EN 61300-2-10:2012

SLOVENSKI STANDARD
01-januar-2013
1DGRPHãþD
SIST EN 61300-2-10:1999
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH2VQRYQLSUHVNXãHYDOQLLQPHULOQL
SRVWRSNLGHO3UHVNXVL2GSRUQRVWSURWLGUREOMHQMX,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-10: Tests - Crush resistance (IEC 61300-2-10:2012)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-10: Prüfungen - Querdruck (IEC 61300-2-10:2012
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures - Partie 2-10: Essais - Résistance à la
compression (CEI 61300-2-10:2012
Ta slovenski standard je istoveten z: EN 61300-2-10:2012
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61300-2-10
NORME EUROPÉENNE
November 2012
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 61300-2-10:1997

English version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-10: Tests - Crush resistance
(IEC 61300-2-10:2012)
Dispositifs d'interconnexion et composants Lichtwellenleiter -
passifs à fibres optiques - Verbindungselemente und passive
Méthodes fondamentales d'essais Bauteile -
et de mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-10: Essais - Teil 2-10: Prüfungen -
Résistance à la compression Querdruckbeständigkeit
(CEI 61300-2-10:2012) (IEC 61300-2-10:2012)

This European Standard was approved by CENELEC on 2012-09-13. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-10:2012 E
Foreword
The text of document 86B/3439/FDIS, future edition 2 of IEC 61300-2-10, prepared by SC 86B "Fibre
optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61300-2-10:2012.
The following dates are fixed:
(dop) 2013-06-13
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2013-09-13
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61300-2-10:1997.

EN 61300-2-10:1997:
The changes with respect to the previous edition are to reconsider the entire text.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61300-2-10:2012 was approved by CENELEC as a
European Standard without any modification.

- 3 - EN 61300-2-10:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 61300-1 - Fibre optic interconnecting devices EN 61300-1 -
and passive components - Basic test
and measurement procedures -
Part 1: General and guidance
IEC 61300-2-38 - Fibre optic interconnecting devices EN 61300-2-38 -
and passive components - Basic test
and measurement procedures -
Part 2-38: Tests - Sealing for pressurized
fibre optic closures
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 -
passive components - Basic test and
measurement procedures -
Part 3-1: Examinations and measurements -
Visual examination
IEC 61300-3-4 - Fibre optic interconnecting devices EN 61300-3-4 -
and passive components - Basic test
and measurement procedures -
Part 3-4: Examinations and measurements -
Attenuation
IEC 61300-3-6 - Fibre optic interconnecting devices EN 61300-3-6 -
and passive components - Basic test
and measurement procedures -
Part 3-6: Examinations and measurements -
Return loss
IEC 61300-2-10 ®
Edition 2.0 2012-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures –
Part 2-10: Tests – Crush resistance

Dispositifs d’interconnexion et composants passifs à fibres optiques –

Méthodes fondamentales d’essais et de mesures –

Partie 2-10: Essais – Résistance à la compression

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX G
ICS 33.180.20 ISBN 978-2-83220-307-1

– 2 – 61300-2-10 © IEC:2012
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 General description . 5
4 Apparatus . 5
4.1 General . 5
4.2 Plate . 5
4.3 Pad . 6
4.4 Force generator . 6
4.5 Gauge . 6
5 Procedure. 6
5.1 DUT preparation . 6
5.2 Pre-conditioning . 6
5.3 Initial measurements . 6
5.4 Device mounting . 7
5.5 Conditioning . 7
5.6 Final examinations and measurements . 7
6 Severity . 7
7 Details to be specified .
...