Ed1 © IEC 2023 – 3 – 86A/2331/CDV
15 INTERNATIONAL ELECTROTECHNICAL COMMISSION
16 ____________
17
18 OPTICAL FIBRE CABLES –
19
20 Part 1-213: Generic specification –
21 Basic optical cable test procedures –
22 Environmental test methods -
23 Microduct pressure with
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.