prEN IEC 60898-3:2023

SLOVENSKI STANDARD
01-september-2023
Električni pribor - Odklopniki za nadtokovno zaščito za gospodinjske in podobne
inštalacije - 3. del: Odklopniki za enosmerni tok (IEC 60898-3:2019)
Electrical accessories - Circuit-breakers for overcurrent protection for household and
similar installations - Part 3: Circuit-breakers for DC operation (IEC 60898-3:2019)
Elektrisches Installationsmaterial - Leitungsschutzschalter für Hausinstallationen und
ähnliche Zwecke - Teil 3: Leitungsschutzschalter für Gleichstrom (DC) (IEC 60898-
3:2019)
Petit appareillage électrique - disjoncteurs pour la protection contre les surintensités pour
installations domestiques et analogues - Partie 3: Disjoncteurs pour le fonctionnement
en courant continu (IEC 60898-3:2019)
Ta slovenski standard je istoveten z: prEN IEC 60898-3:2023
ICS:
29.120.50 Varovalke in druga Fuses and other overcurrent
nadtokovna zaščita protection devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD DRAFT
prEN IEC 60898-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2023
ICS 29.120.50 -
English Version
Electrical accessories - Circuit-breakers for overcurrent
protection for household and similar installations - Part 3: Circuit-
breakers for DC operation
(IEC 60898-3:2019)
Petit appareillage électrique - disjoncteurs pour la protection Elektrisches Installationsmaterial - Leitungsschutzschalter
contre les surintensités pour installations domestiques et für Hausinstallationen und ähnliche Zwecke - Teil 3:
analogues - Partie 3: Disjoncteurs pour le fonctionnement Leitungsschutzschalter für Gleichstrom (DC)
en courant continu (IEC 60898-3:2019)
(IEC 60898-3:2019)
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2023-10-20.

The text of this draft consists of the text of IEC 60898-3:2019 (23E/1122/FDIS).

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 77672 Ref. No. prEN IEC 60898-3:2023 E

European foreword
This document (prEN IEC 60898-3:2023) consists of the text of document IEC 60898-3:2019, prepared
by SC 23E "Circuit-breakers and similar equipment for household use" of IEC/TC 23 "Electrical
accessories".
This document is currently submitted to the Enquiry.
The following dates are proposed:
• latest date by which the existence of this document (doa) dor + 6 months
has to be announced at national level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to be withdrawn (to be confirmed or
modified when voting)
This document is read in conjunction with prEN IEC 60898-3:2023/prA1:2023 and
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association, and supports essential requirements
of EU Directive(s) / Regulation(s).
For relationship with EU Directive(s) / Regulation(s), see informative Annex ZZ, which is an integral part
of prEN IEC 60898-3:2023/prAA:2023.

IEC 60898-3 ®
Edition 1.0 2019-04
INTERNATIONAL
STANDARD
Electrical accessories – Circuit-breakers for overcurrent protection for

household and similar installations –

Part 3: Circuit-breakers for DC operation

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.120.50 ISBN 978-2-8322-6676-2

– 2 – IEC 60898-3:2019 © IEC 2019
CONTENTS
FOREWORD . 9
1 Scope . 11
2 Normative references . 12
3 Terms and definitions . 12
3.1 Devices . 13
3.2 General terms . 13
3.3 Constructional elements . 15
3.4 Conditions of operation . 18
3.5 Characteristic quantities . 19
3.6 Definitions related to insulation co-ordination . 23
4 Classification . 25
4.1 General . 25
4.2 According to the number of poles . 25
4.3 According to the current direction through the poles. 25
4.4 According to the protection against external influences . 26
4.5 According to the method of mounting . 26
4.6 According to the methods of connection . 26
4.6.1 According to the fixation system . 26
4.6.2 According to the type of terminals . 26
4.7 According to the instantaneous tripping current (see 3.5.18) . 26
5 Characteristics of circuit-breakers. 26
5.1 List of characteristics . 26
5.2 Rated quantities . 27
5.2.1 Rated voltages . 27
5.2.2 Rated direct current (I ) . 27
n
5.2.3 Rated short-circuit capacity (I ) . 27
cn
5.2.4 Rated making and breaking capacity of an individual pole (I ) . 27
cn1
5.3 Standard and preferred values . 28
5.3.1 Preferred values of rated voltage . 28
5.3.2 Preferred values of rated current . 28
5.3.3 Values of rated short-circuit capacity . 28
5.3.4 Standard ranges of instantaneous tripping . 28
5.3.5 Standard value of rated impulse withstand voltage (U ) . 28
imp
6 Marking and other product information . 29
7 Standard conditions for operation in service . 30
7.1 General . 30
7.2 Ambient air temperature range . 30
7.3 Altitude . 31
7.4 Atmospheric conditions . 31
7.5 Conditions of installation . 31
7.6 Pollution degree . 31
8 Requirements for construction and operation . 31
8.1 Mechanical design . 31
8.1.1 General . 31
8.1.2 Mechanism . 31
8.1.3 Clearances and creepage distances (see Annex A) . 33

IEC 60898-3:2019 © IEC 2019 – 3 –
8.1.4 Screws, current-carrying parts and connections . 35
8.1.5 Terminals for external conductors . 36
8.1.6 Non-interchangeability . 38
8.1.7 Mechanical mounting of plug-in type circuit-breakers . 39
8.2 Protection against electric shock . 39
8.3 Dielectric properties and isolating capability . 39
8.3.1 General . 39
8.3.2 Dielectric properties . 40
8.3.3 Isolating capability . 40
8.3.4 Dielectric strength at rated impulse withstand voltage (U ) . 40
imp
8.4 Temperature rise . 40
8.4.1 Temperature rise limits . 40
8.4.2 Ambient air temperature . 40
8.5 Uninterrupted duty . 41
8.6 Automatic operation . 41
8.6.1 Standard time-current zone . 41
8.6.2 Conventional quantities . 42
8.6.3 Tripping characteristic . 42
8.7 Mechanical and electrical endurance . 42
8.8 Performance at short-circuit currents and at small DC currents . 43
8.9 Resistance to mechanical shock and impact . 43
8.10 Resistance to heat . 43
8.11 Resistance to abnormal heat and to fire . 43
8.12 Resistance to rusting . 43
8.13 Behaviour in case of making inrush current . 43
8.14 Power loss . 43
8.15 Requirement of small DC currents. 44
9 Tests . 44
9.1 Type tests
...