EN 60811-100:2012

SLOVENSKI STANDARD
01-september-2012
(OHNWULþQLLQRSWLþQLNDEOL3UHVNXãHYDOQHPHWRGH]DQHNRYLQVNHPDWHULDOH
GHO6SORãQR
Electric and optical fibre cables - Test methods for non-metallic materials - Part 100:
General
Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene
Werkstoffe - Teil 100: Allgemeines
Câbles électriques et câbles à fibres optiques - Méthodes d'essai pour les matériaux non
-métalliques - Partie 100: Généralités
Ta slovenski standard je istoveten z: EN 60811-100:2012
ICS:
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
29.060.20 Kabli Cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60811-100
NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM
ICS 29.035.01; 29.060.20 Supersedes EN 60811-1-1:1995 (partially) + A1:2001 (partially), EN 60811-1-2:1995 (partially)
+ A2:2000 (partially), EN 60811-1-3:1995 (partially) + A1:2001 (partially), EN 60811-1-4:1995
(partially) + A2:2001 (partially), EN 60811-2-1:1998 (partially) + A1:2001 (partially), EN 60811-
3-1:1995 (partially) + A1:1996 (partially) + A2:2001 (partially), EN 60811-3-2:1995 (partially) +
A2:2004 (partially), EN 60811-4-1:2004 (partially), EN 60811-4-2:2004 (partially), EN 60811-5-
1:1999 (partially) + A1:2004 (partially)

English version
Electric and optical fibre cables -
Test methods for non-metallic materials -
Part 100: General
(IEC 60811-100:2012)
Câbles électriques et à fibres optiques -  Kabel, isolierte Leitungen und
Méthodes d'essai pour les matériaux non- Glasfaserkabel -
métalliques - Prüfverfahren für nichtmetallene
Partie 100: Généralités Werkstoffe -
(CEI 60811-100:2012) Teil 100: Allgemeines
(IEC 60811-100:2012)
This European Standard was approved by CENELEC on 2012-04-16. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60811-100:2012 E
Foreword
The text of document 20/1279/FDIS, future edition 1 of IEC 60811-100, prepared by IEC/TC 20 "Electric
cables" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
(dop) 2013-01-16
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-04-16
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60811-1-1:1995 (partially) + A1:2001 (partially), EN 60811-1-2:1995
(partially) + A2:2000 (partially), EN 60811-1-3:1995 (partially) + A1:2001 (partially), EN 60811-1-4:1995
(partially) + A2:2001 (partially), EN 60811-2-1:1998 (partially) + A1:2001 (partially), EN 60811-3-1:1995
(partially) + A1:1996 (partially) + A2:2001 (partially), EN 60811-3-2:1995 (partially) + A2:2004 (partially),
EN 60811-4-1:2004 (partially), EN 60811-4-2:2004 (partially), EN 60811-5-1:1999 (partially) + A1:2004
(partially).
detailed explanation is provided in the Introduction. Annex A provides full information on the relation
between the current and the previous series.
This revised series of EN 60811 is based upon the principle of “one test – one part”. One significant
technical change that now applies throughout the series is a defined minimum scheme for the
presentation of test reports.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed
for Use within Certain Voltage Limits (LVD - 2006/95/EC)
Endorsement notice
The text of the International Standard IEC 60811-100:2012 was approved by CENELEC as a European
Standard without any modification.

- 3 - EN 60811-100:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60050-461 - International Electrotechnical Vocabulary - - -
Part 461: Electric cables
IEC 60502-1 - Power cables with extruded insulation and - -
their accessories for rated voltages from 1 kV
(U = 1,2 kV) up to 30 kV (U = 36 kV) -
m m
Part 1: Cables for rated voltages of 1 kV (U =
m
1,2 kV) and 3 kV (U = 3,6 kV)
m
IEC 60811-100 ®
Edition 1.0 2012-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electric and optical fibre cables – Test methods for non-metallic materials –

Part 100: General
Câbles électriques et à fibres optiques – Méthodes d’essai pour les matériaux

non-métalliques –
Partie 100: Généralités
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX L
ICS 29.035.01; 29.060.20 ISBN 978-2-88912-955-3

– 2 – 60811-100  IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Test values . 6
5 Applicability . 6
6 Type tests and other tests . 7
7 Test report. 7
Annex A (informative) Structure and content of IEC 60811 . 8

Table A.1 – Parts and their previous reference . 8
Table A.2 – Cross-reference for original parts and clauses . 10

60811-100  IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRIC AND OPTICAL FIBRE CABLES –
TEST METHODS FOR NON-METALLIC MATERIALS –

Part 100: General
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60811-100 has been prepared by IEC technical committee 20:
Electric cables.
This first edition of IEC 60811-100 collects together general matters that apply to the
restructured IEC 60811 series. A detailed explanation is provided in the Introduction. Annex A
provides full information on the relation between the current and the previous series.
This revised series of IEC 60811 is based upon the principle of “one test – one part”. One
significant technical change that now applies throughout the series is a defined minimum
scheme for the presentation of test reports.

– 4 – 60811-100  IEC:2012
The text of this standard is based on the following documents:
FDIS Report on voting
20/1279/FDIS 20/1328/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 60811 series, published under the general title Electric and
optical fibre cables – Test methods for non-metallic materials, can be found on the IEC
website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
60811-100  IEC:2012 – 5 –
INTRODUCTION
The IEC 60811 series specifies the test methods to be used for testing non-metallic materials
of all types of cables. These test methods are intended to be referenced in standards for
c
...