EN IEC 60730-2-8:2020/A1:2021

SLOVENSKI STANDARD
01-februar-2022
Avtomatske električne krmilne naprave - 2-8. del: Posebne zahteve za električne
vodne ventile, vključno z mehanskimi zahtevami
Automatic electrical controls - Part 2-8: Particular requirements for electrically operated
water valves, including mechanical requirements
Dispositifs de commande électrique automatiques - Partie 2-8: Exigences particulières
pour les électrovannes hydrauliques, y compris les exigences mécaniques
Ta slovenski standard je istoveten z: EN IEC 60730-2-8:2020/A1:2021
ICS:
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60730-2-8:2020/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2021
ICS 97.120
English Version
Automatic electrical controls - Part 2-8: Particular requirements
for electrically operated water valves, including mechanical
requirements
(IEC 60730-2-8:2018/AMD1:2021)
Dispositifs de commande électrique automatiques - Partie Automatische elektrische Regel- und Steuergeräte - Teil 2-
2-8: Exigences particulières pour les électrovannes 8: Besondere Anforderungen an elektrisch betriebene
hydrauliques, y compris les exigences mécaniques Wasserventile, einschließlich mechanischer Anforderungen
(IEC 60730-2-8:2018/AMD1:2021) (IEC 60730-2-8:2018/AMD1:2021)
This amendment A1 modifies the European Standard EN IEC 60730-2-8:2020; it was approved by CENELEC on 2021-11-29. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60730-2-8:2020/A1:2021 E

European foreword
The text of document 72/1257/CDV, future IEC 60730-2-8/AMD1, prepared by IEC/TC 72 “Automatic
electrical controls” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–08–29
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–11–29
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60730-2-8:2018/AMD1:2021 was approved by CENELEC
as a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
The Annex ZA of EN IEC 60730-2-8:2020 applies with the following changes:
Publication Year Title EN/HD Year
Replace the following reference:
ISO 630 - Structural steels - Plates, wide flats, bars, - -
sections and profiles
With the following new reference:
ISO 630-2 2011 Structural steels – Part 2: Technical - -
delivery conditions for structural steels for
general purposes
IEC 60730-2-8 ®
Edition 3.0 2021-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
Automatic electrical controls –

Part 2-8: Particular requirements for electrically operated water valves,

including mechanical requirements

Dispositifs de commande électrique automatiques –

Partie 2-8: Exigences particulières pour les électrovannes hydrauliques,

y compris les exigences mécaniques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 97.120 ISBN 978-2-8322-1017-6

– 2 – IEC 60730-2-8:2018/AMD1:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
AUTOMATIC ELECTRICAL CONTROLS –

Part 2-8:
Particular requirements for electrically operated
water valves, including mechanical requirements

AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non
...