EN 50163:2004/A1:2007
(Amendment)Railway applications - Supply voltages of traction systems
Railway applications - Supply voltages of traction systems
Voted as prAA
2013: Originator of XML version: first setup pilot of CCMC in 2012
Bahnanwendungen - Speisespannungen von Bahnnetzen
Applications ferroviaires - Tensions d'alimentation des réseaux de traction
Železniške naprave – Napajalne napetosti sistemov električne vleke
Ta evropski standard določa glavne značilnosti napajalnih napetosti sistemov električne vleke, npr. nepremičnih naprav za vleko, vključno s pomožnimi napravami, ki se napajajo prek kontaktnega vodnika, in železniških vozil, za: – železnice; – vodene sisteme javnega prevoza, kot so tramvaji, dvignjene in podzemne železnice, gorske železnice in trolejbusni sistemi; – sisteme za prevoz materiala. Ta evropski standard se ne uporablja za – vlečne sisteme za podzemne rudnike, – žerjave, prestavljive ploščadi in podobno prevozno opremo na tirih, začasne konstrukcije (npr. razstavne konstrukcije), pod pogojem, da se ne napajajo neposredno ali prek transformatorjev iz sistema kontaktnega vodnika ter jih ne ogroža vlečni napajalni sistem, – obešene nihalne žičnice, – tirne vzpenjače.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2007
äHOH]QLãNHQDSUDYH±1DSDMDOQHQDSHWRVWLVLVWHPRYHOHNWULþQHYOHNH
Railway applications - Supply voltages of traction systems
Bahnanwendungen - Speisespannungen von Bahnnetzen
Applications ferroviaires - Tensions d'alimentation des rseaux de traction
Ta slovenski standard je istoveten z: EN 50163:2004/A1:2007
ICS:
29.280 (OHNWULþQDYOHþQDRSUHPD Electric traction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 50163/A1
NORME EUROPÉENNE
July 2007
EUROPÄISCHE NORM
ICS 29.280
English version
Railway applications -
Supply voltages of traction systems
Applications ferroviaires - Bahnanwendungen -
Tensions d'alimentation Speisespannungen
des réseaux de traction von Bahnnetzen
This amendment A1 modifies the European Standard EN 50163:2004; it was approved by CENELEC on
2007-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.